Short answer: the Emotiva Airmotiv T2+. It ranks #30 of 71 floorstanding speakers by sound quality at $999; the KEF Q11 Meta ranks #46 and costs $1249.99, so there is not much of a tradeoff to weigh.
What the KEF Q11 Meta offers: Three-way tower design with a coaxial layout: a 3/4” aluminum dome tweeter (with KEF’s Metamaterial Absorption Technology behind it) mounted at the center of a 4” mid-range, plus three 6.5” bass drivers. Extremely linear estimated in-room response when placed correctly, thanks to a deliberately declining on-axis response paired with well-controlled directivity - a technically sound design philosophy, even though it reads as “dark” in raw anechoic on-axis measurements. In-room bass extension to about 40-50Hz when placed near a wall, thanks to extended bass-shelf tuning. Sounds excellent whether pointed directly at the listener or toed out a full 30° parallel to the back wall - unusually flexible placement. More vertical listening leeway than standard non-coaxial two-way designs, thanks to the coincident tweeter/midrange. Distortion looks good at both 86dB and 96dB, and multitone distortion holds up well too. Comes with a plinth/outrigger kit for stability given its floorstanding height (about 43-44”). Watch for: Genuinely dark-sounding on raw on-axis measurement, and needs a typical room with sidewall reflections (within about 6 feet/2 meters) to sound properly neutral - in a large room with little sidewall interaction, it may sound too dull for some listeners. Must be placed close to a rear wall (about 1 foot) to get proper bass - pulling it out to the “standard” 3-foot audiophile recommendation causes bass output to drop off noticeably. Horizontal radiation of about ±50° is narrower than the reviewer’s preferred ±60°, giving a slightly less enveloping soundstage than some rivals. Notably darker than sibling KEF models in the same product family - measures 2-5dB less top-end energy than the R3 Meta and a few dB less than the Q Concerto Meta. Minor lingering resonances appear in burst decay measurements between 500Hz-1kHz. The tweeter shows some strain at very high output volumes, a limitation the reviewer notes is common even among more budget-friendly speakers generally.
What the Emotiva Airmotiv T2+ offers: High-value three-way tower with strong output and unusually deep usable sealed-room bass for the price. Erin measured F3 at 62Hz and F10 at 32Hz, with sensitivity just under 90dB/2.83V/1m. Dual 8-inch woven-fiber woofers relieve the 5.25-inch midrange, and the 32mm folded-ribbon tweeter provides broad horizontal coverage. Approximately +/-2.5dB response linearity, solid cabinet bracing and low compression allow substantial playback levels; the gradual low-frequency roll-off integrates well with either room gain or a subwoofer. Watch for: The nominal 4-ohm system approaches 3 ohms near 100Hz in Erin’s measurement, so a high-current amplifier is preferable. Horizontal and especially vertical directivity through the midrange/tweeter transition is less uniform than the best waveguided or coaxial designs; listener height and nearby reflections matter, and EQ cannot correct the narrowing mismatch. The large rear-ported cabinet needs placement clearance, and its deep F10 should not be confused with flat 30Hz output at cinema levels.
Buy the Emotiva Airmotiv T2+. It ranks higher for sound quality than the KEF Q11 Meta and costs less, so there is no real case for the other one.
Specifications Side By Side
| KEF Q11 Meta | Emotiva Airmotiv T2+ | |
|---|---|---|
| Price | $1,249.99 | $999/pair |
| Ranked | #46 of 71 in Large Size Floorstanding Speakers | #30 of 71 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 29Hz (measured, Erin’s Audio Corner) | 32Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 60Hz (measured, Erin’s Audio Corner) | 62Hz (measured, Erin’s Audio Corner) |
| Drivers | 25mm tweeter + dual 165mm drivers | 32mm folded-ribbon tweeter; 5.25" midrange; dual 8" woofers |
| Weight | 106.9 lbs / 48.5 kg | 56.9 lb each |
| Sensitivity | 88.6dB (measured, Erin’s Audio Corner) | Approximately 89.5dB/2.83V/1m (measured, Erin’s Audio Corner) |
| Impedance | 4 ohms nominal (3.2 ohms minimum, measured, Erin’s Audio Corner) | Approximately 3 ohms minimum near 100Hz (measured, Erin’s Audio Corner) |
| Dimensions | 43.8"H x 12.5"W x 15"D (1112.8 x 317.5 x 381.0 mm) | 42.7"H x 12.2"W x 12.3"D |
| Woofer Cabinet | ported, rear | ported, rear |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- JBL Studio 698 vs KLH Model Five
- JBL Studio 698 vs Morel Avyra 633
- Revel Concerta2 F35 vs KLH Model Five
- Emotiva Airmotiv T2+ vs Q Acoustics 5040
- Dynaudio Emit 30 vs Emotiva Airmotiv T2+
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF Q11 Meta: $1,249.99 Amazon eBay
Pros: Three-way tower design with a coaxial layout: a 3/4” aluminum dome tweeter (with KEF’s Metamaterial Absorption Technology behind it) mounted at the center of a 4” mid-range, plus three 6.5” bass drivers. Extremely linear estimated in-room response when placed correctly, thanks to a deliberately declining on-axis response paired with well-controlled directivity - a technically sound design philosophy, even though it reads as “dark” in raw anechoic on-axis measurements. In-room bass extension to about 40-50Hz when placed near a wall, thanks to extended bass-shelf tuning. Sounds excellent whether pointed directly at the listener or toed out a full 30° parallel to the back wall - unusually flexible placement. More vertical listening leeway than standard non-coaxial two-way designs, thanks to the coincident tweeter/midrange. Distortion looks good at both 86dB and 96dB, and multitone distortion holds up well too. Comes with a plinth/outrigger kit for stability given its floorstanding height (about 43-44”).
Cons: Genuinely dark-sounding on raw on-axis measurement, and needs a typical room with sidewall reflections (within about 6 feet/2 meters) to sound properly neutral - in a large room with little sidewall interaction, it may sound too dull for some listeners. Must be placed close to a rear wall (about 1 foot) to get proper bass - pulling it out to the “standard” 3-foot audiophile recommendation causes bass output to drop off noticeably. Horizontal radiation of about ±50° is narrower than the reviewer’s preferred ±60°, giving a slightly less enveloping soundstage than some rivals. Notably darker than sibling KEF models in the same product family - measures 2-5dB less top-end energy than the R3 Meta and a few dB less than the Q Concerto Meta. Minor lingering resonances appear in burst decay measurements between 500Hz-1kHz. The tweeter shows some strain at very high output volumes, a limitation the reviewer notes is common even among more budget-friendly speakers generally.
Full KEF Q11 Meta review and specifications →
| Bass Extension (-10dB) | 29Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Erin's Audio Corner) |
| Dimensions | 43.8"H x 12.5"W x 15"D (1112.8 x 317.5 x 381.0 mm) |
| Drivers | 25mm tweeter + dual 165mm drivers |
| Impedance | 4 ohms nominal (3.2 ohms minimum, measured, Erin's Audio Corner) |
| Sensitivity | 88.6dB (measured, Erin's Audio Corner) |
| Weight | 106.9 lbs / 48.5 kg |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- KEF Q11 Meta vs KLH Model Five
- KEF Q11 Meta vs Klipsch RP-5000F II
- KEF Q11 Meta vs Klipsch Heresy IV
- KEF Q11 Meta vs SVS Ultra Evolution Pinnacle
- KEF Q11 Meta vs Polk Audio XT60
- KEF Q11 Meta vs Monolith THX-365T
- KEF Q11 Meta vs Klipsch Forte IV
- KEF Q11 Meta vs Klipsch RP-8000F II
- See all 42 comparisons
Emotiva Airmotiv T2+: $999/pair Emotiva eBay
Pros: High-value three-way tower with strong output and unusually deep usable sealed-room bass for the price. Erin measured F3 at 62Hz and F10 at 32Hz, with sensitivity just under 90dB/2.83V/1m. Dual 8-inch woven-fiber woofers relieve the 5.25-inch midrange, and the 32mm folded-ribbon tweeter provides broad horizontal coverage. Approximately +/-2.5dB response linearity, solid cabinet bracing and low compression allow substantial playback levels; the gradual low-frequency roll-off integrates well with either room gain or a subwoofer.
Cons: The nominal 4-ohm system approaches 3 ohms near 100Hz in Erin’s measurement, so a high-current amplifier is preferable. Horizontal and especially vertical directivity through the midrange/tweeter transition is less uniform than the best waveguided or coaxial designs; listener height and nearby reflections matter, and EQ cannot correct the narrowing mismatch. The large rear-ported cabinet needs placement clearance, and its deep F10 should not be confused with flat 30Hz output at cinema levels.
Full Emotiva Airmotiv T2+ review and specifications →
| Bass Extension (-10dB) | 32Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 62Hz (measured, Erin's Audio Corner) |
| Dimensions | 42.7"H x 12.2"W x 12.3"D |
| Drivers | 32mm folded-ribbon tweeter; 5.25" midrange; dual 8" woofers |
| Impedance | Approximately 3 ohms minimum near 100Hz (measured, Erin's Audio Corner) |
| Sensitivity | Approximately 89.5dB/2.83V/1m (measured, Erin's Audio Corner) |
| Weight | 56.9 lb each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Emotiva Airmotiv T2+ vs Polk Audio Reserve R700
- Emotiva Airmotiv T2+ vs JBL HDI-3600
- Emotiva Airmotiv T2+ vs Q Acoustics 5040
- Emotiva Airmotiv T2+ vs KEF R11 Meta
- Emotiva Airmotiv T2+ vs PSB Imagine T65
- Emotiva Airmotiv T2+ vs ELAC Debut 3.0 DF63
- Emotiva Airmotiv T2+ vs Polk Reserve R500
- Emotiva Airmotiv T2+ vs Revel Concerta2 F35
- See all 24 comparisons