Short answer: a tie on sound quality. Both are rated 4.8/5 (#23 and #16 of 450 in-ear headphones), so choose on features and fit.
What the Simgot EW100P does well: In oratory1990’s measurement it earns a preference score of 83 with a deviation of only 1.49 dB, so its single 10mm dynamic driver tracks the Harman target unusually closely. Watch for: A 5.8 dB dip near 9.7 kHz and treble running about 2.4 dB under target between 6 and 10 kHz soften cymbals and string texture, while the 10 to 16 kHz air region is 3.6 dB hot.
What the SoftEars RS10 does well: A crinacle preference score of 84, and across seven hobbyist measurements on squig.link the response stays within 0.1 dB of target from 200 Hz to 3 kHz, so vocals and instruments sound natural. The catch: In squig.link measurements sub-bass sits about 3.2 dB below target from 20 to 60 Hz, so the deepest rumble in electronic and film scores is lighter than a dynamic driver delivers.
Buy the Simgot EW100P or the SoftEars RS10 on features: they are rated the same for sound quality at close to the same price.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| Simgot EW100P | SoftEars RS10 | |
|---|---|---|
| Price | - | $2,099.99 |
| Ranked | #23 of 450 in In-Ear Headphones | #16 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 83 (measured by oratory1990, via AutoEQ) | 84 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 1.49 dB standard deviation | 1.49 dB standard deviation |
| Tonal Tilt | -0.07 (negative is warmer, positive brighter) | -0.03 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.4 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-3.5 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Balanced armature |
| Drivers | 1 x 10mm dynamic | 10 x balanced armature |
| Impedance | 32 ohms | 25 ohms |
| Sensitivity | 122 dB | - |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 20Hz - 40kHz (Manufacturer specified) |
| Built-in Microphone | - | No |
Related Headphone Comparisons
How SoftEars RS10 compares with other leading options:
- SoftEars RS10 vs Moondrop Solis 2
- SoftEars RS10 vs Moondrop Psyche
- ThieAudio Monarch MKIII vs Simgot EW100P
- Moondrop Dark Saber vs Simgot EW100P
- Simgot EW100P vs Simgot SuperMix 4
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Simgot EW100P AliExpress eBay
Pros: In oratory1990’s measurement it earns a preference score of 83 with a deviation of only 1.49 dB, so its single 10mm dynamic driver tracks the Harman target unusually closely. Bass and low mids sit within 1 dB of target and sub-bass is only 2.4 dB down at 30 Hz, giving kick drums real weight without boom. At 32 ohms and 122 dB sensitivity it reaches loud levels from a phone or a basic dongle.
Cons: A 5.8 dB dip near 9.7 kHz and treble running about 2.4 dB under target between 6 and 10 kHz soften cymbals and string texture, while the 10 to 16 kHz air region is 3.6 dB hot. It is wired only and has no microphone for calls.
Full Simgot EW100P review and specifications →
| Released | Apr 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.49 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 83 (measured by oratory1990, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 122 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.4 dB at 30 Hz) |
| Tonal Tilt | -0.07 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.5 dB | 0.70 |
| Peak | 162 Hz | -1.7 dB | 0.67 |
| Peak | 7,485 Hz | +3.1 dB | 1.75 |
| Peak | 634 Hz | +1.2 dB | 1.50 |
| Peak | 5,323 Hz | -1.9 dB | 5.08 |
| High shelf | 10,000 Hz | -5.2 dB | 0.70 |
| Peak | 9,319 Hz | +2.4 dB | 2.15 |
| Peak | 1,359 Hz | -0.7 dB | 1.98 |
| Peak | 3,552 Hz | -0.4 dB | 2.15 |
| Peak | 877 Hz | +0.5 dB | 3.25 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
SoftEars RS10: $2,099.99 HiFiGo eBay
Pros: A crinacle preference score of 84, and across seven hobbyist measurements on squig.link the response stays within 0.1 dB of target from 200 Hz to 3 kHz, so vocals and instruments sound natural. Ten balanced armature drivers per side deliver a smooth 1.49 dB standard deviation from target. It rates well above the Shuoer Cadenza 12, a rival at a similar price.
Cons: In squig.link measurements sub-bass sits about 3.2 dB below target from 20 to 60 Hz, so the deepest rumble in electronic and film scores is lighter than a dynamic driver delivers. A 5 dB peak near 7.9 kHz next to a 6.2 dB dip near 10.6 kHz can make some cymbals and sibilants stand out while the air above them fades.
Full SoftEars RS10 review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.49 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 10 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 84 (measured by crinacle, via AutoEQ) |
| Impedance | 25 ohms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.5 dB at 30 Hz) |
| Tonal Tilt | -0.03 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.5 dB | 0.70 |
| Peak | 9,243 Hz | +3.7 dB | 2.06 |
| Peak | 3,129 Hz | -1.6 dB | 0.48 |
| Peak | 5,594 Hz | +4.0 dB | 3.62 |
| Peak | 828 Hz | +1.3 dB | 1.70 |
| High shelf | 10,000 Hz | -2.0 dB | 0.70 |
| Peak | 137 Hz | -0.6 dB | 1.76 |
| Peak | 8,268 Hz | +1.1 dB | 5.96 |
| Peak | 3,787 Hz | -0.3 dB | 5.52 |
| Peak | 481 Hz | +0.2 dB | 2.43 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons