HIFIMAN HE400se vs Sony MDR-7506

Last updated: October 11, 2026

Short answer: the HIFIMAN HE400se. It ranks #18 of 216 over-ear headphones by sound quality, rated 4.3/5, at $109; the Sony MDR-7506 ranks #56, rated 4.1/5, and costs $129.99, so there is not much of a tradeoff to weigh.

HIFIMAN HE400se vs Sony MDR-7506

The case for the HIFIMAN HE400se: A preference score of 89 and a neutral tilt make this an accurate sounding planar for the money. The catch: Sub-bass is about 5 dB light and bass from 60 to 200 Hz is about 1 dB under target, so low end impact is limited.

Why pick the Sony MDR-7506: A preference score of 83 with a deviation of only 1.7 dB from the Harman target in oratory1990’s measurement is excellent for a closed studio headphone. The tradeoff: Presence and treble run about 3.5 dB hot, with a peak of 6 dB near 4.5 kHz, which makes vocals forward and cymbals or sibilance sharp at higher volumes.

Buy the HIFIMAN HE400se. It is rated higher for sound quality than the Sony MDR-7506 and costs less, so it is the default pick unless a specific strength of the other one matters more to you.

Looking for alternatives? See the complete Headphones rankings.

Specifications Side By Side

HIFIMAN HE400se Sony MDR-7506
Price$109.00$129.99
Ranked#18 of 216 in Over-Ear Headphones#56 of 216 in Over-Ear Headphones
Form FactorOver-earOver-ear
Harman Preference Score89 (measured by oratory1990, via AutoEQ)83 (measured by oratory1990, via AutoEQ)
Deviation From Target1.98 dB standard deviation1.70 dB standard deviation
Tonal Tilt+0.05 (negative is warmer, positive brighter)+0.64 (negative is warmer, positive brighter)
Sub-bass ExtensionFalls 6 dB below target at 45 Hz (-7.3 dB at 30 Hz)Within 6 dB of target down to 20 Hz (-1.5 dB at 30 Hz)
ConnectionWiredWired
BackOpenClosed
Driver TypePlanar magneticDynamic
Drivers1 x planar magnetic1 x 40mm dynamic
Sensitivity91 dB/mW106 dB/mW
Weight0.9 lbs (396 g)0.6 lbs (260 g)
Frequency Response20Hz - 20kHz (Manufacturer specified)10Hz - 20kHz (Manufacturer specified)
Built-in Microphone-No

More worthwhile head-to-heads for HIFIMAN HE400se:

Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Headphones In Full

HIFIMAN HE400se: $109.00 Amazon eBay

HIFIMAN HE400se ranking card

Pros: A preference score of 89 and a neutral tilt make this an accurate sounding planar for the money. Treble is within a fraction of a dB of target and the air band is only 1 dB high, so the top end is smooth and free of sharp peaks, with the largest at about 2.4 dB near 11.9 kHz. It matches the rating of the Beyerdynamic DT 880 at a lower price, with a modest 396 g weight.

Cons: Sub-bass is about 5 dB light and bass from 60 to 200 Hz is about 1 dB under target, so low end impact is limited. The low mids are about 1.6 dB elevated while a 4.8 dB dip near 2 kHz and a 2 dB upper mid shortfall can push vocals slightly back. At 91 dB/mW sensitivity it benefits from a headphone amp, and the open back leaks sound and provides no isolation. See headphone amps and DACs with enough power to drive it.

ReleasedMar 2021 (5 years ago)
BackOpen
ConnectionWired
Deviation From Target1.98 dB standard deviation
Driver TypePlanar magnetic
Drivers1 x planar magnetic
Form FactorOver-ear
Frequency Response20Hz - 20kHz (Manufacturer specified)
Harman Preference Score89 (measured by oratory1990, via AutoEQ)
Sensitivity91 dB/mW
Sub-bass ExtensionFalls 6 dB below target at 45 Hz (-7.3 dB at 30 Hz)
Tonal Tilt+0.05 (negative is warmer, positive brighter)
Weight0.9 lbs (396 g)
EQ preset to match the Harman target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+6.7 dB0.70
Peak1,968 Hz+5.1 dB2.37
Peak861 Hz-2.3 dB1.86
Peak101 Hz-2.4 dB0.32
Peak1,619 Hz+1.1 dB3.53
High shelf10,000 Hz-2.6 dB0.70
Peak138 Hz+0.7 dB1.98
Peak64 Hz-0.7 dB1.95
Peak251 Hz-0.4 dB2.33
Peak29 Hz+0.5 dB2.63

Sony MDR-7506: $129.99 Amazon eBay

Sony MDR-7506 ranking card

Pros: A preference score of 83 with a deviation of only 1.7 dB from the Harman target in oratory1990’s measurement is excellent for a closed studio headphone. Bass and low mids sit within about 1 dB of target, so vocals and instruments sound natural and uncolored. At 260 g with a 106 dB/mW sensitivity, it plays loud straight from a phone or laptop without an amp.

Cons: Presence and treble run about 3.5 dB hot, with a peak of 6 dB near 4.5 kHz, which makes vocals forward and cymbals or sibilance sharp at higher volumes. Air above 10 kHz is about 2.6 dB low, and the wired-only design has no microphone.

BackClosed
Built-in MicrophoneNo
ConnectionWired
Deviation From Target1.70 dB standard deviation
Driver TypeDynamic
Drivers1 x 40mm dynamic
Form FactorOver-ear
Frequency Response10Hz - 20kHz (Manufacturer specified)
Harman Preference Score83 (measured by oratory1990, via AutoEQ)
Sensitivity106 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.5 dB at 30 Hz)
Tonal Tilt+0.64 (negative is warmer, positive brighter)
Weight0.6 lbs (260 g)
EQ preset to match the Harman target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+10.3 dB0.70
Peak5,435 Hz-3.8 dB0.90
Peak847 Hz+1.9 dB0.70
Peak230 Hz+3.7 dB2.08
Peak48 Hz-9.5 dB0.52
High shelf10,000 Hz+3.8 dB0.70
Peak7,530 Hz-1.4 dB3.26
Peak2,916 Hz-1.9 dB5.57
Peak3,748 Hz+2.6 dB5.91
Peak4,456 Hz-1.6 dB6.00