Short answer: the AsciLab C6B. It ranks #6 of 203 bookshelf speakers by sound quality, rated 4.7/5, at $1,145; the Sonus Faber Lumina II ranks #144, rated 3.4/5, and costs $1,600, so there is little reason to consider the other one.
The case for the Sonus Faber Lumina II: Handmade in Italy with a gloss-finished front baffle and black leather-wrapped cabinet: genuinely nice-looking speaker with real brand cachet. Watch for: Not a neutral speaker: has a persistent high-frequency boost/lift that makes it sound forward and bright, present whether pointed directly at the listener or toed out.
The AsciLab C6B is the more accurate, deeper-bass choice. Two-way design pairing a 1” aluminum ceramic dome tweeter on a large waveguide with a 6” aluminum ceramic cone woofer, crossed over at 1.1kHz, plus a rear passive radiator. Its measured preference score, a predictor of how neutral it sounds, is 6.33 against 3.81 for the Sonus Faber Lumina II. Its bass reaches about 54Hz before falling 3dB, against 60Hz for the Sonus Faber Lumina II. Watch for: Bass rolls off around 50Hz in-room (F3 54Hz, F10 35Hz), so a subwoofer is needed for real extension below that.
Buy the AsciLab C6B. It is rated higher for sound quality than the Sonus Faber Lumina II and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Sonus Faber Lumina II | AsciLab C6B | |
|---|---|---|
| Price | $1,600 per pair | $1145 per pair |
| Ranked | #144 of 203 in Large Size Bookshelf Speakers | #6 of 203 in Large Size Bookshelf Speakers |
| Drivers | 29mm DAD dome tweeter, 150mm paper cone mid-woofer | 6” Aluminium Ceramic Cone with cast Aluminium Chassis woofer, 1” Aluminium Ceramic Dome tweeter |
| Crossover Frequency | 1800Hz | - |
| Dimensions | 12” x 7.1” x 10.4” (304 x 180 x 263 mm) | 15.7”H x 8”W x 10.4”D (398.8 x 203.2 x 264.2 mm) |
| Weight | 12.5 lbs (5.65 kg) each | 18.5 lbs (8.4 kg) each |
| Impedance | 4 ohms nominal, 4.1 ohms minimum (measured, Erin’s Audio Corner) | 4 ohms nominal, 2.6 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 86dB (measured average, Erin’s Audio Corner; matches manufacturer spec) | 85.6dB (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 60Hz (measured, Erin’s Audio Corner) | 54Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) | 35Hz (measured, Erin’s Audio Corner) |
| Frequency Response | 55Hz - 24kHz (manufacturer specified) | - |
| Recommended Power | 30W - 150W | - |
| Spinorama Preference Score | 3.81 | 6.33 |
| Spinorama Preference Score with Perfect Sub | 6.10 | 8.28 |
| DIY Kit | No | No |
| Woofer Cabinet | - | passive radiator |
Related Speaker Comparisons
How AsciLab C6B compares with other leading options:
- AsciLab C6B vs Perlisten S4b
- AsciLab C6B vs KEF Reference 1 Meta
- AsciLab C6B vs GR-Research NX-Studio
- AsciLab C6B vs March Audio Sointuva AWG
- AsciLab C6B vs Audio First Cadentia 3
Prices on this page were last checked October 7, 2026 at 9:25 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Sonus Faber Lumina II: $1,600 per pair Crutchfield eBay
Same family: the Sonus Faber Lumina I (smaller bookshelf, estimated 3.3/5), the Sonus Faber Lumina III (smaller floorstanding, estimated 3.5/5), the Sonus Faber Lumina V (larger floorstanding, estimated 3.6/5) and the Sonus Faber Lumina Center I (center, estimated 3.5/5).
Pros: Handmade in Italy with a gloss-finished front baffle and black leather-wrapped cabinet: genuinely nice-looking speaker with real brand cachet. Bass extension is competitive for the size, reaching about 50 Hz in-room with mild compression and good distortion figures, so higher output levels and greater listening distances aren’t a problem down to that point. About 20 dB of dynamic range at typical listening levels (73 dB at 4m), which comfortably covers most music without the tonal balance shifting as instruments and vocals peak. Off-axis behavior is consistent: toeing the speakers 20-30 degrees out doesn’t meaningfully change the in-room high-frequency character, so placement flexibility is good once you’ve dialed in the tonal balance. Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 86dB.
