Short answer: the Perlisten A3m. It ranks #43 of 130 bookshelf speakers by sound quality at $3000; the Sonus Faber Sonetto II G2 ranks #103 and costs $3500, which makes this an easy call rather than a real tradeoff.
What the Sonus Faber Sonetto II G2 offers: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Notably more neutral than Sonus Faber’s own Lumina 2, which runs 2-5dB hotter in the treble. Horizontal directivity narrows at a fairly constant, well-behaved rate rather than narrowing-then-widening-then-narrowing like some rivals (including the Lumina 2), meaning sidewall reflections match the direct sound well enough that the reviewer doesn’t recommend sidewall absorption for this speaker. The tweeter-to-woofer crossover handoff around 3kHz looks clean, suggesting a higher-order crossover than typical for the size/price class. Good dynamic range - the low end loses only about 2dB from 76dB to 96dB, otherwise holding up well. Not a difficult amplifier load (about 4.2 ohms minimum impedance). Bass extension reaches a genuine 50Hz in-room, fuller than the Lumina 2. Watch for: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully. A resonance around 700Hz gives vocals a slightly nasal, hollow quality. A dip in the upper midrange (roughly 1-2kHz) reduces perceived detail and attack, while the elevated treble can read as “analytical” or “detailed” to some listeners despite being a coloration rather than true resolution. Needs more clearance from the rear wall than some rivals - about 1.5-2 feet in an ideal room, more or less depending on your specific room modes - or the 80-120Hz region can become boomy. Vertical listening window is limited to about ±10-15° from the tweeter axis. Some unexplained directivity irregularities appear around 1.2kHz and 1.6kHz, possibly port-related, along with a longer decay in the 800Hz-1600Hz range in burst-decay measurements. Multitone distortion approaches the reviewer’s 3% threshold through the midrange, though likely not obviously audible without direct A/B comparison. A resonance in the cabinet appears around 400Hz in impedance measurements.
What the Perlisten A3m offers: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Watch for: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
Buy the Perlisten A3m. It ranks higher for sound quality than the Sonus Faber Sonetto II G2 and costs less, which settles it without a real tradeoff to make.
The Sonus Faber Sonetto II G2 is not a sound-quality pick. It sits near the bottom of the 130 bookshelf speakers; there are better options higher up.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Sonus Faber Sonetto II G2 | Perlisten A3m | |
|---|---|---|
| Price | $3500 per pair | $3,000 per pair |
| Ranked | #103 of 130 in Large Size Bookshelf Speakers | #43 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) | approximately 61Hz (measured, spinorama.org) |
| Bass Extension (-3dB) | 62Hz (measured, Erin's Audio Corner) | 85.8Hz (measured, spinorama.org) |
| Impedance | 4 ohms nominal (4.2 ohms minimum, measured by Erin's Audio Corner) | 4 ohms nominal; 3 ohms minimum |
| Sensitivity | 87dB (measured, Erin's Audio Corner) | 87.4dB at 2.83V/1m |
| Drivers | 1x 6.5" mid-woofer (paper cone), 1x 1.1" (28mm) DAD soft dome tweeter | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter |
| Weight | 38.4 lbs (17.4 kg) | - |
| Dimensions | 16.3"H x 8.9"W x 14"D (414.3 x 227.0 x 355.6 mm) | 26.6 x 11.0 x 13.8 in each |
| Woofer Cabinet | ported, front | - |
| Spinorama Preference Score | 3.34 | 3.39 |
| Spinorama Preference Score with Perfect Sub | 5.62 | 6.42 |
| Enclosure | - | Sealed |
| Maximum SPL | - | 111.4dB peak at 1m (manufacturer specified) |
Related Speaker Comparisons
More worthwhile head-to-heads for Perlisten A3m:
- Perlisten A3m vs Perlisten S4b
- Perlisten A3m vs KEF Reference 1 Meta
- Perlisten A3m vs GR-Research NX-Studio
- AsciLab C6B vs Perlisten A3m
- Audio First Cadentia 3 vs Perlisten A3m
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Sonus Faber Sonetto II G2: $3500 per pair Crutchfield eBay
Pros: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Notably more neutral than Sonus Faber’s own Lumina 2, which runs 2-5dB hotter in the treble. Horizontal directivity narrows at a fairly constant, well-behaved rate rather than narrowing-then-widening-then-narrowing like some rivals (including the Lumina 2), meaning sidewall reflections match the direct sound well enough that the reviewer doesn’t recommend sidewall absorption for this speaker. The tweeter-to-woofer crossover handoff around 3kHz looks clean, suggesting a higher-order crossover than typical for the size/price class. Good dynamic range - the low end loses only about 2dB from 76dB to 96dB, otherwise holding up well. Not a difficult amplifier load (about 4.2 ohms minimum impedance). Bass extension reaches a genuine 50Hz in-room, fuller than the Lumina 2. Measured bass extension of 62Hz (-3dB), with a measured sensitivity of 87dB.
Cons: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully. A resonance around 700Hz gives vocals a slightly nasal, hollow quality. A dip in the upper midrange (roughly 1-2kHz) reduces perceived detail and attack, while the elevated treble can read as “analytical” or “detailed” to some listeners despite being a coloration rather than true resolution. Needs more clearance from the rear wall than some rivals - about 1.5-2 feet in an ideal room, more or less depending on your specific room modes - or the 80-120Hz region can become boomy. Vertical listening window is limited to about ±10-15° from the tweeter axis. Some unexplained directivity irregularities appear around 1.2kHz and 1.6kHz, possibly port-related, along with a longer decay in the 800Hz-1600Hz range in burst-decay measurements. Multitone distortion approaches the reviewer’s 3% threshold through the midrange, though likely not obviously audible without direct A/B comparison. A resonance in the cabinet appears around 400Hz in impedance measurements.
Full Sonus Faber Sonetto II G2 review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 62Hz (measured, Erin's Audio Corner) |
| Dimensions | 16.3"H x 8.9"W x 14"D (414.3 x 227.0 x 355.6 mm) |
| Drivers | 1x 6.5" mid-woofer (paper cone), 1x 1.1" (28mm) DAD soft dome tweeter |
| Impedance | 4 ohms nominal (4.2 ohms minimum, measured by Erin's Audio Corner) |
| Sensitivity | 87dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 3.34 |
| Spinorama Preference Score with Perfect Sub | 5.62 |
| Weight | 38.4 lbs (17.4 kg) |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Sonus Faber Sonetto II G2 vs Audio Craftsmen Victoria
- Sonus Faber Sonetto II G2 vs Pylon Jasper Monitor 18
- Sonus Faber Sonetto II G2 vs KEF Q350
- Sonus Faber Sonetto II G2 vs Emotiva Airmotiv B2+
- Sonus Faber Sonetto II G2 vs Sonus Faber Lumina II Amator
- Sonus Faber Sonetto II G2 vs JBL XPL-90
- Sonus Faber Sonetto II G2 vs Polk Reserve R100
- Sonus Faber Sonetto II G2 vs Klipsch RP-600M
- See all 59 comparisons
Perlisten A3m: $3,000 per pair Perlisten Dealer Network eBay
Pros: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Measured bass extension of 85.8Hz (-3dB).
Cons: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
Full Perlisten A3m review and specifications →
| Bass Extension (-10dB) | approximately 61Hz (measured, spinorama.org) |
|---|---|
| Bass Extension (-3dB) | 85.8Hz (measured, spinorama.org) |
| Dimensions | 26.6 x 11.0 x 13.8 in each |
| Drivers | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter |
| Enclosure | Sealed |
| Impedance | 4 ohms nominal; 3 ohms minimum |
| Maximum SPL | 111.4dB peak at 1m (manufacturer specified) |
| Sensitivity | 87.4dB at 2.83V/1m |
| Spinorama Preference Score | 3.39 |
| Spinorama Preference Score with Perfect Sub | 6.42 |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Perlisten A3m vs ELAC Debut 3.0 DB63
- Perlisten A3m vs Aalto Speakers Aalto 3 Passive
- Perlisten A3m vs Emotiva Airmotiv XB2
- Perlisten A3m vs Ascend Acoustics Sierra-2EX V2
- Perlisten A3m vs Philharmonic BMR (v1)
- Perlisten A3m vs Ascend Acoustics Sierra-LX
- Perlisten A3m vs Wharfedale Linton 85
- Perlisten A3m vs ELAC DBR62
- See all 44 comparisons