Short answer: choose between the RCF NX 910-A and Yamaha DZR10 for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the RCF NX 910-A. The plywood enclosure and FiRPHASE/Bass Motion Control processing make it a sturdier systems alternative to the ART 710-A MK5, with a wide 100° x 60° pattern and 130dB claimed peak.
The case for the Yamaha DZR10. The bi-amped 2-inch titanium compression driver and 137dB claimed peak, the highest maximum-output claim in this ranking, give it genuine main-speaker capability in a 10-inch cabinet with sophisticated onboard DSP.
Important trade-offs. The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. At 16.4kg it is heavier than the ART-series alternative.
Buy the RCF NX 910-A when its stated format, coverage, and system features fit the job better.
Buy the Yamaha DZR10 when its stated output, control, and deployment strengths better match the system.
The Yamaha DZR10 is not a sound-quality pick. It sits near the bottom of the 19 10-inch two-way powered pa speakers; there are better options higher up.
Specifications Side By Side
| RCF NX 910-A | Yamaha DZR10 | |
|---|---|---|
| Price | $1,349.00 | $1,113.49 |
| Ranked | #13 of 19 in 10-Inch Two-Way Powered PA Speakers | #15 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bi-amped bass-reflex PA speaker |
| Drivers | 10" woofer, compression driver | 10" woofer, 2" compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 44Hz - 20kHz (-10dB, manufacturer specified) |
| Dimensions | 20.1"H x 11.6"W x 13.1"D (510 x 294.2 x 332.3 mm) | 21.1"H x 12.4"W x 13.6"D (537 x 315 x 345 mm) |
| Coverage | 100° x 60° | 90° x 60°, rotatable |
| Maximum SPL | 130dB peak (manufacturer specified) | 137dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR output | 2 x XLR/TRS combo; 2 x XLR output |
| Amplifier Power | 2100W peak (1400W LF + 700W HF) | 2000W dynamic / 1100W burst / 950W continuous |
| Crossover Frequency | 1600Hz | 1800Hz (FIR-X) |
| Cabinet Material | Polyurea-coated plywood | Plywood with polyurea coating |
| Rigging | 5 x M10 inserts | 8 x M10 and 2 x M8 points; dual 35mm pole mounts |
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) | 60Hz (measured, vendor Spinorama data) |
| DSP | Yes, FiRPHASE and Bass Motion Control | Yes, FIR-X tuning and Drive Motion Calibration |
| Bluetooth | No | No |
| Weight | 36.2 lbs / 16.4 kg | 39.5 lbs / 17.9 kg |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- KV2 Audio EX10 vs RCF ART 710-A MK5
- Vue Audiotechnik A-10 vs RCF ART 710-A MK5
- RCF HD 10-A MK5 vs Martin Audio CDD10
- Yamaha DZR10 vs Martin Audio CDD10
- RCF ART 710-A MK5 vs RCF NX 910-A
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF NX 910-A: $1,349.00 Amazon B&H Photo Video Guitar Center eBay
Pros: The plywood enclosure and FiRPHASE/Bass Motion Control processing make it a sturdier systems alternative to the ART 710-A MK5, with a wide 100° x 60° pattern and 130dB claimed peak.
Cons: The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. At 16.4kg it is heavier than the ART-series alternative.
Full RCF NX 910-A review and specifications →
| Amplifier Power | 2100W peak (1400W LF + 700W HF) |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polyurea-coated plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 1600Hz |
| DSP | Yes, FiRPHASE and Bass Motion Control |
| Dimensions | 20.1"H x 11.6"W x 13.1"D (510 x 294.2 x 332.3 mm) |
| Drivers | 10" woofer, compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR output |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | 5 x M10 inserts |
| Weight | 36.2 lbs / 16.4 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Yamaha DZR10: $1,113.49 Amazon B&H Photo Video Guitar Center eBay
Pros: The bi-amped 2-inch titanium compression driver and 137dB claimed peak, the highest maximum-output claim in this ranking, give it genuine main-speaker capability in a 10-inch cabinet with sophisticated onboard DSP.
Cons: Medium-quality vendor data shows a 3.9 ideal-subwoofer preference score, one of the more modest results here relative to its price, and it lacks Bluetooth audio or app control.
Full Yamaha DZR10 review and specifications →
| Amplifier Power | 2000W dynamic / 1100W burst / 950W continuous |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Plywood with polyurea coating |
| Configuration | Active 2-way bi-amped bass-reflex PA speaker |
| Coverage | 90° x 60°, rotatable |
| Crossover Frequency | 1800Hz (FIR-X) |
| DSP | Yes, FIR-X tuning and Drive Motion Calibration |
| Dimensions | 21.1"H x 12.4"W x 13.6"D (537 x 315 x 345 mm) |
| Drivers | 10" woofer, 2" compression driver |
| Frequency Response | 44Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | 2 x XLR/TRS combo; 2 x XLR output |
| Maximum SPL | 137dB peak (manufacturer specified) |
| Rigging | 8 x M10 and 2 x M8 points; dual 35mm pole mounts |
| Weight | 39.5 lbs / 17.9 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons