RCF ART 932-A vs Martin Audio XP12

Last updated: September 16, 2026

Short answer: the RCF ART 932-A. It ranks #7 of 37 12-inch two-way powered pa speakers by sound quality; the Martin Audio XP12 ranks #30.

RCF ART 932-A vs Martin Audio XP12

What the RCF ART 932-A offers: A large 3-inch compression-driver voice coil, broad 100° x 60° coverage and 132dB claimed maximum output make it attractive for clear vocals and live mains. RCF’s FiRPHASE and Bass Motion Control processing target phase consistency and useful low-frequency headroom. Watch for: The local low-quality vendor data does not currently produce a preference score, so this position has lower measurement confidence than the QSC, JBL and scored FBT models. Its streamlined controls lack the app and deep user DSP of the JBL PRX912.

What the Martin Audio XP12 offers: The vendor Spinorama data gives it a 4.92 ideal-subwoofer preference score and 56Hz bass extension. A three-channel mixer, channel EQ, 80° x 50° rotatable horn and 18kg plywood cabinet make it unusually versatile. Watch for: The Spinorama source has unknown quality, limiting confidence in the score. Its 128dB claimed peak output is modest for this category, and Bluetooth requires an optional control/streaming module rather than being standard.

Buy the RCF ART 932-A if sound quality matters more than the price. Buy the Martin Audio XP12 if the price matters more than sound quality.

The Martin Audio XP12 is not a sound-quality pick. It sits near the bottom of the 37 12-inch two-way powered pa speakers; there are better options higher up.

Looking for alternatives? See the complete PA & Live Sound rankings.

Specifications Side By Side

RCF ART 932-A Martin Audio XP12
Price$1,299.00-
Ranked#7 of 37 in 12-Inch Two-Way Powered PA Speakers#30 of 37 in 12-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers12" woofer, 1.4" compression driver with 3" voice coil12" woofer, 1" compression driver
Frequency Response50Hz - 20kHz (manufacturer specified)62Hz - 20kHz (±3dB, manufacturer specified); 50Hz (-10dB)
Dimensions25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm)22.6"H x 14.1"W x 12.5"D (574 x 358 x 318 mm)
Coverage100° x 60°80° x 50°, rotatable
Maximum SPL132dB peak (manufacturer specified)128dB peak (manufacturer specified)
InputsXLR/TRS combo2 x XLR/TRS combo plus mix output
Amplifier Power2100W peak (1500W LF + 600W HF)1,300W peak (1,000W LF + 300W HF, manufacturer specified)
Crossover Frequency700Hz2.3kHz active (24dB/octave)
Cabinet MaterialPP compositeMulti-angle birch/poplar plywood
RiggingM10 inserts; 35mm pole mount17 M8 inserts; pole-mount socket
DSPYesYes, 3-channel mixer, channel EQ and voicing presets
BluetoothNoOptional control and audio module
Weight41.4 lbs (18.8 kg)39.7 lbs (18 kg)
Bass Extension (-3dB)-61.5Hz (measured, vendor Spinorama data)
Spinorama Preference Score-2.39
Spinorama Preference Score with Perfect Sub-4.92

How RCF ART 932-A compares with other leading options:

Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF ART 932-A: $1,299.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 932-A ranking card

Pros: A large 3-inch compression-driver voice coil, broad 100° x 60° coverage and 132dB claimed maximum output make it attractive for clear vocals and live mains. RCF’s FiRPHASE and Bass Motion Control processing target phase consistency and useful low-frequency headroom.

Cons: The local low-quality vendor data does not currently produce a preference score, so this position has lower measurement confidence than the QSC, JBL and scored FBT models. Its streamlined controls lack the app and deep user DSP of the JBL PRX912.

Amplifier Power2100W peak (1500W LF + 600W HF)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency700Hz
DSPYes
Dimensions25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm)
Drivers12" woofer, 1.4" compression driver with 3" voice coil
Frequency Response50Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo
Maximum SPL132dB peak (manufacturer specified)
RiggingM10 inserts; 35mm pole mount
Weight41.4 lbs (18.8 kg)

Martin Audio XP12 eBay

Martin Audio XP12 ranking card

Pros: The vendor Spinorama data gives it a 4.92 ideal-subwoofer preference score and 56Hz bass extension. A three-channel mixer, channel EQ, 80° x 50° rotatable horn and 18kg plywood cabinet make it unusually versatile. Measured bass extension of 61.5Hz (-3dB).

Cons: The Spinorama source has unknown quality, limiting confidence in the score. Its 128dB claimed peak output is modest for this category, and Bluetooth requires an optional control/streaming module rather than being standard.

Amplifier Power1,300W peak (1,000W LF + 300W HF, manufacturer specified)
Bass Extension (-3dB)61.5Hz (measured, vendor Spinorama data)
BluetoothOptional control and audio module
Cabinet MaterialMulti-angle birch/poplar plywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage80° x 50°, rotatable
Crossover Frequency2.3kHz active (24dB/octave)
DSPYes, 3-channel mixer, channel EQ and voicing presets
Dimensions22.6"H x 14.1"W x 12.5"D (574 x 358 x 318 mm)
Drivers12" woofer, 1" compression driver
Frequency Response62Hz - 20kHz (±3dB, manufacturer specified); 50Hz (-10dB)
Inputs2 x XLR/TRS combo plus mix output
Maximum SPL128dB peak (manufacturer specified)
Rigging17 M8 inserts; pole-mount socket
Spinorama Preference Score2.39
Spinorama Preference Score with Perfect Sub4.92
Weight39.7 lbs (18 kg)