Short answer: the Revel F228Be, clearly. It is essentially flat on-axis with very nice directivity, while the F206 is only pretty even and adds a small peak around 4.5kHz alongside directivity error around 3kHz. The F228Be does ask more of an amplifier, dipping to 3.4 ohms with a secondary rise around 2kHz.

Buy the Revel F226Be, the replacement for the discontinued Revel F206; it is rated higher for sound quality than the Revel F228Be.
Looking for alternatives? See the complete Passive Home rankings.
Measured Differences
- Bass depth: the Revel F228Be reaches 25 Hz (10 dB down) against 34 Hz for the Revel F206, about half an octave deeper. You hear more of the lowest bass notes and kick drums.
- Efficiency: the Revel F228Be is rated at 89.3 dB sensitivity against 87 dB for the Revel F206, so it plays as loud with roughly two thirds of the amplifier power.
- Close enough not to matter: preference score with a subwoofer (7.5 vs 7.5).
Prices on this page were last checked November 14, 2026 at 6:17 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| Revel F228Be | Revel F206 | |
|---|---|---|
| Price | $11,000 per pair | $2,000 per pair used, Discontinued |
| Ranked | #29 of 228 in Large Size Floorstanding Speakers | #30 of 228 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 25Hz (measured, Audio Science Review) | 34Hz (measured, Audio Science Review) |
| Bass Extension (-3dB) | 61Hz (measured, Audio Science Review) | 60Hz (measured, Audio Science Review) |
| Dimensions | 50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm) | 40.3”H x 8.4”W x 12.2”D (1023.6 x 213.4 x 309.9 mm) |
| Impedance | 8 ohms | 4 ohms nominal (3.3 ohms minimum, measured by Audio Science Review) |
| Drivers | Dual 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofers, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter | Dual 6.5” (16.5 cm) Aluminum Cone, Cast-frame Woofers, 5.25” (13.3 cm) Aluminum Cone, Cast-frame Midrange, 1” (2.5 cm) Aluminum Tweeter with Acoustic Lens Waveguide |
| Sensitivity | 89.3dB (300Hz-3kHz @ 2.83V/1m, measured by Audio Science Review; 90dB manufacturer specified) | 87dB (measured, Audio Science Review) |
| Weight | 112.4 lbs (51 kg) each | 57.3 lbs (26 kg) each |
| Woofer Cabinet | ported, front | ported, front |
| Spinorama Preference Score | 6.01 | 5.51 |
| Spinorama Preference Score with Perfect Sub | 7.51 | 7.52 |
| DIY Kit | No | No |
Where the Ratings Come From
- Revel F228Be: Spinorama.org measurements and reviews by Audio Science Review.
- Revel F206: Spinorama.org measurements and reviews by Audio Science Review.
This comparison is generated from the ratings, specifications and measurements on each product’s own page, and it updates when that data changes. How we rank explains how each rating is decided.
Related Speaker Comparisons
More worthwhile head-to-heads for Revel F228Be: