Short answer: the Myer Audio CKLVX D62. It ranks #74 of 450 in-ear headphones by sound quality, rated 4.5/5, at $399; the Unique Melody 3DT ranks #106, rated 4.4/5, at $399. With prices this close, go by the sound-quality ranking rather than the cost.
Why pick the Myer Audio CKLVX D62: Nine hobbyist measurements on squig.link score it 79.6 for preference with a near neutral tilt and 1.59 dB of deviation. The catch: Presence sits about 2.8 dB low with a 5.5 dB dip near 5.4 kHz, while a 4.8 dB peak follows at 8.1 kHz, so the treble swings between recessed vocals and occasional sibilant edge.
Why pick the Unique Melody 3DT: Four hobbyist measurements on squig.link give the 3DT a preference score of 79.0, with its three dynamic drivers producing a balanced response where every band from 60 Hz to 10 kHz sits within 1.6 dB of target. The catch: A 7 dB peak near 8 kHz adds an edge to cymbals and sibilance that some listeners will find fatiguing.
Buy the Myer Audio CKLVX D62. It is rated higher for sound quality than the Unique Melody 3DT at the same price, so it is the default pick unless a specific strength of the other one matters more to you.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| Myer Audio CKLVX D62 | Unique Melody 3DT | |
|---|---|---|
| Price | $399.00 | $399.00 |
| Ranked | #74 of 450 in In-Ear Headphones | #106 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 80 (median of 9 squig.link measurements, calibrated to AutoEQ) | 79 (median of 4 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.59 dB standard deviation | 1.60 dB standard deviation |
| Tonal Tilt | -0.06 (negative is warmer, positive brighter) | +0.18 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-1.4 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Hybrid (2 dynamic + 6 balanced armature) | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 8mm dynamic + 6 x balanced armature | 2 x 7mm dynamic + 1 x 10mm dynamic |
| Impedance | - | 25.4 ohms |
| Sensitivity | - | 113 dB |
| Frequency Response | - | 20Hz - 20kHz (Manufacturer specified) |
Related Headphone Comparisons
More top alternatives to Myer Audio CKLVX D62:
- Myer Audio CKLVX D62 vs Moondrop Blessing
- Myer Audio CKLVX D62 vs ThieAudio Hype 2
- Unique Melody 3DT vs ThieAudio Hype 2
- Moondrop Blessing vs Unique Melody 3DT
- Moondrop Blessing 3 vs Unique Melody 3DT
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Myer Audio CKLVX D62: $399.00 Amazon eBay
Pros: Nine hobbyist measurements on squig.link score it 79.6 for preference with a near neutral tilt and 1.59 dB of deviation. Two dynamic drivers and six balanced armatures keep bass and midrange within about 1 dB of target, and air above 10 kHz runs about 5.1 dB hot for an airy, detailed presentation. It matches the Kiwi Ears Orchestra II on rating.
Cons: Presence sits about 2.8 dB low with a 5.5 dB dip near 5.4 kHz, while a 4.8 dB peak follows at 8.1 kHz, so the treble swings between recessed vocals and occasional sibilant edge. It rates below the IOAudio Volare, and no impedance or sensitivity figure is published.
Full Myer Audio CKLVX D62 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.59 dB standard deviation |
| Driver Type | Hybrid (2 dynamic + 6 balanced armature) |
| Drivers | 1 x 10mm dynamic + 1 x 8mm dynamic + 6 x balanced armature |
| Form Factor | In-ear |
| Harman Preference Score | 80 (median of 9 squig.link measurements, calibrated to AutoEQ) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz) |
| Tonal Tilt | -0.06 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Unique Melody 3DT: $399.00 Linsoul eBay
Pros: Four hobbyist measurements on squig.link give the 3DT a preference score of 79.0, with its three dynamic drivers producing a balanced response where every band from 60 Hz to 10 kHz sits within 1.6 dB of target. Midbass is gently lifted for warmth, and presence stays near neutral, so vocals sound clear and natural. At 113 dB sensitivity it runs easily from a phone.
Cons: A 7 dB peak near 8 kHz adds an edge to cymbals and sibilance that some listeners will find fatiguing. Sub-bass sits about 1.4 dB below target at 30 Hz, and it costs more than the equally rated Binary 1900 and Etymotic EVO.
Full Unique Melody 3DT review and specifications →
| Released | Apr 2022 (4 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.60 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 2 x 7mm dynamic + 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 79 (median of 4 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 25.4 ohms |
| Sensitivity | 113 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.4 dB at 30 Hz) |
| Tonal Tilt | +0.18 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons