Short answer: the Muse HiFi Power. It ranks #378 of 450 in-ear headphones by sound quality, rated 3.2/5, at $199. The Tipsy Dunmer Pro ranks #400, rated 2.9/5, at $189, $10 cheaper, which does not close the gap in sound quality.
The Muse HiFi Power is the better-sounding pick. A 14.5mm planar magnetic driver with about 2.3 dB of extra bass and sub-bass that stays within 6 dB of target down to 20 Hz, for a full, warm low end. Watch for: Squig.link measurements show a 12.7 dB peak near 11.9 kHz on top of a 6.5 dB dip near 6.5 kHz, so the lower treble sounds dim while the very top can add a hissy sheen.
What the Tipsy Dunmer Pro does well: It packs a hybrid design with one 9.2mm dynamic driver and two balanced armatures, and at 16 ohms and 105 dB it plays from a phone without an amp. The catch: In crinacle’s measurement it scores only 60.0 for preference, with a 3.26 dB deviation from target, so its response wanders far from what most listeners favor.
Buy the Muse HiFi Power. It is rated higher for sound quality, and the $10 you would save on the Tipsy Dunmer Pro does not close the gap.
Want more options? Browse the full Headphones rankings.
Specifications Side By Side
| Muse HiFi Power | Tipsy Dunmer Pro | |
|---|---|---|
| Price | $199.00 | $189.00 |
| Ranked | #378 of 450 in In-Ear Headphones | #400 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 64 (measured by crinacle, via AutoEQ) | 60 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.99 dB standard deviation | 3.26 dB standard deviation |
| Tonal Tilt | -0.51 (negative is warmer, positive brighter) | +0.42 (negative is warmer, positive brighter) |
| Connection | Wired | Wired |
| Driver Type | Planar magnetic | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 14.5mm planar magnetic | 1 x 9.2mm dynamic + 2 x balanced armature |
| Impedance | 32 ohms | 16 ohms |
| Sensitivity | 106 dB/mW | 105 dB |
| Frequency Response | 10Hz - 40kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.6 dB at 30 Hz) | - |
Related Headphone Comparisons
More worthwhile head-to-heads for Muse HiFi Power:
- Shanling ME200 vs Muse HiFi Power
- Sennheiser MOMENTUM True Wireless 4 vs Muse HiFi Power
- Shanling ME200 vs Tipsy Dunmer Pro
- Tipsy Dunmer Pro vs Etymotic ER3XR
- Audio-Technica ATH-CK2000Ti vs DUNU DK4001
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Muse HiFi Power: $199.00 Audio46 eBay
Pros: A 14.5mm planar magnetic driver with about 2.3 dB of extra bass and sub-bass that stays within 6 dB of target down to 20 Hz, for a full, warm low end. The midrange from 200 Hz to 3 kHz stays within a decibel of target, so vocals sound natural. At 32 ohms and 106 dB/mW it runs fine from a phone. It matches the rating of the FiiO FH7S for less money.
Cons: Squig.link measurements show a 12.7 dB peak near 11.9 kHz on top of a 6.5 dB dip near 6.5 kHz, so the lower treble sounds dim while the very top can add a hissy sheen. The Shanling ME200 and FiiO FH3 both rate higher for less money.
Full Muse HiFi Power review and specifications →
| Released | 2022 (4 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.99 dB standard deviation |
| Driver Type | Planar magnetic |
| Drivers | 1 x 14.5mm planar magnetic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 64 (measured by crinacle, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 106 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.6 dB at 30 Hz) |
| Tonal Tilt | -0.51 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.5 dB | 0.70 |
| Peak | 136 Hz | -2.9 dB | 0.34 |
| Peak | 7,851 Hz | +7.0 dB | 2.69 |
| Peak | 2,388 Hz | -5.3 dB | 2.11 |
| Peak | 651 Hz | +2.6 dB | 0.77 |
| High shelf | 10,000 Hz | -7.9 dB | 0.70 |
| Peak | 9,555 Hz | +4.3 dB | 2.98 |
| Peak | 4,757 Hz | -5.0 dB | 4.77 |
| Peak | 3,703 Hz | +2.2 dB | 3.53 |
| Peak | 6,695 Hz | +2.5 dB | 5.82 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Tipsy Dunmer Pro: $189.00 ShenzhenAudio eBay
Pros: It packs a hybrid design with one 9.2mm dynamic driver and two balanced armatures, and at 16 ohms and 105 dB it plays from a phone without an amp. It carries a higher rating than the Etymotic ER3XR, which sits at a similar price.
Cons: In crinacle’s measurement it scores only 60.0 for preference, with a 3.26 dB deviation from target, so its response wanders far from what most listeners favor. The FiiO FH7S earns a higher rating for not much more money.
Full Tipsy Dunmer Pro review and specifications →
| Released | Dec 2019 (6 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 3.26 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 9.2mm dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 60 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 105 dB |
| Tonal Tilt | +0.42 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +8.2 dB | 0.70 |
| Peak | 931 Hz | +4.2 dB | 0.90 |
| Peak | 85 Hz | -5.4 dB | 0.24 |
| Peak | 2,613 Hz | +4.7 dB | 0.93 |
| Peak | 6,877 Hz | -4.0 dB | 0.44 |
| High shelf | 10,000 Hz | -5.3 dB | 0.70 |
| Peak | 9,730 Hz | +2.5 dB | 3.06 |
| Peak | 4,915 Hz | -2.7 dB | 4.63 |
| Peak | 6,318 Hz | +2.9 dB | 6.00 |
| Peak | 3,958 Hz | +1.7 dB | 4.57 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons