Short answer: choose between the RCF ART 912-A and HK Audio LINEAR 9 112 XA for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the RCF ART 912-A. A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
The case for the HK Audio LINEAR 9 112 XA. The high-quality vendor data returns a 4.90 ideal-subwoofer preference score. MILAN networking, comprehensive remote DSP and a durable plywood cabinet make it a strong systems-oriented choice for professional deployment.
Important trade-offs. The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio. Its 82Hz measured bass extension and 131dB peak claim mean it depends more on a subwoofer than the strongest stand-alone boxes. Buyers who do not need networked audio may find better value in simpler mainstream models.
Buy the RCF ART 912-A when its stated format, coverage, and system features fit the job better.
Buy the HK Audio LINEAR 9 112 XA when its stated output, control, and deployment strengths better match the system.
Specifications Side By Side
| RCF ART 912-A | HK Audio LINEAR 9 112 XA | |
|---|---|---|
| Price | $949.00 | $1,877.32 |
| Ranked | #9 of 37 in 12-Inch Two-Way Powered PA Speakers | #12 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker/monitor |
| Drivers | 12" woofer, 1" compression driver with 1.75" voice coil | 12" woofer, 1" compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) | 62Hz - 20kHz (-10dB, manufacturer specified) |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) | 26.4"H x 14.6"W x 12.2"D (670 x 370 x 310 mm) |
| Amplifier Power | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) | 700W RMS |
| Crossover Frequency | 1.7kHz (manufacturer specified) | 1600Hz |
| Cabinet Material | Polypropylene composite | Birch plywood with PU coating |
| Rigging | M10 fly points; pole mount | 5 x M8 points; DuoTilt 3°/7° pole mount |
| Coverage | 100° x 60° | 70° x 50°, rotatable |
| Maximum SPL | 130dB peak (manufacturer specified) | 131dB peak (manufacturer specified) |
| Inputs | XLR/TRS combo | XLR/TRS combo, XLR thru/DSP out, dual EtherCON |
| DSP | Yes | Yes, networked PEQ, filters, delay and limiter |
| Bluetooth | No | No |
| Weight | 41.9 lbs / 19 kg | 45.2 lbs / 20.5 kg |
| Bass Extension (-3dB) | - | 90Hz (measured, vendor Spinorama data) |
| Network Control | - | Milan and HK Audio DSP Control |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- HK Audio LINEAR 7 112 XA vs Yamaha DXR12mkII
- Yamaha DXR12mkII vs Axiom ED120A
- RCF NX 932-A vs Yamaha DXR12mkIII
- HK Audio LINEAR 9 112 XA vs Yamaha DXR12mkII
- RCF NX 932-A vs RCF ART 912-A
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF ART 912-A: $949.00 Amazon B&H Photo Video Guitar Center eBay
Pros: A current, widely stocked 12-inch RCF with 130dB claimed output, 100° x 60° coverage and the same FiRPHASE/Bass Motion Control platform used higher in the ART 9 line. It is a straightforward choice for users who value simple setup over menu-heavy DSP.
Cons: The available low-quality manufacturer directivity data has no computed preference score, limiting confidence in cross-brand tonal comparisons. It has only basic rear-panel presets and no wireless control or Bluetooth audio.
Full RCF ART 912-A review and specifications →
| Amplifier Power | 2,100W peak (1,400W LF + 700W HF, manufacturer specified) |
|---|---|
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 100° x 60° |
| Crossover Frequency | 1.7kHz (manufacturer specified) |
| DSP | Yes |
| Dimensions | 25.3"H x 14.6"W x 14.3"D (642 x 370 x 363 mm) |
| Drivers | 12" woofer, 1" compression driver with 1.75" voice coil |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR/TRS combo |
| Maximum SPL | 130dB peak (manufacturer specified) |
| Rigging | M10 fly points; pole mount |
| Weight | 41.9 lbs / 19 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
HK Audio LINEAR 9 112 XA: $1,877.32 Amazon eBay
Pros: The high-quality vendor data returns a 4.90 ideal-subwoofer preference score. MILAN networking, comprehensive remote DSP and a durable plywood cabinet make it a strong systems-oriented choice for professional deployment.
Cons: Its 82Hz measured bass extension and 131dB peak claim mean it depends more on a subwoofer than the strongest stand-alone boxes. Buyers who do not need networked audio may find better value in simpler mainstream models.
Full HK Audio LINEAR 9 112 XA review and specifications →
| Amplifier Power | 700W RMS |
|---|---|
| Bass Extension (-3dB) | 90Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Birch plywood with PU coating |
| Configuration | Active 2-way bass-reflex PA speaker/monitor |
| Coverage | 70° x 50°, rotatable |
| Crossover Frequency | 1600Hz |
| DSP | Yes, networked PEQ, filters, delay and limiter |
| Dimensions | 26.4"H x 14.6"W x 12.2"D (670 x 370 x 310 mm) |
| Drivers | 12" woofer, 1" compression driver |
| Frequency Response | 62Hz - 20kHz (-10dB, manufacturer specified) |
| Inputs | XLR/TRS combo, XLR thru/DSP out, dual EtherCON |
| Maximum SPL | 131dB peak (manufacturer specified) |
| Network Control | Milan and HK Audio DSP Control |
| Rigging | 5 x M8 points; DuoTilt 3°/7° pole mount |
| Weight | 45.2 lbs / 20.5 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons