Short answer: the Genelec 8320A for better sound quality, the IK Multimedia iLoud MTM MKII for the lower price. The Genelec 8320A ranks #9 of 58 powered bookshelf speakers at $850. The IK Multimedia iLoud MTM MKII ranks #20 at $799.99, $50.01 cheaper.
What the IK Multimedia iLoud MTM MKII offers: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size. Watch for: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
What the Genelec 8320A offers: The Directivity Control Waveguide and die cast aluminum Minimum Diffraction Enclosure produce a listening window smoothness score of 0.53 and a low frequency alignment Q of just 0.227, the cleanest, least resonant bass rolloff of any speaker in this whole batch. It network calibrates through Genelec’s GLM software for automatic room correction, and Intelligent Signal Sensing drops standby power to under 0.5W. Watch for: On axis deviation measures 0.169dB average, decent but not class leading next to the AsciLab and Audio Smile entries in this batch. The compact 4.1 inch woofer limits low frequency extension to a measured 67.4Hz at -3dB, so a subwoofer is needed for full range use. The GLM calibration kit that unlocks its room correction features is sold separately from the speaker price, and max SPL tops out around 100dB, modest next to Genelec’s larger 8000 series monitors.
Buy the IK Multimedia iLoud MTM MKII if the price matters more than sound quality. Buy the Genelec 8320A if sound quality matters more than the price.
Specifications Side By Side
| IK Multimedia iLoud MTM MKII | Genelec 8320A | |
|---|---|---|
| Price | $799.99 | $850 each |
| Ranked | #20 of 58 in Medium Size Powered Bookshelf Speakers | #9 of 58 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) | 9.5"H x 5.9"W x 5.6"D (242 x 151 x 142 mm) (9.5 x 5.9 x 5.6 in) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) | 55Hz-23kHz -6dB |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin’s Audio Corner) | 67.4Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 46.3Hz (measured, Erin’s Audio Corner) | 53.2Hz (measured, Audio Science Review) |
| Inputs | XLR | - |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter | 0.75" metal dome tweeter, 4.1" cone woofer |
| App | Yes (X-MONITOR speaker emulation) | - |
| Bluetooth | No | - |
| EQ | Yes (Room adjustment) | - |
| Output Power | 100w Per Speaker | - |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each | 7.1 lbs / 3.2 kg (7.1 lbs) each |
| Max SPL | 112.5dB peak | Peak 107dB |
| Enclosure | - | ported |
| Power Output (Watts) | - | 100W total (50W woofer, 50W tweeter, Class D) |
| Warranty | - | 2 years (5 with product registration) |
| Country | - | Finland |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Airpulse A100 vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM vs Dynaudio LYD 5
- IK Multimedia iLoud MTM vs Vanatoo Transparent One Encore Plus
- IK Multimedia iLoud MTM vs Genelec 8320A
- IK Multimedia iLoud MTM MKII vs Audioengine HD6
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
IK Multimedia iLoud MTM MKII: $799.99 Amazon eBay
Pros: Compact MTM layout (two 3.5” midwoofers flanking a 1” tweeter) powered monitor rated at 100W per speaker with XLR input, sold as a pair with an ARC room-correction microphone included. Well-suited to nearfield desktop use, with linearity good enough for mixing or mastering. The bundled auto room-correction mic is genuinely effective - in testing it resolved specific room resonance peaks around 150Hz and 220Hz, making the midrange sound noticeably more lifelike. Back-panel switches allow desktop vs. free-field placement plus treble and bass trim. Harmonic distortion is good at a moderate 86dB output, appropriate for a speaker of this size.
Cons: Native treble tuning still runs about 3dB hot on-axis; the back-panel -3dB treble switch overcorrects, and roughly -1.5dB via external EQ works better. Vertical MTM lobing means staying within about 20-25° of the tweeter axis, or the upper-midrange to treble transition suffers significant suckout - the speaker should never be laid on its side unless the tweeter is pointed directly at the listener, or comb filtering results. Bass falls off sharply below its F3 of 51Hz (F10 45Hz), so a subwoofer is needed for anything lower. Multitone distortion rises sharply at 96dB/1m, and the reviewer recommends not exceeding about 86dB for extended listening at any distance - broadband output for the pair tops out around 94dB at 1 meter, with dynamic range essentially collapsing approaching 102dB. Horizontal directivity narrows with frequency rather than staying constant. Adding a subwoofer with an 80Hz crossover doesn’t meaningfully improve the distortion headroom, even though it does extend the low end.
Full IK Multimedia iLoud MTM MKII review and specifications →
| App | Yes (X-MONITOR speaker emulation) |
|---|---|
| Bass Extension (-10dB) | 46.3Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 52.7Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 10.4"H x 5.1"W x 6.3"D (264.2 x 129.5 x 160 mm) |
| Drivers | 2x 3.5" (89mm) woofers, 1" silk dome tweeter |
| EQ | Yes (Room adjustment) |
| Frequency Response | 48 Hz - 28 kHz (±2dB) (Manufacturer specified) |
| Inputs | XLR |
| Max SPL | 112.5dB peak |
| Output Power | 100w Per Speaker |
| Weight | 5.5 lbs / 2.5 kg (5.5 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- IK Multimedia iLoud MTM MKII vs IK Multimedia iLoud MTM
- IK Multimedia iLoud MTM MKII vs Presonus Eris E5 XT
- IK Multimedia iLoud MTM MKII vs KRK Rokit 5 G4
- IK Multimedia iLoud MTM MKII vs JBL 705P
- IK Multimedia iLoud MTM MKII vs Airpulse A100
- IK Multimedia iLoud MTM MKII vs KEF LS50 Wireless II
- IK Multimedia iLoud MTM MKII vs Kali Audio IN-5
- IK Multimedia iLoud MTM MKII vs Vanatoo Transparent Zero Plus
- See all 39 comparisons
Genelec 8320A: $850 each Bhphotovideo eBay
Pros: The Directivity Control Waveguide and die cast aluminum Minimum Diffraction Enclosure produce a listening window smoothness score of 0.53 and a low frequency alignment Q of just 0.227, the cleanest, least resonant bass rolloff of any speaker in this whole batch. It network calibrates through Genelec’s GLM software for automatic room correction, and Intelligent Signal Sensing drops standby power to under 0.5W.
Cons: On axis deviation measures 0.169dB average, decent but not class leading next to the AsciLab and Audio Smile entries in this batch. The compact 4.1 inch woofer limits low frequency extension to a measured 67.4Hz at -3dB, so a subwoofer is needed for full range use. The GLM calibration kit that unlocks its room correction features is sold separately from the speaker price, and max SPL tops out around 100dB, modest next to Genelec’s larger 8000 series monitors.
Full Genelec 8320A review and specifications →
| Bass Extension (-10dB) | 53.2Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 67.4Hz (measured, Audio Science Review) |
| Country | Finland |
| Dimensions | 9.5"H x 5.9"W x 5.6"D (242 x 151 x 142 mm) (9.5 x 5.9 x 5.6 in) |
| Drivers | 0.75" metal dome tweeter, 4.1" cone woofer |
| Enclosure | ported |
| Frequency Response | 55Hz-23kHz -6dB |
| Max SPL | Peak 107dB |
| Power Output (Watts) | 100W total (50W woofer, 50W tweeter, Class D) |
| Warranty | 2 years (5 with product registration) |
| Weight | 7.1 lbs / 3.2 kg (7.1 lbs) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons