Sonus Faber Lumina II vs Sonus Faber Sonetto II G2

Last updated: August 18, 2026

Short answer: the Sonus Faber Lumina II. It ranks #66 of 100 bookshelf speakers by sound quality at $1600; the Sonus Faber Sonetto II G2 ranks #74 and costs $3500, so there is not much of a tradeoff to weigh.

On the Sonus Faber Lumina II side: Handmade in Italy with a gloss-finished front baffle and black leather-wrapped cabinet - genuinely nice-looking speaker with real brand cachet. Set against that: Not a neutral speaker - has a persistent high-frequency boost/lift that makes it sound forward and bright, present whether pointed directly at the listener or toed out.

The case for the Sonus Faber Sonetto II G2: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. The tradeoff: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully.

Buy the Sonus Faber Lumina II. It ranks higher for sound quality than the Sonus Faber Sonetto II G2 and costs less, so there is no real case for the other one.

Sonus Faber Lumina II vs Sonus Faber Sonetto II G2

Specifications Side By Side

Sonus Faber Lumina II Sonus Faber Sonetto II G2
Price$1600$3500
Ranked#66 of 100 in Large Size Bookshelf Speakers#74 of 100 in Large Size Bookshelf Speakers
Drivers29mm DAD dome tweeter, 150mm paper cone mid-woofer1x 6.5" mid-woofer (paper cone), 1x 1.1" (28mm) DAD soft dome tweeter
Crossover Frequency1800Hz-
Dimensions12"H x 7.1"W x 10.3"D (304 x 180 x 263mm)16.3"H x 8.9"W x 14"D (414.3 x 227.0 x 355.6 mm)
Weight12.5 lbs (12.5 lbs / 5.65 kg) each38.4 lbs / 17.4 kg
Impedance4 ohms nominal, 4.1 ohms minimum (measured, Erin’s Audio Corner)4 ohms nominal (4.2 ohms minimum, measured by Erin’s Audio Corner)
Sensitivity86dB (measured average, Erin’s Audio Corner; matches manufacturer spec)87dB (measured, Erin’s Audio Corner)
Bass Extension (-3dB)60Hz (measured, Erin’s Audio Corner)62Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)41Hz (measured, Erin’s Audio Corner)38Hz (measured, Erin’s Audio Corner)
Frequency Response55Hz - 24kHz (manufacturer specified)-
Recommended Power30W - 150W-
Woofer Cabinet-ported, front

More useful head-to-heads from the same speaker class:

The Two Speakers In Full

Sonus Faber Lumina II: $1600 Crutchfield

Sonus Faber Lumina II ranking card

Pros: Handmade in Italy with a gloss-finished front baffle and black leather-wrapped cabinet - genuinely nice-looking speaker with real brand cachet. Bass extension is competitive for the size, reaching about 50 Hz in-room with mild compression and good distortion figures, so higher output levels and greater listening distances aren’t a problem down to that point. About 20 dB of dynamic range at typical listening levels (73 dB at 4m), which comfortably covers most music without the tonal balance shifting as instruments and vocals peak. Off-axis behavior is consistent - toeing the speakers 20-30 degrees out doesn’t meaningfully change the in-room high-frequency character, so placement flexibility is good once you’ve dialed in the tonal balance.

Cons: Not a neutral speaker - has a persistent high-frequency boost/lift that makes it sound forward and bright, present whether pointed directly at the listener or toed out. A slightly nasal quality traced to a resonance around 1 kHz that EQ can address. The reviewer needed to trim treble by about 4 dB on his preamp to get the tonal balance he wanted, meaning most listeners will want equalization available to fully enjoy this speaker. At roughly the same $1,000ish price point, alternatives like the Ascend Acoustics Sierra 1 V2 measure more linear (with a tradeoff in distortion and crossover-region directivity), and the Dynaudio Emit 20 offers deeper bass extension and lower compression at the cost of a more deliberately colored tonal signature.

Bass Extension (-10dB)41Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)60Hz (measured, Erin's Audio Corner)
Crossover Frequency1800Hz
Dimensions12"H x 7.1"W x 10.3"D (304 x 180 x 263mm)
Drivers29mm DAD dome tweeter, 150mm paper cone mid-woofer
Frequency Response55Hz - 24kHz (manufacturer specified)
Impedance4 ohms nominal, 4.1 ohms minimum (measured, Erin's Audio Corner)
Recommended Power30W - 150W
Sensitivity86dB (measured average, Erin's Audio Corner; matches manufacturer spec)
Weight12.5 lbs (12.5 lbs / 5.65 kg) each

As an eBay Partner, we may be compensated if you make a purchase.

Sonus Faber Sonetto II G2: $3500 Crutchfield

Sonus Faber Sonetto II G2 ranking card

Pros: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Notably more neutral than Sonus Faber’s own Lumina 2, which runs 2-5dB hotter in the treble. Horizontal directivity narrows at a fairly constant, well-behaved rate rather than narrowing-then-widening-then-narrowing like some rivals (including the Lumina 2), meaning sidewall reflections match the direct sound well enough that the reviewer doesn’t recommend sidewall absorption for this speaker. The tweeter-to-woofer crossover handoff around 3kHz looks clean, suggesting a higher-order crossover than typical for the size/price class. Good dynamic range - the low end loses only about 2dB from 76dB to 96dB, otherwise holding up well. Not a difficult amplifier load (about 4.2 ohms minimum impedance). Bass extension reaches a genuine 50Hz in-room, fuller than the Lumina 2.

Cons: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully. A resonance around 700Hz gives vocals a slightly nasal, hollow quality. A dip in the upper midrange (roughly 1-2kHz) reduces perceived detail and attack, while the elevated treble can read as “analytical” or “detailed” to some listeners despite being a coloration rather than true resolution. Needs more clearance from the rear wall than some rivals - about 1.5-2 feet in an ideal room, more or less depending on your specific room modes - or the 80-120Hz region can become boomy. Vertical listening window is limited to about ±10-15° from the tweeter axis. Some unexplained directivity irregularities appear around 1.2kHz and 1.6kHz, possibly port-related, along with a longer decay in the 800Hz-1600Hz range in burst-decay measurements. Multitone distortion approaches the reviewer’s 3% threshold through the midrange, though likely not obviously audible without direct A/B comparison. A resonance in the cabinet appears around 400Hz in impedance measurements.

Bass Extension (-10dB)38Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)62Hz (measured, Erin's Audio Corner)
Dimensions16.3"H x 8.9"W x 14"D (414.3 x 227.0 x 355.6 mm)
Drivers1x 6.5" mid-woofer (paper cone), 1x 1.1" (28mm) DAD soft dome tweeter
Impedance4 ohms nominal (4.2 ohms minimum, measured by Erin's Audio Corner)
Sensitivity87dB (measured, Erin's Audio Corner)
Weight38.4 lbs / 17.4 kg
Woofer Cabinetported, front

As an eBay Partner, we may be compensated if you make a purchase.