Short answer: the Buchardt Audio E50 for better sound quality, the MoFi SourcePoint 8 for the lower price. The Buchardt Audio E50 ranks #16 of 130 bookshelf speakers at $4600. The MoFi SourcePoint 8 ranks #17 at $2594, $2006 cheaper.
What the MoFi SourcePoint 8 offers: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Watch for: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
What the Buchardt Audio E50 offers: Exceptional bass extension for a bookshelf - F3 at 40Hz, F10 at 34Hz - with genuinely low-end weight the reviewer kept noticing track after track, not just a single room-boosted note. Mid and lower-midrange are very neutral with no coloration and well-executed baffle-step compensation, so it doesn’t need to sit close to a wall like many bookshelf designs. Low distortion throughout the midrange, controlled ~60-degree horizontal directivity, and a striking driver/waveguide integration that looks genuinely upscale. Watch for: A roughly 3dB dip in the upper midrange/lower treble softens attack and dialogue clarity - the reviewer’s main complaint, and it’s baked into the crossover rather than a directivity artifact, so it’s audible both on and off axis. Sounds too bright pointed directly at the listener; needs about 10-20 degrees of toe-out to tame the treble and slightly smooth (not eliminate) that dip. Below-average sensitivity (measured 83.1dB vs 85dB spec) calls for a beefier amp, and the speaker’s tonal balance is unusually sensitive to amplifier output impedance - a poor tube amp can shift the midrange by up to 2dB.
Buy the MoFi SourcePoint 8 when the price outweighs sound quality for you, and the Buchardt Audio E50 when sound quality outweighs the price instead.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| MoFi SourcePoint 8 | Buchardt Audio E50 | |
|---|---|---|
| Price | $2594 per pair | $4600 per pair |
| Ranked | #17 of 130 in Large Size Bookshelf Speakers | #16 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) | 34Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) | 40Hz (measured, Erin's Audio Corner) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) | 15.6" x 7.5" x 11.2" (395 x 190 x 284 mm) |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) | 4 ohms nominal |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) | 83.1dB (2.83V/1m, measured by Erin's Audio Corner) |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter | 1" Scanspeak dome tweeter with waveguide, 6.5" Purifi extended-stroke woofer, dual 6.5" passive radiators |
| Weight | 28 lbs (12.7 kg) each | 19 lbs (8.6 kg) each |
| Woofer Cabinet | ported, rear | Passive radiator loaded |
| Spinorama Preference Score | 4.39 | 5.03 |
| Spinorama Preference Score with Perfect Sub | 6.53 | 6.80 |
| Crossover Frequency | - | 2000Hz |
| Frequency Response | - | 36Hz - 30kHz ±3dB (Manufacturer specified) |
| Recommended Power | - | 60W - 200W |
| Country | - | Denmark |
Related Speaker Comparisons
More worthwhile head-to-heads for Buchardt Audio E50:
- Buchardt Audio E50 vs Perlisten S4b
- KEF Reference 1 Meta vs Buchardt Audio E50
- Buchardt Audio E50 vs GR-Research NX-Studio
- March Audio Sointuva vs Buchardt Audio E50
- AsciLab C6B vs Buchardt Audio E50
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
MoFi SourcePoint 8: $2594 per pair Crutchfield eBay
Pros: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Measured bass extension of 52Hz (-3dB), with a measured sensitivity of 86.3dB.
Cons: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
Full MoFi SourcePoint 8 review and specifications →
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.39 |
| Spinorama Preference Score with Perfect Sub | 6.53 |
| Weight | 28 lbs (12.7 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Why Do People Love the MoFi SourcePoint 8? More from Erin’s Audio Corner →
- Erin’s Audio Corner Website MoFi SourcePoint 8
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- GR-Research: Danny Tackles Andrews Jones: The Source Point 8! Spoiler Alert (It’s Really Good) More from GR-Research →
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- MoFi SourcePoint 8 vs KEF R3
- MoFi SourcePoint 8 vs Epos ES14N
- MoFi SourcePoint 8 vs AsciLab F6Bs
- MoFi SourcePoint 8 vs Wharfedale Aura 2
- MoFi SourcePoint 8 vs Arendal 1528 Monitor 8
- MoFi SourcePoint 8 vs KEF Q Concerto Meta
- MoFi SourcePoint 8 vs Ascend Acoustics CMT-340 SE2
- MoFi SourcePoint 8 vs KEF R3 Meta
- See all 57 comparisons
Buchardt Audio E50: $4600 per pair Buchardt Audio eBay
Pros: Exceptional bass extension for a bookshelf - F3 at 40Hz, F10 at 34Hz - with genuinely low-end weight the reviewer kept noticing track after track, not just a single room-boosted note. Mid and lower-midrange are very neutral with no coloration and well-executed baffle-step compensation, so it doesn’t need to sit close to a wall like many bookshelf designs. Low distortion throughout the midrange, controlled ~60-degree horizontal directivity, and a striking driver/waveguide integration that looks genuinely upscale. Measured bass extension of 40Hz (-3dB), with a measured sensitivity of 83.1dB.
Cons: A roughly 3dB dip in the upper midrange/lower treble softens attack and dialogue clarity - the reviewer’s main complaint, and it’s baked into the crossover rather than a directivity artifact, so it’s audible both on and off axis. Sounds too bright pointed directly at the listener; needs about 10-20 degrees of toe-out to tame the treble and slightly smooth (not eliminate) that dip. Below-average sensitivity (measured 83.1dB vs 85dB spec) calls for a beefier amp, and the speaker’s tonal balance is unusually sensitive to amplifier output impedance - a poor tube amp can shift the midrange by up to 2dB.
Full Buchardt Audio E50 review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 40Hz (measured, Erin's Audio Corner) |
| Country | Denmark |
| Crossover Frequency | 2000Hz |
| Dimensions | 15.6" x 7.5" x 11.2" (395 x 190 x 284 mm) |
| Drivers | 1" Scanspeak dome tweeter with waveguide, 6.5" Purifi extended-stroke woofer, dual 6.5" passive radiators |
| Frequency Response | 36Hz - 30kHz ±3dB (Manufacturer specified) |
| Impedance | 4 ohms nominal |
| Recommended Power | 60W - 200W |
| Sensitivity | 83.1dB (2.83V/1m, measured by Erin's Audio Corner) |
| Spinorama Preference Score | 5.03 |
| Spinorama Preference Score with Perfect Sub | 6.80 |
| Weight | 19 lbs (8.6 kg) each |
| Woofer Cabinet | Passive radiator loaded |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Buchardt Audio E50 vs KEF R3
- Buchardt Audio E50 vs Wharfedale Aura 2
- Buchardt Audio E50 vs AsciLab F6Bs
- Buchardt Audio E50 vs KEF Q Concerto Meta
- Buchardt Audio E50 vs Arendal 1528 Monitor 8
- Buchardt Audio E50 vs KEF R3 Meta
- Buchardt Audio E50 vs Ascend Acoustics CMT-340 SE2
- Buchardt Audio E50 vs Wharfedale Super Linton
- See all 45 comparisons