Short answer: the Klipsch RP-5000F II. It ranks #38 of 56 floorstanding speakers by sound quality at $1199.98; the Focal Aria Evo X N°2 ranks #46 and costs $2399, so there is not much of a tradeoff to weigh.
The case for the Klipsch RP-5000F II: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. The tradeoff: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer.
What the Focal Aria Evo X N°2 gets right: Solid bass with a deliberate mid-bass bump (80-120Hz) that gives extra thump and weight, extending to about 40-50Hz in-room. The catch: Sounds very bright pointed directly at the listener - the tweeter comes in 5-6dB above the midrange with an unusually wide, roughly two-octave dip (1kHz-4kHz) leading into it, giving a laid-back.
Buy the Klipsch RP-5000F II. It ranks higher for sound quality than the Focal Aria Evo X N°2 and costs less, so there is no real case for the other one.
If sound quality matters at all to you, skip the Focal Aria Evo X N°2. It ranks near the bottom of the 56 floorstanding speakers, so look higher up the list instead.
Specifications Side By Side
| Klipsch RP-5000F II | Focal Aria Evo X N°2 | |
|---|---|---|
| Price | $1199.98 | $2399 |
| Ranked | #38 of 56 in Large Size Floorstanding Speakers | #46 of 56 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 41Hz (measured, Erin’s Audio Corner) | 38Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 55Hz (measured, Erin’s Audio Corner) | 50Hz (measured, Erin’s Audio Corner) |
| Sensitivity | 90dB (2.83V/1m, measured by Erin’s Audio Corner) | 88.2dB (2.83V/1m, measured by Erin’s Audio Corner; 91.5dB Manufacturer specified) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers | Aluminum-magnesium inverted dome tweeter with waveguide, 6.5" flax midrange, dual 6.5" flax midbass woofers |
| Weight | 38.6 lbs / 17.5 kg | 55.1 lbs / 25 kg (55 lbs) each |
| Impedance | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin’s Audio Corner) | 8 ohms nominal (2.9 ohms minimum, Manufacturer specified; 3.4 ohms minimum measured by Erin’s Audio Corner) |
| Frequency Response | 40Hz - 25kHz (+-3dB, Manufacturer specified) | 45Hz - 30kHz (Manufacturer specified) |
| Crossover Frequency | 1900Hz | - |
| Output Power | 100W continuous, 400W peak | - |
| Dimensions | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) | 40.7"H x 14.6"W x 11.6"D (1035 x 371 x 294 mm) (40.25 x 14.62 x 11.56 in) |
| Woofer Cabinet | ported, rear | 3-way, bass reflex (bottom-firing port, requires plinth) |
| Recommended Power | - | 40-250W |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- KLH Model Five vs Klipsch RP-8000F II
- Arendal 1961 Tower vs KLH Model Five
- KEF Q11 Meta vs KLH Model Five
- Q Acoustics 5040 vs Focal Aria Evo X N°2
- Dynaudio Emit 30 vs Focal Aria Evo X N°2
The Two Speakers In Full
Klipsch RP-5000F II: $1199.98 Amazon
Pros: The most tonally coherent of the RP II floorstander line, with a mild baffle-step dip and treble tilt but no additional coloration issues beyond that. Precise imaging thanks to the controlled horn/waveguide directivity.
Cons: Bass extension is underwhelming for a floorstander - F3 at 55Hz, F10 at 41Hz - and needs a subwoofer. Narrow horizontal dispersion (~50-60 degrees) trades soundstage width for imaging precision. A mild high-frequency tilt and a slight lack of detail around 1-1.5kHz.
Full Klipsch RP-5000F II review and specifications →
| Bass Extension (-10dB) | 41Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 1900Hz |
| Dimensions | 36.1" x 8.1" x 14.8" (917 x 207 x 375 mm) |
| Drivers | 1" titanium tweeter with Tractrix horn, dual 5.25" cerametallic woofers |
| Frequency Response | 40Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal, 3.3 ohms minimum (measured above 80Hz, Erin's Audio Corner) |
| Output Power | 100W continuous, 400W peak |
| Sensitivity | 90dB (2.83V/1m, measured by Erin's Audio Corner) |
| Weight | 38.6 lbs / 17.5 kg |
| Woofer Cabinet | ported, rear |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-5000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-5000F II vs KEF Q11 Meta
- Klipsch RP-5000F II vs Monolith THX-365T
- Klipsch RP-5000F II vs Klipsch RP-8000F II
- Klipsch RP-5000F II vs Klipsch Heresy IV
- Klipsch RP-5000F II vs Dynaudio Emit 30
- Klipsch RP-5000F II vs Klipsch Forte IV
- Klipsch RP-5000F II vs Klipsch RP-6000F II
- See all 14 comparisons
Focal Aria Evo X N°2: $2399 Music Direct
Pros: Solid bass with a deliberate mid-bass bump (80-120Hz) that gives extra thump and weight, extending to about 40-50Hz in-room. High sensitivity (measured 88.2dB) makes it easy to drive, and distortion is low throughout the range even at high output - the reviewer found only a minor compression “glare” around 4.5kHz at very high volumes, not a real concern. Directivity components (mid-range and tweeter) transition smoothly rather than abruptly, and the overall soundstage is wide and enveloping.
Cons: Sounds very bright pointed directly at the listener - the tweeter comes in 5-6dB above the midrange with an unusually wide, roughly two-octave dip (1kHz-4kHz) leading into it, giving a laid-back, low-attack character even after toeing out ~20 degrees. Fixing this properly requires real EQ (a mini DSP or similar), not just toe-out or absorption alone; without EQ, expect it to sound bright for stereo listening. A mild dip around 200Hz makes male vocals sound slightly subdued. Narrow vertical directivity (about +/-15 degrees) means you need to stay close to tweeter-axis height. Impedance dips to 3.4 ohms (EPDR 1.4 ohms), so it wants a 4-ohm-capable amplifier, and requires a plinth for floor clearance since it’s bottom-ported.
Full Focal Aria Evo X N°2 review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 50Hz (measured, Erin's Audio Corner) |
| Dimensions | 40.7"H x 14.6"W x 11.6"D (1035 x 371 x 294 mm) (40.25 x 14.62 x 11.56 in) |
| Drivers | Aluminum-magnesium inverted dome tweeter with waveguide, 6.5" flax midrange, dual 6.5" flax midbass woofers |
| Frequency Response | 45Hz - 30kHz (Manufacturer specified) |
| Impedance | 8 ohms nominal (2.9 ohms minimum, Manufacturer specified; 3.4 ohms minimum measured by Erin's Audio Corner) |
| Recommended Power | 40-250W |
| Sensitivity | 88.2dB (2.83V/1m, measured by Erin's Audio Corner; 91.5dB Manufacturer specified) |
| Weight | 55.1 lbs / 25 kg (55 lbs) each |
| Woofer Cabinet | 3-way, bass reflex (bottom-firing port, requires plinth) |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Focal Aria Evo X N°2 vs Sony SS-CS3
- Focal Aria Evo X N°2 vs Polk T50
- Focal Aria Evo X N°2 vs Klipsch RP-6000F II
- Focal Aria Evo X N°2 vs Infinity Reference 253
- Focal Aria Evo X N°2 vs Dynaudio Emit 30
- Focal Aria Evo X N°2 vs JBL Stage 2 280F
- Focal Aria Evo X N°2 vs Klipsch RP-8000F II
- Focal Aria Evo X N°2 vs Magnepan LRS+
- See all 14 comparisons