Short answer: the Yamaha DXR15mkIII has been measured and ranked among 15-inch pa speakers; the RCF ART 735-A MK5 has not been independently measured yet, so until it is, this comes down to features and price.
What the RCF ART 735-A MK5 offers: A 15” woofer and a 1.4” exit titanium compression driver with a 3” voice coil, powered by 1,400W peak (1,000W LF, 400W HF) with DSP crossover at 800Hz.
What the Yamaha DXR15mkIII brings: The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII.
On paper: The RCF ART 735-A MK5 is rated down to 45Hz against 46Hz, though makers quote these at different tolerances.
Price: the RCF ART 735-A MK5 lists at $999 and the Yamaha DXR15mkIII at $1,099.99.
Buy the Yamaha DXR15mkIII if you want a speaker whose sound quality has been measured and ranked. It also has Bluetooth.
Buy the RCF ART 735-A MK5 if you want deeper rated bass and a microphone input, and you can wait for measurements to confirm how it sounds.
Still deciding? The full PA & Live Sound rankings cover every ranked option.
Specifications Side By Side
| RCF ART 735-A MK5 | Yamaha DXR15mkIII | |
|---|---|---|
| Price | $999.00 | $1,099.99 |
| Ranked | - | #15 of 38 in 15-Inch PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 15” woofer, 1.4” compression driver with 3” titanium voice coil | 15” woofer, 1” throat/1.75” diaphragm compression driver |
| Frequency Response | 45Hz - 20kHz (manufacturer specified) | 46Hz - 20kHz (-10dB, manufacturer specified) |
| Amplifier Power | 1,400W peak (1,000W LF + 400W HF, manufacturer specified) | 2000W peak / 1000W RMS (1700W LF + 300W HF peak) |
| Crossover Frequency | 800Hz (manufacturer specified) | 1800Hz (FIR-X) |
| Maximum SPL | 132dB peak (manufacturer specified) | 134dB peak (manufacturer specified) |
| Coverage | 90° x 60° | 90° x 60° |
| DSP | Yes, FiRPHASE, XBOOST, limiting and protection | Yes, FIR-X tuning, Drive Motion Calibration and D-Remote |
| Cabinet Material | Polypropylene composite | PP plastic |
| Rigging | Pole mount | 3 x M10 points plus U-bracket points; 35mm dual-angle pole mount |
| Dimensions | 708H x 437W x 389D mm | 27.5”H x 17.6”W x 15”D (699 x 447 x 380 mm) |
| Weight | 21.4 kg | 46.3 lbs (21 kg) |
| XLR Input | Yes | Yes |
| TRS Input | Yes | Yes |
| Microphone Input | Yes | No |
| Bluetooth | No | Yes, 5.0 (audio streaming and D-Remote control) |
| Inputs | - | 2 x XLR/TRS combo; XLR thru and DSP outputs |
| Bass Extension (-3dB) | - | 54.5Hz (measured, vendor Spinorama data) |
| RCA Input | - | No |
| Optical Input | - | No |
| Coaxial Input | - | No |
| USB Input | - | No |
| HDMI Input | - | No |
| AES Input | - | No |
| Aux Input | - | No |
| Guitar Input | - | No |
Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
RCF ART 735-A MK5: $999.00 Amazon B&H Photo Video eBay
Older model: the RCF ART 735-A MK4 (rated 3.2/5).
Pros: A 15” woofer and a 1.4” exit titanium compression driver with a 3” voice coil, powered by 1,400W peak (1,000W LF, 400W HF) with DSP crossover at 800Hz. RCF rates it at 45Hz to 20kHz and 132dB maximum output over 90° x 60° coverage. FiRPHASE phase alignment and XBOOST bass modes can be set from the rear panel or the LiveRemote app, and the mic/line input feeds an XLR link output.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. At 21.4 kg it is heavy for one person to lift onto a pole, and it needs a subwoofer for deep bass at event levels.
Full RCF ART 735-A MK5 review and specifications →
| Amplifier Power | 1,400W peak (1,000W LF + 400W HF, manufacturer specified) |
|---|---|
| Bluetooth | No |
| Cabinet Material | Polypropylene composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 800Hz (manufacturer specified) |
| DSP | Yes, FiRPHASE, XBOOST, limiting and protection |
| Dimensions | 708H x 437W x 389D mm |
| Drivers | 15” woofer, 1.4” compression driver with 3” titanium voice coil |
| Frequency Response | 45Hz - 20kHz (manufacturer specified) |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Microphone Input | Yes |
| Rigging | Pole mount |
| TRS Input | Yes |
| Weight | 21.4 kg |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- These figures are manufacturer-specified rather than independently measured.
- Head-to-Head Comparisons
Yamaha DXR15mkIII: $1,099.99 Amazon B&H Photo Video Guitar Center eBay
Pros: The third-generation DXR15 raises claimed output to 134dB with 2000W amplification, app-based control and Yamaha’s newest onboard DSP, while its 90° x 60° pattern matches the well-regarded DXR12mkIII. Measured bass extension of 54.5Hz (-3dB).
Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR15mkII is unconfirmed. Wireless connectivity is for remote control, not audio streaming.
Full Yamaha DXR15mkIII review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 2000W peak / 1000W RMS (1700W LF + 300W HF peak) |
| Aux Input | No |
| Bass Extension (-3dB) | 54.5Hz (measured, vendor Spinorama data) |
| Bluetooth | Yes, 5.0 (audio streaming and D-Remote control) |
| Cabinet Material | PP plastic |
| Coaxial Input | No |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 1800Hz (FIR-X) |
| DSP | Yes, FIR-X tuning, Drive Motion Calibration and D-Remote |
| Dimensions | 27.5”H x 17.6”W x 15”D (699 x 447 x 380 mm) |
| Drivers | 15” woofer, 1” throat/1.75” diaphragm compression driver |
| Frequency Response | 46Hz - 20kHz (-10dB, manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Inputs | 2 x XLR/TRS combo; XLR thru and DSP outputs |
| Maximum SPL | 134dB peak (manufacturer specified) |
| Microphone Input | No |
| Optical Input | No |
| RCA Input | No |
| Rigging | 3 x M10 points plus U-bracket points; 35mm dual-angle pole mount |
| TRS Input | Yes |
| USB Input | No |
| Weight | 46.3 lbs (21 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Yamaha DXR15mkIII vs Coda Audio G715
- Yamaha DXR15mkIII vs Axiom ED150A
- Yamaha DXR15mkIII vs FBT Mitus 115A
- Yamaha DXR15mkIII vs RCF ART 935-A
- Yamaha DXR15mkIII vs Yamaha DXR15mkII
- Yamaha DXR15mkIII vs JBL PRX915
- Yamaha DXR15mkIII vs RCF ART 715-A MK5
- Yamaha DXR15mkIII vs Yamaha DZR15
- See all 21 comparisons