Short answer: the RCF ART 710-A MK5 for most buyers, the KV2 EX10 for specialists chasing bass extension. These rank #11 and #12 out of 19 10-inch powered PA speakers, separated by a $2351 price gap.
The EX10 has a confirmed, deep-reaching measurement. Medium-quality vendor data gives it a 4.09 ideal-subwoofer preference score with 52Hz measured extension, one of the deepest results in this size class. The ART 710-A MK5’s local low-quality data has no computed preference score at all, so its measured extension of 69Hz and overall tonal balance carry more uncertainty.
Price and accessibility strongly favor the RCF. At $549 the ART 710-A MK5 is a fraction of the EX10’s roughly $2900 asking price. It is also lighter at 14.2kg, easy to carry to a gig, with FiRPHASE processing, EQ, limiting and protection built in.
The EX10 targets vocal clarity over convenience. Its 3-inch-diaphragm compression driver and integrated DSP handle crossover, phase alignment, EQ and protection, but the box has no onboard mixer or app control, and its own review notes that user controls are comparatively spare for the price.
Buy the RCF ART 710-A MK5 for an affordable, easy-to-carry box suited to buyers planning to add a subwoofer and who do not need app control.
Buy the KV2 Audio EX10 if the deeper confirmed bass extension and vocal-clarity-focused driver justify the higher cost for your application.
Specifications Side By Side
| KV2 Audio EX10 | RCF ART 710-A MK5 | |
|---|---|---|
| Price | $2,900.00 | $549.00 |
| Ranked | #11 of 19 in 10-Inch Two-Way Powered PA Speakers | #12 of 19 in 10-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 10" neodymium woofer, 1.4" exit/3" diaphragm compression driver | 10" woofer, 1.75" compression driver |
| Frequency Response | 65Hz - 20kHz (-3dB, manufacturer specified) | 50Hz - 20kHz (manufacturer specified) |
| Dimensions | 20.2"H x 12.2"W x 12.8"D (514 x 310 x 326 mm) | 21.6"H x 13.4"W x 12"D (548 x 340 x 305 mm) |
| Crossover Frequency | 1.6kHz (manufacturer specified) | 1600Hz |
| Amplifier Power | 500W continuous (450W LF + 50W HF, manufacturer specified) | 1400W peak (1000W LF + 400W HF) |
| Inputs | Balanced female XLR input; male XLR through output | XLR and 1/4-inch jack input; XLR output |
| Cabinet Material | Baltic birch plywood | PP composite |
| Bass Extension (-3dB) | 54.5Hz (measured, vendor Spinorama data) | 69Hz (measured, vendor Spinorama data) |
| DSP | Integrated crossover, phase alignment, EQ and protection | Yes, FiRPHASE, EQ, limiting and protection |
| Bluetooth | No | No |
| Coverage | - | 90° x 70° |
| Maximum SPL | - | 129dB peak (manufacturer specified) |
| Rigging | - | 2 x M10 inserts; 35mm pole mount |
| Weight | - | 31.3 lbs / 14.2 kg |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- RCF NX 910-A vs Yamaha DZR10
- Yamaha DXR10mkIII vs Vue Audiotechnik A-10
- Yamaha DXR10mkII vs Vue Audiotechnik A-10
- Yamaha DXR10mkII vs KV2 Audio EX10
- Vue Audiotechnik A-10 vs KV2 Audio EX10
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KV2 Audio EX10: $2,900.00 B&H Photo Video eBay
Pros: Medium-quality vendor data gives it a 4.09 ideal-subwoofer preference score with 52Hz measured extension, one of the deepest results in this ranking. Its 3-inch-diaphragm compression driver and integrated DSP target vocal clarity and controlled throw.
Cons: At a roughly $2,900 asking price this specialist box is far less accessible than the mainstream leaders, and user controls are comparatively spare without an onboard mixer or app control.
Full KV2 Audio EX10 review and specifications →
| Amplifier Power | 500W continuous (450W LF + 50W HF, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 54.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Baltic birch plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Crossover Frequency | 1.6kHz (manufacturer specified) |
| DSP | Integrated crossover, phase alignment, EQ and protection |
| Dimensions | 20.2"H x 12.2"W x 12.8"D (514 x 310 x 326 mm) |
| Drivers | 10" neodymium woofer, 1.4" exit/3" diaphragm compression driver |
| Frequency Response | 65Hz - 20kHz (-3dB, manufacturer specified) |
| Inputs | Balanced female XLR input; male XLR through output |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
RCF ART 710-A MK5: $549.00 Amazon B&H Photo Video Guitar Center eBay
Pros: A compact, affordable RCF with a 1.75-inch compression driver, 129dB claimed output and FiRPHASE processing, well suited to buyers who plan to cross to a subwoofer and do not need app control. At 14.2kg it is easy to carry.
Cons: The local low-quality manufacturer data has no computed preference score, making its measured tonal position uncertain.
Full RCF ART 710-A MK5 review and specifications →
| Amplifier Power | 1400W peak (1000W LF + 400W HF) |
|---|---|
| Bass Extension (-3dB) | 69Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | PP composite |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 70° |
| Crossover Frequency | 1600Hz |
| DSP | Yes, FiRPHASE, EQ, limiting and protection |
| Dimensions | 21.6"H x 13.4"W x 12"D (548 x 340 x 305 mm) |
| Drivers | 10" woofer, 1.75" compression driver |
| Frequency Response | 50Hz - 20kHz (manufacturer specified) |
| Inputs | XLR and 1/4-inch jack input; XLR output |
| Maximum SPL | 129dB peak (manufacturer specified) |
| Rigging | 2 x M10 inserts; 35mm pole mount |
| Weight | 31.3 lbs / 14.2 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons