Short answer: the SVS Prime Bookshelf, if you are buying new. The Revel Concerta2 M16 ranks higher than it (#51 vs #87 of 131 bookshelf speakers, 4.1/5 vs 3.5/5) but is discontinued, so only consider it used; the SVS Prime Bookshelf is still sold new at $699.
What the Revel Concerta2 M16 does well: CEA2034 spinorama shows an on-axis response that’s essentially flat from 200Hz to 10kHz, with some bass boost around 100Hz. The catch: Harmonic distortion shows a notable peak around 80Hz and a sharp spike around 350Hz, plus the woofer appears to get a bit unhappy right before handing off to the tweeter.
The case for the SVS Prime Bookshelf: Reasonable sensitivity for the price at about 87dB, and the 6.5” woofer sits in its own dedicated sealed sub-compartment inside the cabinet for cleaner midrange/bass separation. Watch for: A scooped mid-range paired with a boosted upper mid-range creates an audibly uneven tonal balance, and there’s an additional dip in the treble around 4-5kHz that reads as slightly tinny relative to the recessed mid-range.
Buy the SVS Prime Bookshelf if you want one new; the Revel Concerta2 M16 is discontinued, so only look for it used.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Revel Concerta2 M16 | SVS Prime Bookshelf | |
|---|---|---|
| Price | $600 per pair used (about), Discontinued | $699.00 per pair |
| Ranked | #51 of 131 in Large Size Bookshelf Speakers | #87 of 131 in Large Size Bookshelf Speakers |
| Drivers | 25mm tweeter + 165mm woofer | 6.5” polypropylene cone woofer with aluminum shorting ring (sealed sub-compartment), 1” aluminum dome tweeter |
| Weight | 32 lbs (14.5 kg) | 15.5 lbs (7.03 kg) each |
| Sensitivity | 86dB | 87dB (measured average, Erin’s Audio Corner) |
| Impedance | 6 ohms | 8 ohms nominal, 3.9 ohms minimum (measured, Erin’s Audio Corner) |
| Dimensions | 14.8”H x 8.6”W x 10.8”D (374.7 x 218.4 x 273.3 mm) | 13.2”H x 8”W x 10.2”D (335.3 x 203.2 x 259.1 mm) |
| Woofer Cabinet | ported, rear | - |
| Bass Extension (-3dB) | 60.1Hz (measured, Audio Science Review) | 72Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 41.6Hz (measured, Audio Science Review) | 49Hz (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.06 | 5.17 |
| Spinorama Preference Score with Perfect Sub | 7.28 | 7.78 |
| DIY Kit | No | No |
| Discontinued | Yes | - |
| Frequency Response | - | 48Hz - 25kHz ±3dB (manufacturer specified) |
Related Speaker Comparisons
More worthwhile head-to-heads for Revel Concerta2 M16:
- AsciLab C6B vs Revel Concerta2 M16
- Revel M106 vs Revel Concerta2 M16
- KEF R3 Meta vs Revel Concerta2 M16
- KEF Q Concerto Meta vs Revel Concerta2 M16
- Ascend Acoustics CMT-340 SE2 vs Revel Concerta2 M16
Prices on this page were last checked September 26, 2026 at 11:14 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Revel Concerta2 M16: $600 per pair used (about) Discontinued eBay
Pros: CEA2034 spinorama shows an on-axis response that’s essentially flat from 200Hz to 10kHz, with some bass boost around 100Hz. Predicted in-room response is very nice, with just extra bass and a bit of roll-off above 20kHz - the reviewer calls it “nice!” Distortion is well controlled through most of the range at both test levels. Measured bass extension of 60.1Hz (-3dB).
Cons: Harmonic distortion shows a notable peak around 80Hz and a sharp spike around 350Hz, plus the woofer appears to get a bit unhappy right before handing off to the tweeter. Cumulative spectral decay (waterfall) shows some lingering resonances in the 300Hz-1kHz region. The reviewer cautions not to over-cover the cabinet/grille area with thin fabric, as it can audibly affect the top-end response. Discontinued.
