Short answer: these RCF ART 912-A and RCF NX 912-A alternatives share a brand and size class, but their coverage, driver architecture, cabinet format, processing, and output priorities can make them fit very different jobs.
Why choose the RCF ART 912-A. A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
Why choose the RCF NX 912-A. The plywood enclosure, 2100W amplification, FiRPHASE/Bass Motion Control and flexible rigging make it a sturdier systems alternative to the ART 912-A. Medium-quality data indicates extension to roughly 58Hz with broad 100° x 60° coverage.
What to weigh before buying. The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio. The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. Its 130dB peak claim matches the cheaper ART 912-A rather than exceeding it.
Buy the RCF ART 912-A when its stated coverage, output, processing, and deployment format best match the job.
Buy the RCF NX 912-A when its stated strengths are the better match for the room and the rest of the PA.
Specifications Side By Side
| RCF ART 912-A | RCF NX 912-A | |
|---|---|---|
| Price | $949.00 | $1,449.00 |
| Ranked | #9 of 37 in 12-Inch Two-Way Powered PA Speakers | #23 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 12" woofer, 1" compression driver with 1.75" voice coil | 12" woofer, 1.75" compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 50Hz - 20kHz (manufacturer specified) |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) | 24.4"H x 14.2"W x 15.9"D (620 x 361.4 x 404.5 mm) |
| Amplifier Power | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) | 2100W peak (1400W LF + 700W HF) |
| Crossover Frequency | 1.7kHz (manufacturer specified) | 1600Hz |
| Cabinet Material | Polypropylene composite | Polyurea-coated plywood |
| Rigging | M10 fly points; pole mount | 6 x M10 inserts |
| Coverage | 100° x 60° | 100° x 60° |
| Maximum SPL | 130dB peak (manufacturer specified) | 130dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo | XLR/TRS combo input and XLR output |
| DSP | Yes | Yes, FiRPHASE and Bass Motion Control |
| Bluetooth | No | No |
| Weight | 41.9 lbs / 19 kg | 45.9 lbs / 20.8 kg |
| Bass Extension (-3dB) | - | 58Hz (measured, vendor Spinorama data) |
Related Speaker Comparisons
Other pairings from the same speaker class worth checking:
- RCF ART 932-A vs Yamaha DXR12mkIII
- RCF NX 932-A vs Yamaha DBR12
- RCF NX 932-A vs RCF ART 712-A MK4
- Yamaha DXR12mkII vs RCF NX 912-A
- JBL PRX912 vs RCF NX 912-A
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF ART 912-A: $949.00 Amazon B&H Photo Video Guitar Center eBay
Pros: A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
Cons: The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio.
Full RCF ART 912-A review and specifications →
| Amplifier Power | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) |
|---|---|
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 1.7kHz (manufacturer specified) |
| DSP | Yes |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) |
| Drivers | 12" woofer, 1" compression driver with 1.75" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | M10 fly points; pole mount |
| Weight | 41.9 lbs / 19 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
RCF NX 912-A: $1,449.00 Amazon B&H Photo Video Guitar Center eBay
Pros: The plywood enclosure, 2100W amplification, FiRPHASE/Bass Motion Control and flexible rigging make it a sturdier systems alternative to the ART 912-A. Medium-quality data indicates extension to roughly 58Hz with broad 100° x 60° coverage.
Cons: The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. Its 130dB peak claim matches the cheaper ART 912-A rather than exceeding it.
Full RCF NX 912-A review and specifications →
| Amplifier Power | 2100W peak (1400W LF + 700W HF) |
|---|---|
| Bass Extension (-3dB) | 58Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Polyurea-coated plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 1600Hz |
| DSP | Yes, FiRPHASE and Bass Motion Control |
| Dimensions | 24.4"H x 14.2"W x 15.9"D (620 x 361.4 x 404.5 mm) |
| Drivers | 12" woofer, 1.75" compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo input and XLR output |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | 6 x M10 inserts |
| Weight | 45.9 lbs / 20.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons