KEF Blade Two Meta vs Revel Concerta2 F35

Last updated: September 23, 2026

Short answer: the Blade Two Meta for full-range coherence, the Revel Concerta2 F35 only with a subwoofer. The Blade’s coincident mid/tweeter and four 6.5in mid-bass drivers provide matched ~50 degree horizontal dispersion, offset by a 2dB dip and slight resonance around 200Hz. The F35 pairs a 1-inch aluminum dome tweeter on a waveguide with a 5.25-inch mid-range, but its 61Hz F3 and 39Hz F10 mean a subwoofer is needed for real bass.

KEF Blade Two Meta vs Revel Concerta2 F35

On the KEF Blade Two Meta side: True point-source coaxial design (four 6.5in mid-bass drivers flanking a coincident mid/tweeter) with matched ~50 degree horizontal. Set against that: 2dB dip and slight resonance around 200Hz, also visible in KEF white paper and likely cabinet-related.

The case for the Revel Concerta2 F35: Two-and-a-half-way, four-driver design: a 1” aluminum dome tweeter on a waveguide, a 5.25” mid-range. The tradeoff: F3 of 61Hz and F10 of 39Hz mean a subwoofer is needed for real bass extension.

Buy the KEF Blade Two Meta if sound quality is the priority over the price, or the Revel Concerta2 F35 if the price is the priority over sound quality.

Looking for alternatives? See the complete Passive Home rankings.

Specifications Side By Side

KEF Blade Two Meta Revel Concerta2 F35
Price$28000 per pair only sold in stores$900 per pair
Ranked#2 of 71 in Large Size Floorstanding Speakers#23 of 71 in Large Size Floorstanding Speakers
Bass Extension (-10dB)26Hz (measured, Erin's Audio Corner)50Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)31Hz (measured, Erin's Audio Corner)70Hz (measured, Erin's Audio Corner)
Dimensions46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm)40.3"H x 8.4"W x 12.2"D (1023.6 x 213.4 x 309.9 mm)
Impedance4 ohms nominal (3.3 ohms minimum, measured, Erin's Audio Corner)6 ohms nominal (3.8 ohms minimum, measured by Erin's Audio Corner)
Drivers4 x 165 mm (6.5 in.) aluminium cone, force cancelling woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) aluminium dome with MAT tweeter3x 5.25" deep anodized aluminum cone woofers, 1" Aluminum Tweeter
Sensitivity86.8dB (measured, Erin's Audio Corner)89.4dB (measured, Erin's Audio Corner; 90dB manufacturer specified)
Weight79.4 lbs (36 kg) each41 lbs (18.6 kg) each
Woofer Cabinetported, rearported, rear
Spinorama Preference Score6.254.44
Spinorama Preference Score with Perfect Sub7.376.38
DIY KitNoNo

More worthwhile head-to-heads for KEF Blade Two Meta:

Prices on this page were last checked September 23, 2026 at 11:24 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

KEF Blade Two Meta: $28000 per pair only sold in stores eBay

KEF Blade Two Meta ranking card

Pros: True point-source coaxial design (four 6.5in mid-bass drivers flanking a coincident mid/tweeter) with matched ~50 degree horizontal and vertical dispersion, unusual for a multi-driver speaker. Fully rounded, edgeless cabinet eliminates baffle diffraction. Frequency response holds within about 2.5dB across the listening window. Extremely low harmonic and multitone distortion even at 96dB, with under 0.5dB of compression at full output, rivaling the Reference 1 Meta and JBL 4367 in dynamic range. Reviewer described the imaging and soundstage depth as revealing recording details other speakers he tested (PS Audio FR10, MoFi SourcePoint 8, Neumann KH80) masked. Available in any custom finish at no extra charge. Measured bass extension of 31Hz (-3dB), with a measured sensitivity of 86.8dB.

Cons: 2dB dip and slight resonance around 200Hz, also visible in KEF white paper and likely cabinet-related. Bass rolls off fairly quickly below its 31Hz F3. Horizontal dispersion (~50 degrees) is narrower than the reviewer preferred 70-80 degrees; benefits from toeing out 10-20 degrees to open soundstage without losing image focus. Needs a separate power amp, not AVR-friendly.

Bass Extension (-10dB)26Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)31Hz (measured, Erin's Audio Corner)
DIY KitNo
Dimensions46.6"H x 13.5"W x 14.8"D (1183.6 x 342.9 x 375.9 mm)
Drivers4 x 165 mm (6.5 in.) aluminium cone, force cancelling woofers, 125 mm (5 in.) aluminium cone midrange, 25 mm (1 in.) aluminium dome with MAT tweeter
Impedance4 ohms nominal (3.3 ohms minimum, measured, Erin's Audio Corner)
Sensitivity86.8dB (measured, Erin's Audio Corner)
Spinorama Preference Score6.25
Spinorama Preference Score with Perfect Sub7.37
Weight79.4 lbs (36 kg) each
Woofer Cabinetported, rear

Revel Concerta2 F35: $900 per pair Crutchfield eBay

Revel Concerta2 F35 ranking card

Pros: Two-and-a-half-way, four-driver design: a 1” aluminum dome tweeter on a waveguide, a 5.25” mid-range, and dual 5.25” mid-bass drivers in a rear-ported cabinet. Measured sensitivity of 89.4dB closely matches the 90dB spec, and distortion looks good at both 86dB and 96dB, holding up well even with a high-pass filter applied. At its sale price (around $900/pair, down from full retail), the reviewer calls it a “no-brainer,” undercutting comparable budget floorstanders like the ELAC DF63. Frequency response and directivity mismatches are largely EQ-able, since most of what shows up in measurements traces to physical tweeter/mid-range separation rather than a fundamental flaw. Compression is fairly well controlled for the price - about 1dB of loss around 100Hz under long-term compression, described as “par for the course” at this cost. Measured bass extension of 70Hz (-3dB), with a measured sensitivity of 89.4dB.

Cons: F3 of 61Hz and F10 of 39Hz mean a subwoofer is needed for real bass extension. A dip in the lower midrange/2-3kHz region reduces attack and detail, and a peak around 5kHz adds some edge and sibilance in the lower treble. A peak in off-axis energy around 3kHz reflects off sidewalls at roughly 60-70° off-axis and arrives louder than the direct sound - this specific issue can’t be fixed with EQ (boosting the direct sound would boost the stronger reflection too) and would need acoustic absorption to properly address, though the reviewer considers it a minor, optional fix at this price. A couple of minor resonances appear in the impedance plot, including one around 300Hz that may partly explain a subtle sense of vocal warmth noticed in listening, though it’s more likely room-related. Minimum impedance around 3.8 ohms. Short-term compression testing shows some increased distortion in the tweeter and higher-frequency compression at loud output.

Bass Extension (-10dB)50Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)70Hz (measured, Erin's Audio Corner)
DIY KitNo
Dimensions40.3"H x 8.4"W x 12.2"D (1023.6 x 213.4 x 309.9 mm)
Drivers3x 5.25" deep anodized aluminum cone woofers, 1" Aluminum Tweeter
Impedance6 ohms nominal (3.8 ohms minimum, measured by Erin's Audio Corner)
Sensitivity89.4dB (measured, Erin's Audio Corner; 90dB manufacturer specified)
Spinorama Preference Score4.44
Spinorama Preference Score with Perfect Sub6.38
Weight41 lbs (18.6 kg) each
Woofer Cabinetported, rear