Full Revel Concerta2 M16 review and specifications →
| Bass Extension (-10dB) | 41.6Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 60.1Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 14.8”H x 8.6”W x 10.8”D (374.7 x 218.4 x 273.3 mm) |
| Discontinued | Yes |
| Drivers | 25mm tweeter + 165mm woofer |
| Impedance | 6 ohms |
| Sensitivity | 86dB |
| Spinorama Preference Score | 5.06 |
| Spinorama Preference Score with Perfect Sub | 7.28 |
| Weight | 32 lbs (14.5 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Revel Concerta2 M16 vs ELAC Uni-Fi Reference UBR62
- Revel Concerta2 M16 vs ELAC DBR62
- Revel Concerta2 M16 vs Yamaha NS-800A
- Revel Concerta2 M16 vs JBL HDI-1600
- Revel Concerta2 M16 vs Definitive Technology Demand D11
- Revel Concerta2 M16 vs Technics SB-C700
- Revel Concerta2 M16 vs ELAC Debut 3.0 DB63
- Revel Concerta2 M16 vs Dynaudio Contour 20i
- See all 26 comparisons
SVS Prime Bookshelf: $699.00 per pair Amazon eBay
Pros: Reasonable sensitivity for the price at about 87dB, and the 6.5” woofer sits in its own dedicated sealed sub-compartment inside the cabinet for cleaner midrange/bass separation. Overall response stays within about ±3dB from 80Hz-16kHz, which the reviewer calls reasonable for the price point. Wide, consistent horizontal radiation. Toeing the speakers 30 degrees off-axis smooths the in-room response noticeably if the on-axis tonal balance isn’t to your taste. Measured bass extension of 72Hz (-3dB), with a measured sensitivity of 87dB.
Cons: A scooped mid-range paired with a boosted upper mid-range creates an audibly uneven tonal balance, and there’s an additional dip in the treble around 4-5kHz that reads as slightly tinny relative to the recessed mid-range. Measured minimum impedance dips below 4 ohms (EPDR even lower), so an 8-ohm-only amplifier or AVR may struggle - a 4-ohm-stable amp or separate amplification is recommended. Bass extension is modest (F3 72Hz, F10 49Hz measured) - SVS clearly designed this to be paired with one of their subwoofers rather than to stand fully alone. Compared directly against its pricier sibling, the SVS Ultra Bookshelf, in the same review, the reviewer found the Ultra noticeably more tonally neutral.
Full SVS Prime Bookshelf review and specifications →
| Bass Extension (-10dB) | 49Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 72Hz (measured, Erin’s Audio Corner) |
| DIY Kit | No |
| Dimensions | 13.2”H x 8”W x 10.2”D (335.3 x 203.2 x 259.1 mm) |
| Drivers | 6.5” polypropylene cone woofer with aluminum shorting ring (sealed sub-compartment), 1” aluminum dome tweeter |
| Frequency Response | 48Hz - 25kHz ±3dB (manufacturer specified) |
| Impedance | 8 ohms nominal, 3.9 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 87dB (measured average, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.17 |
| Spinorama Preference Score with Perfect Sub | 7.78 |
| Weight | 15.5 lbs (7.03 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- SVS Prime Bookshelf vs ELAC Debut 2.0 B6.2
- SVS Prime Bookshelf vs KEF Q3 Meta
- SVS Prime Bookshelf vs Dynaudio Special Forty
- SVS Prime Bookshelf vs Polk Monitor XT20
- SVS Prime Bookshelf vs Infinity IL10
- SVS Prime Bookshelf vs Sonus Faber Lumina II
- SVS Prime Bookshelf vs GR-Research X-LS Encore
- SVS Prime Bookshelf vs XTZ Spirit 4
- See all 57 comparisons