Short answer: the KEF R11 Meta. It ranks #26 of 73 floorstanding speakers by sound quality, rated 4.4/5, at $6,999.98; the Perlisten R7t ranks #32, rated 4.3/5, and costs $9,990, which makes this an easy call rather than a real tradeoff.
The case for the KEF R11 Meta: CEA2034 spinorama shows a generally flat on-axis response with good directivity and very deep bass extension (F10 of 30Hz). The catch: A dip around 1-1.2kHz on-axis is attributed to a diffraction effect, and shows up as a smaller dip in the predicted in-room response.
Why pick the Perlisten R7t: The flagship of Perlisten’s R-series towers, a 4-way design with four 165mm woofers reaching a measured -3dB extension point of 49.1Hz. The tradeoff: Listening-window smoothness (0.567) and sound-power smoothness (0.380) are middling for a flagship-tier tower, with on-axis deviation of 0.341dB, a fairly pronounced -0.29dB per octave downward tilt, and a predicted in-room smoothness of just 0.44.
Buy the KEF R11 Meta. It is rated higher for sound quality than the Perlisten R7t and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| KEF R11 Meta | Perlisten R7t | |
|---|---|---|
| Price | $6,999.98 per pair | $9,990 per pair |
| Ranked | #26 of 73 in Large Size Floorstanding Speakers | #32 of 73 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 31Hz (measured, Audio Science Review) | - |
| Bass Extension (-3dB) | 64Hz (measured, Audio Science Review) | 49.1Hz (manufacturer spinorama data, vented configuration) |
| Dimensions | 51”H x 12.2”W x 15.1”D (1295.4 x 309.9 x 383.5 mm) | 49.9”H x 9.1”W x 13.8”D (1268 x 230 x 350 mm) |
| Impedance | 4 ohms | 4 ohms nominal, 3.1 ohms minimum |
| Drivers | 4 x 165 mm (6.5 in.) hybrid aluminium cone woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) vented aluminium dome with MAT tweeter | 3x 26mm silk dome (tweeter + 2 midrange), 4x 165mm (6.5”) HPF woofers |
| Sensitivity | 89.5dB | 90.0dB @ 2.83V/1m |
| Weight | 80.5 lbs (36.5 kg) each | 105.8 lbs (48.0 kg) each |
| Woofer Cabinet | ported, rear | - |
| Spinorama Preference Score | 5.91 | 6.31 |
| Spinorama Preference Score with Perfect Sub | 7.32 | 8.12 |
| DIY Kit | No | No |
| Enclosure | - | 4-way, bass-reflex / acoustic-suspension convertible |
| Bass Extension | - | 27Hz in bass-reflex mode |
| Country | - | Designed in the United States (Verona, Wisconsin) |
Related Speaker Comparisons
How KEF R11 Meta compares with other leading options:
- KEF R11 Meta vs KEF Blade Two Meta
- MoFi SourcePoint V10 Master Edition vs KEF R11 Meta
- KEF R11 Meta vs MoFi SourcePoint 888
- KEF R11 Meta vs Revel F328Be
- Radiant Acoustics Clarity 66 vs KEF R11 Meta
Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF R11 Meta: $6,999.98 per pair Amazon eBay
Pros: CEA2034 spinorama shows a generally flat on-axis response with good directivity and very deep bass extension (F10 of 30Hz). Predicted in-room response is very smooth aside from the small 1-1.5kHz dip. The coaxial Uni-Q driver gives excellent, symmetric vertical directivity, unusual for a tower speaker. Distortion is incredibly low even down to 30Hz at 86dB SPL/1m, and stays low even at 96dB and 102dB SPL/1m: the reviewer found essentially no audible tonality change across that whole output range. Measured bass extension of 64Hz (-3dB).
Cons: A dip around 1-1.2kHz on-axis is attributed to a diffraction effect, and shows up as a smaller dip in the predicted in-room response. Horizontal beamwidth of about ±40 degrees is on the narrower side, though the transition from wide to constant directivity is smooth. Minimum impedance dips to 3.2 ohms around 580Hz, calling for an amplifier comfortable with a demanding load. 4-ohm nominal impedance overall.
Full KEF R11 Meta review and specifications →
| Bass Extension (-10dB) | 31Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 64Hz (measured, Audio Science Review) |
| DIY Kit | No |
| Dimensions | 51”H x 12.2”W x 15.1”D (1295.4 x 309.9 x 383.5 mm) |
| Drivers | 4 x 165 mm (6.5 in.) hybrid aluminium cone woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) vented aluminium dome with MAT tweeter |
| Impedance | 4 ohms |
| Sensitivity | 89.5dB |
| Spinorama Preference Score | 5.91 |
| Spinorama Preference Score with Perfect Sub | 7.32 |
| Weight | 80.5 lbs (36.5 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Perlisten R7t: $9,990 per pair Audio Advice eBay
Pros: The flagship of Perlisten’s R-series towers, a 4-way design with four 165mm woofers reaching a measured -3dB extension point of 49.1Hz. The Harman in-room extension estimate (lfx) is a deeper 38Hz, since that metric accounts for room gain the anechoic -3dB figure doesn’t. Sensitivity of 90.0dB makes it easy to drive at high output.
Cons: Listening-window smoothness (0.567) and sound-power smoothness (0.380) are middling for a flagship-tier tower, with on-axis deviation of 0.341dB, a fairly pronounced -0.29dB per octave downward tilt, and a predicted in-room smoothness of just 0.44. It’s sold only through specialty AV dealers at a per-unit price.
Full Perlisten R7t review and specifications →
| Bass Extension | 27Hz in bass-reflex mode |
|---|---|
| Bass Extension (-3dB) | 49.1Hz (manufacturer spinorama data, vented configuration) |
| Country | Designed in the United States (Verona, Wisconsin) |
| DIY Kit | No |
| Dimensions | 49.9”H x 9.1”W x 13.8”D (1268 x 230 x 350 mm) |
| Drivers | 3x 26mm silk dome (tweeter + 2 midrange), 4x 165mm (6.5”) HPF woofers |
| Enclosure | 4-way, bass-reflex / acoustic-suspension convertible |
| Impedance | 4 ohms nominal, 3.1 ohms minimum |
| Sensitivity | 90.0dB @ 2.83V/1m |
| Spinorama Preference Score | 6.31 |
| Spinorama Preference Score with Perfect Sub | 8.12 |
| Weight | 105.8 lbs (48.0 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons