RCF NX 932-A vs Martin Audio XP12

Last updated: September 16, 2026

Short answer: the RCF NX 932-A. It ranks #8 of 37 12-inch two-way powered pa speakers by sound quality; the Martin Audio XP12 ranks #30.

RCF NX 932-A vs Martin Audio XP12

What the RCF NX 932-A offers: A 3-inch titanium compression-driver diaphragm, 100° x 70° coverage and plywood cabinet make it especially capable for clear vocals over wide areas. The 2100W amplifier, advanced RCF processing and 132dB peak claim support serious main-speaker use. Watch for: The medium-quality Spinorama measurement is truncated and cannot generate a preference score, so its high position relies partly on response/directivity curves and published engineering. At 22.9kg it is significantly heavier than the ART 932-A.

What the Martin Audio XP12 offers: The vendor Spinorama data gives it a 4.92 ideal-subwoofer preference score and 56Hz bass extension. A three-channel mixer, channel EQ, 80° x 50° rotatable horn and 18kg plywood cabinet make it unusually versatile. Watch for: The Spinorama source has unknown quality, limiting confidence in the score. Its 128dB claimed peak output is modest for this category, and Bluetooth requires an optional control/streaming module rather than being standard.

Buy the RCF NX 932-A when sound quality outweighs the price for you, and the Martin Audio XP12 when the price outweighs sound quality instead.

If sound quality matters at all to you, skip the Martin Audio XP12. It ranks near the bottom of the 37 12-inch two-way powered pa speakers, so look higher up the list instead.

Want more options? Browse the full PA & Live Sound rankings.

Specifications Side By Side

RCF NX 932-A Martin Audio XP12
Price$1,799.00-
Ranked#8 of 37 in 12-Inch Two-Way Powered PA Speakers#30 of 37 in 12-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers12" woofer, 1.4" exit/3" diaphragm compression driver12" woofer, 1" compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)62Hz - 20kHz (±3dB, manufacturer specified); 50Hz (-10dB)
Dimensions24.4"H x 14.3"W x 15.9"D (620 x 362 x 405 mm)22.6"H x 14.1"W x 12.5"D (574 x 358 x 318 mm)
Bass Extension (-3dB)61.5Hz (measured, vendor Spinorama data)61.5Hz (measured, vendor Spinorama data)
Coverage100° x 70°80° x 50°, rotatable
Maximum SPL132dB peak (manufacturer specified)128dB peak (manufacturer specified)
InputsXLR/TRS combo input and XLR output2 x XLR/TRS combo plus mix output
Amplifier Power2100W peak (1400W LF + 700W HF)1,300W peak (1,000W LF + 300W HF, manufacturer specified)
Crossover Frequency700Hz2.3kHz active (24dB/octave)
Cabinet MaterialPlywoodMulti-angle birch/poplar plywood
Rigging6 x M10 inserts, 4 quick-lock points; 35mm pole mount17 M8 inserts; pole-mount socket
DSPYes, FiRPHASE and Bass Motion ControlYes, 3-channel mixer, channel EQ and voicing presets
BluetoothNoOptional control and audio module
Weight50.5 lbs (22.9 kg)39.7 lbs (18 kg)
Spinorama Preference Score-2.39
Spinorama Preference Score with Perfect Sub-4.92

How RCF NX 932-A compares with other leading options:

Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF NX 932-A: $1,799.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 932-A ranking card

Pros: A 3-inch titanium compression-driver diaphragm, 100° x 70° coverage and plywood cabinet make it especially capable for clear vocals over wide areas. The 2100W amplifier, advanced RCF processing and 132dB peak claim support serious main-speaker use. Measured bass extension of 61.5Hz (-3dB).

Cons: The medium-quality Spinorama measurement is truncated and cannot generate a preference score, so its high position relies partly on response/directivity curves and published engineering. At 22.9kg it is significantly heavier than the ART 932-A.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)61.5Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 70°
Crossover Frequency700Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions24.4"H x 14.3"W x 15.9"D (620 x 362 x 405 mm)
Drivers12" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL132dB peak (manufacturer specified)
Rigging6 x M10 inserts, 4 quick-lock points; 35mm pole mount
Weight50.5 lbs (22.9 kg)

Martin Audio XP12 eBay

Martin Audio XP12 ranking card

Pros: The vendor Spinorama data gives it a 4.92 ideal-subwoofer preference score and 56Hz bass extension. A three-channel mixer, channel EQ, 80° x 50° rotatable horn and 18kg plywood cabinet make it unusually versatile. Measured bass extension of 61.5Hz (-3dB).

Cons: The Spinorama source has unknown quality, limiting confidence in the score. Its 128dB claimed peak output is modest for this category, and Bluetooth requires an optional control/streaming module rather than being standard.

Amplifier Power1,300W peak (1,000W LF + 300W HF, manufacturer specified)
Bass Extension (-3dB)61.5Hz (measured, vendor Spinorama data)
BluetoothOptional control and audio module
Cabinet MaterialMulti-angle birch/poplar plywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage80° x 50°, rotatable
Crossover Frequency2.3kHz active (24dB/octave)
DSPYes, 3-channel mixer, channel EQ and voicing presets
Dimensions22.6"H x 14.1"W x 12.5"D (574 x 358 x 318 mm)
Drivers12" woofer, 1" compression driver
Frequency Response62Hz - 20kHz (±3dB, manufacturer specified); 50Hz (-10dB)
Inputs2 x XLR/TRS combo plus mix output
Maximum SPL128dB peak (manufacturer specified)
Rigging17 M8 inserts; pole-mount socket
Spinorama Preference Score2.39
Spinorama Preference Score with Perfect Sub4.92
Weight39.7 lbs (18 kg)