Cons: Not a neutral speaker: has a persistent high-frequency boost/lift that makes it sound forward and bright, present whether pointed directly at the listener or toed out. A slightly nasal quality traced to a resonance around 1 kHz that EQ can address. The reviewer needed to trim treble by about 4 dB on his preamp to get the tonal balance he wanted, meaning most listeners will want equalization available to fully enjoy this speaker. At roughly the same $1,000ish price point, alternatives like the Ascend Acoustics Sierra 1 V2 measure more linear (with a tradeoff in distortion and crossover-region directivity), and the Dynaudio Emit 20 offers deeper bass extension and lower compression at the cost of a more deliberately colored tonal signature.
Full Sonus Faber Lumina II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | 1800Hz |
| DIY Kit | No |
| Dimensions | 12” x 7.1” x 10.4” (304 x 180 x 263 mm) |
| Drivers | 29mm DAD dome tweeter, 150mm paper cone mid-woofer |
| Frequency Response | 55Hz - 24kHz (manufacturer specified) |
| Impedance | 4 ohms nominal, 4.1 ohms minimum (measured, Erin’s Audio Corner) |
| Recommended Power | 30W - 150W |
| Sensitivity | 86dB (measured average, Erin’s Audio Corner; matches manufacturer spec) |
| Spinorama Preference Score | 3.81 |
| Spinorama Preference Score with Perfect Sub | 6.10 |
| Weight | 12.5 lbs (5.65 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Sonus Faber Lumina II vs Polk Monitor XT20
- Sonus Faber Lumina II vs XTZ Spirit 4
- Sonus Faber Lumina II vs KEF Q3 Meta
- Sonus Faber Lumina II vs Polk Reserve R100
- Sonus Faber Lumina II vs Focal Aria 906
- Sonus Faber Lumina II vs Revel Performa M22
- Sonus Faber Lumina II vs SVS Prime Bookshelf
- Sonus Faber Lumina II vs ELAC Debut 2.0 B6.2
- See all 60 comparisons
AsciLab C6B: $1145 per pair Ascilab eBay
Same family: the AsciLab C5B (smaller bookshelf, rated 4.2/5).
Pros: Two-way design pairing a 1” aluminum ceramic dome tweeter on a large waveguide with a 6” aluminum ceramic cone woofer, crossed over at 1.1kHz, plus a rear passive radiator. Unusual trait: horizontal radiation actually widens at higher frequencies instead of narrowing like most two-way designs, which keeps image focus and soundstage depth consistent whether you toe the speakers in or out (5-10° off-axis was the sweet spot in testing). Vertical radiation also stays wide straight through the 2kHz crossover region, so the sound doesn’t collapse when standing up: unusual at this price. CA2034 measurements show strong on-axis linearity, listening window, early reflections, and directivity. Midrange and tweeter distortion stay very low even at 96dB, holding up against a $5,900 Arendal speaker in that regard despite roughly a 5x price gap. At $1145 shipped to the US, the reviewer calls it the best-value bookshelf speaker he’s tested, rivaling speakers 2-5x the price. Measured bass extension of 54Hz (-3dB), with a measured sensitivity of 85.6dB.
Cons: Bass rolls off around 50Hz in-room (F3 54Hz, F10 35Hz), so a subwoofer is needed for real extension below that. Low-frequency harmonic distortion increases substantially at 96dB versus 86dB, though it’s second-order and less audible than it looks on paper. Minimum impedance dips to 2.6 ohms (EPDR as low as 1.2 ohms), so it wants an amplifier comfortable driving 4-ohm loads, ideally 100W or more. At 102dB, compression noticeably eats into midrange, bass, and some treble output. Shipping to the US adds roughly $200 on top of AsciLab’s list price. Against the reviewer’s reference Audiofirst Fidelia at a similar price, has slightly less lower-midrange body (about 1dB difference) and a smaller perceived soundstage size.
Full AsciLab C6B review and specifications →
| Bass Extension (-10dB) | 35Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 54Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 15.7”H x 8”W x 10.4”D (398.8 x 203.2 x 264.2 mm) |
| Drivers | 6” Aluminium Ceramic Cone with cast Aluminium Chassis woofer, 1” Aluminium Ceramic Dome tweeter |
| Impedance | 4 ohms nominal, 2.6 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 85.6dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 6.33 |
| Spinorama Preference Score with Perfect Sub | 8.28 |
| Weight | 18.5 lbs (8.4 kg) each |
| Woofer Cabinet | passive radiator |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons