Sennheiser IE 800 vs Sennheiser IE 900

Short answer: the Sennheiser IE 900. It ranks #605 of 865 in-ear headphones by sound quality (rated 3.1/5) at $1,299.95 and is still sold new; the Sennheiser IE 800 ranks #827 (rated 1.6/5) and is discontinued, so it is only an option used.

Why pick the Sennheiser IE 800: Bass is lifted about 2.8 dB with extension to 20 Hz, giving kick drums and bass lines extra weight. Watch for: Discontinued, so it is mainly found used.

The Sennheiser IE 900 is the better-sounding option. Oratory1990 measured sub-bass and bass within about 1.2 dB of target, so the low end is tidy and controlled. Watch for: Presence from 3 to 6 kHz is about 6.7 dB below the Harman target, with an 8.8 dB dip near 3.6 kHz, which recesses vocals and removes some bite.

Buy the Sennheiser IE 900. It is rated higher for sound quality and still sold new, while the Sennheiser IE 800 is discontinued.

Still deciding? The full Headphones rankings cover every ranked option.

Specifications Side By Side

Related Headphone Comparisons

More worthwhile head-to-heads for Sennheiser IE 900:

• Sennheiser IE 200 vs Sennheiser IE 900
• Sennheiser IE 600 vs Sennheiser IE 900
• qdc Anole V6 vs Sennheiser IE 900
• Sennheiser IE 900 vs FiiO FH5
• Sennheiser IE 900 vs Westone MACH 80

Prices on this page were last checked October 13, 2026 at 3:17 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

Sennheiser IE 800 Discontinued eBay

Pros: Bass is lifted about 2.8 dB with extension to 20 Hz, giving kick drums and bass lines extra weight. Lower mids sit within about 0.6 dB of target, keeping voices and guitars natural. It uses 1 x 7mm dynamic with an easy 16 ohm load.

Cons: Discontinued, so it is mainly found used. Presence sits about 8.4 dB low with a 10.8 dB dip near 3.5 kHz, so vocals and instruments lose some bite. A 6.7 dB peak near 10.8 kHz can make cymbals and sibilance sound sharp. A Harman score of 44 places it in the lower part of the in-ear rankings.

Full Sennheiser IE 800 review and specifications →

Released	2012 (14 years ago)
Connection	Wired
Deviation From Target	4.08 dB standard deviation
Driver Type	Dynamic
Drivers	1 x 7mm dynamic
Form Factor	In-ear
Frequency Response	5Hz - 46.5kHz
Harman Preference Score	44 (measured by oratory1990, via AutoEQ)
Impedance	16 ohms
Sensitivity	125 dB/Vrms
Sub-bass Extension	Within 6 dB of target down to 20 Hz (+0.6 dB at 30 Hz)
Tonal Tilt	-1.44 (negative is warmer, positive brighter)
Weight	0 lbs (8 g)

EQ preset to match the Harman target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-3.4 dB	0.70
Peak	3,961 Hz	+6.0 dB	1.84
Peak	180 Hz	-4.8 dB	0.63
Peak	2,501 Hz	+5.0 dB	2.58
Peak	71 Hz	+1.4 dB	0.98
High shelf	10,000 Hz	-9.4 dB	0.70
Peak	1,259 Hz	-1.2 dB	2.44
Peak	6,365 Hz	+3.3 dB	5.68
Peak	10,000 Hz	-1.4 dB	5.79
Peak	1,995 Hz	+0.8 dB	3.83

• Reviews, Comparisons and Sound Samples
  • AutoEQ results for the Sennheiser IE 800 (oratory1990 measurement)
• Head-to-Head Comparisons
  • Sennheiser IE 800 vs Sennheiser IE 300
  • Sennheiser IE 800 vs Sennheiser IE 4
  • Sennheiser IE 800 vs Sennheiser IE 600
  • Sennheiser IE 800 vs Sennheiser IE 200

Sennheiser IE 900: $1,299.95 Amazon $1,299.95 eBay

Same family: the Sennheiser IE 200 (lower-end model, ranked higher, rated 4.4/5) and the Sennheiser IE 600 (lower-end model, ranked higher, rated 3.5/5).

Pros: Oratory1990 measured sub-bass and bass within about 1.2 dB of target, so the low end is tidy and controlled. Sensitivity of 123 dB SPL/V and a 16 ohm impedance make it easy to drive from a phone, and the 7mm dynamic driver is rated to reach from 5 Hz to 48 kHz. Top-octave air sits about 3.6 dB above target for an open, detailed treble.

Cons: Presence from 3 to 6 kHz is about 6.7 dB below the Harman target, with an 8.8 dB dip near 3.6 kHz, which recesses vocals and removes some bite. A preference score of 63 is modest for such a premium product, and the HIFIMAN RE2000 has a higher rating at a lower price.

Full Sennheiser IE 900 review and specifications →

Released	2021 (5 years ago)
Back	Closed
Connection	Wired
Deviation From Target	2.82 dB standard deviation
Driver Type	Dynamic
Drivers	1 x 7mm dynamic
Form Factor	In-ear
Frequency Response	5Hz - 48kHz (Manufacturer specified)
Harman Preference Score	63 (measured by oratory1990, via AutoEQ)
Impedance	16 ohms
Sensitivity	123 dB SPL/V
Sub-bass Extension	Within 6 dB of target down to 20 Hz (+0.7 dB at 30 Hz)
Tonal Tilt	-0.92 (negative is warmer, positive brighter)

EQ preset to match the Harman target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-2.3 dB	0.70
Peak	4,081 Hz	+5.0 dB	2.86
Peak	204 Hz	-2.6 dB	1.13
Peak	1,472 Hz	-2.7 dB	2.33
Peak	2,956 Hz	+5.2 dB	2.42
High shelf	10,000 Hz	-4.4 dB	0.70
Peak	67 Hz	+0.6 dB	1.76
Peak	26 Hz	-0.9 dB	3.19
Peak	729 Hz	+0.4 dB	2.54
Peak	376 Hz	-0.4 dB	2.69

• Reviews, Comparisons and Sound Samples
  • AutoEQ results for the Sennheiser IE 900 (oratory1990 measurement)
• Head-to-Head Comparisons
  • Sennheiser IE 900 vs FiiO FH5
  • Sennheiser IE 900 vs qdc Anole V6
  • Sennheiser IE 900 vs Westone MACH 80
  • Sennheiser IE 900 vs Sennheiser IE 600
  • Sennheiser IE 900 vs Sennheiser IE 4
  • Sennheiser IE 900 vs Sennheiser IE 300
  • Sennheiser IE 900 vs Sennheiser IE 200