RCF ART 935-A vs Yamaha DXR15mkIII

Last updated: September 7, 2026

Short answer: choose between the RCF ART 935-A and Yamaha DXR15mkIII for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.

The case for the RCF ART 935-A. The bigger-voice-coil compression driver, 133dB claimed peak and broad 100° x 60° coverage mirror the well-regarded ART 932-A’s design in a 15-inch cabinet. At 24.2kg it stays manageable for a box this size.

The case for the Yamaha DXR15mkIII. The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

Important trade-offs. The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering and its 12-inch sibling’s reputation rather than a confirmed result. The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming.

Buy the RCF ART 935-A when its stated format, coverage, and system features fit the job better.

Buy the Yamaha DXR15mkIII when its stated output, control, and deployment strengths better match the system.

RCF ART 935-A vs Yamaha DXR15mkIII

Specifications Side By Side

RCF ART 935-A Yamaha DXR15mkIII
Price$1,499.00$1,099.99
Ranked#10 of 29 in 15-Inch Two-Way Powered PA Speakers#12 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, 1.4" exit/3" diaphragm compression driver15" woofer, 1" throat/1.75" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)46Hz - 20kHz (-10dB, manufacturer specified)
Dimensions28.2"H x 16.3"W x 16.1"D (717 x 415 x 410 mm)27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)
Coverage100° x 60°90° x 60°
Maximum SPL133dB peak (manufacturer specified)134dB peak (manufacturer specified)
InputsXLR and 1/4-inch jack input; XLR output2 x XLR/TRS combo; XLR thru and DSP outputs
Amplifier Power2100W peak (1400W LF + 700W HF)2000W peak / 1000W RMS (1700W LF + 300W HF peak)
Crossover Frequency800Hz1800Hz (FIR-X)
Cabinet MaterialPP compositePP plastic
RiggingM10 inserts; 35mm pole mount3 x M10 points plus U-bracket points; 35mm dual-angle pole mount
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)54.5Hz (measured, vendor Spinorama data)
DSPYes, FiRPHASE and Bass Motion ControlYes, FIR-X tuning, Drive Motion Calibration and D-Remote
BluetoothNoBluetooth 5.0 audio streaming and D-Remote control
Weight54.2 lbs / 24.6 kg46.3 lbs / 21 kg

Other pairings from the same speaker class worth checking:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF ART 935-A: $1,499.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 935-A ranking card

Pros: The bigger-voice-coil compression driver, 133dB claimed peak and broad 100° x 60° coverage mirror the well-regarded ART 932-A’s design in a 15-inch cabinet. At 24.2kg it stays manageable for a box this size.

Cons: The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering and its 12-inch sibling’s reputation rather than a confirmed result.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency800Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions28.2"H x 16.3"W x 16.1"D (717 x 415 x 410 mm)
Drivers15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR and 1/4-inch jack input; XLR output
Maximum SPL133dB peak (manufacturer specified)
RiggingM10 inserts; 35mm pole mount
Weight54.2 lbs / 24.6 kg

Yamaha DXR15mkIII: $1,099.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DXR15mkIII ranking card

Pros: The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.

Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming.

Amplifier Power2000W peak / 1000W RMS (1700W LF + 300W HF peak)
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)
BluetoothBluetooth 5.0 audio streaming and D-Remote control
Cabinet MaterialPP plastic
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency1800Hz (FIR-X)
DSPYes, FIR-X tuning, Drive Motion Calibration and D-Remote
Dimensions27.5"H x 17.6"W x 15"D (699 x 447 x 380 mm)
Drivers15" woofer, 1" throat/1.75" diaphragm compression driver
Frequency Response46Hz - 20kHz (-10dB, manufacturer specified)
Inputs2 x XLR/TRS combo; XLR thru and DSP outputs
Maximum SPL134dB peak (manufacturer specified)
Rigging3 x M10 points plus U-bracket points; 35mm dual-angle pole mount
Weight46.3 lbs / 21 kg