Short answer: pick the Morel Avyra 633 if you want sound quality that has been measured and ranked; the Focal Theva N°2 is unmeasured so far, so its case rests on features and price.

What the Focal Theva N°2 offers: A slim three-way bass reflex tower with a 1” aluminium-magnesium inverted dome tweeter, a 5” Slatefiber midrange and two 5” Slatefiber woofers.
What the Morel Avyra 633 brings: A 2.5-way floorstanding tower with two 6” mid-woofers (each with an unusually large 3” voice coil for better power handling) and a dome tweeter; the bottom woofer only covers up to about 250Hz while the top woofer runs all the way to the 2.2kHz crossover point.
On paper: The Morel Avyra 633 is rated down to 25Hz against 53Hz, though makers quote these at different tolerances. The Focal Theva N°2 is more sensitive, 90dB against 86.5dB, so it needs less amplifier power to play loud.
Price: the Focal Theva N°2 lists at $1,998 and the Morel Avyra 633 at $2,000.
Buy the Morel Avyra 633 if you want a speaker whose sound quality has been measured and ranked. It also has deeper rated bass.
Buy the Focal Theva N°2 if you want higher sensitivity, and you can wait for measurements to confirm how it sounds.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Focal Theva N°2 | Morel Avyra 633 | |
|---|---|---|
| Price | $1,998 per pair | $2,000.00 per pair |
| Ranked | - | #28 of 73 in Large Size Floorstanding Speakers |
| Drivers | 1” (25mm) Al/Mg inverted dome tweeter, 5” (13cm) Slatefiber midrange, 2x 5” (13cm) Slatefiber woofers | Dome tweeter, two 6” mid-woofers (3” voice coil) |
| Frequency Response | 53Hz-28kHz ±3dB (manufacturer specified) | 25Hz - 20kHz (±3dB, manufacturer specified) |
| Sensitivity | 90dB (manufacturer specified) | 86.5dB (measured, Erin’s Audio Corner) |
| Impedance | 8 ohms nominal, 2.9 ohms minimum (manufacturer specified) | 4 ohms nominal (3.8 ohms minimum, measured, Erin’s Audio Corner) |
| Recommended Power | 40-200W | 200-1000W |
| Woofer Cabinet | ported, rear | ported |
| Dimensions | 931H x 191W x 352D mm | 38.7”H x 12.8”W x 12.2”D (982 x 326 x 310 mm) |
| Weight | 17 kg each | 48.5 lbs (22 kg) each |
| Cabinet Color | light wood, black, dark wood | - |
| Country | France | Israel |
| Bass Extension (-10dB) | - | 32Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | - | 50Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | - | 250Hz, 2.2kHz |
| Spinorama Preference Score | - | 5.43 |
| Spinorama Preference Score with Perfect Sub | - | 7.20 |
| DIY Kit | - | No |
Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Focal Theva N°2: $1,998 per pair Amazon eBay
Older model: the Focal Chora 816 (rated 4.5/5).
Pros: A slim three-way bass reflex tower with a 1” aluminium-magnesium inverted dome tweeter, a 5” Slatefiber midrange and two 5” Slatefiber woofers. Focal rates it at 53Hz to 28kHz (±3dB) with a high 90dB sensitivity, so it gets loud from a small amplifier.
Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. Impedance drops to 2.9 ohms, a demanding load that calls for an amplifier comfortable with low impedances. Sold individually, so a pair costs twice the listed price.
Full Focal Theva N°2 review and specifications →
| Cabinet Color | light wood, black, dark wood |
|---|---|
| Country | France |
| Dimensions | 931H x 191W x 352D mm |
| Drivers | 1” (25mm) Al/Mg inverted dome tweeter, 5” (13cm) Slatefiber midrange, 2x 5” (13cm) Slatefiber woofers |
| Frequency Response | 53Hz-28kHz ±3dB (manufacturer specified) |
| Impedance | 8 ohms nominal, 2.9 ohms minimum (manufacturer specified) |
| Recommended Power | 40-200W |
| Sensitivity | 90dB (manufacturer specified) |
| Weight | 17 kg each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- These figures are manufacturer-specified rather than independently measured.
- Head-to-Head Comparisons
Morel Avyra 633: $2,000.00 per pair eBay
Pros: A 2.5-way floorstanding tower with two 6” mid-woofers (each with an unusually large 3” voice coil for better power handling) and a dome tweeter; the bottom woofer only covers up to about 250Hz while the top woofer runs all the way to the 2.2kHz crossover point. Easy to drive at a nominal 4 ohms (minimum 3.8 ohms). On-axis linearity measures within about ±2.25dB: genuinely impressive for a tower in this class, enough that the reviewer said he’d have guessed a $4,000-5,000 per pair price just from the look and the data alone. F3 of about 50Hz and F10 of about 32Hz give reasonable kick-drum-level bass without a subwoofer. Wide horizontal radiation around ±70° with good continuity outside the treble region. Harmonic distortion stays under 1% THD to about 100Hz at both 86dB and 96dB, and using an 80Hz subwoofer crossover barely changes midrange distortion: a sign the drive units themselves are good quality rather than excursion-limited. About 20dB of usable dynamic range. No through-holes for spikes, so no risk of dropped hardware during setup. Measured bass extension of 50Hz (-3dB), with a measured sensitivity of 86.5dB.
Cons: A bit bright out of the box: extra tweeter energy in the 4-7kHz region (which also shows up as nonlinearity in the early-reflections directivity data, making it harder to fully correct with EQ) reflects off nearby sidewalls and can sound tipped-up or edgy; a single EQ band (about 4.4kHz, -2dB, Q of 1) or absorption panels placed 60-80° off-axis on the sidewalls resolves it. Best aimed directly at the listener rather than toed out, since the top end already rolls off a little at wider angles. Imaging loses a bit of precision specifically in that lower-treble region. Multitone distortion exceeds the reviewer’s 3% comfort threshold at higher output. Real bass extension below 50Hz still needs a subwoofer. Not the same speaker as the Parts Express “Solstice” DIY kit despite surface similarities: different tweeter, different (ported vs. transmission line) enclosure, and measurably different woofers.
Full Morel Avyra 633 review and specifications →
| Bass Extension (-10dB) | 32Hz (measured, Erin’s Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 50Hz (measured, Erin’s Audio Corner) |
| Country | Israel |
| Crossover Frequency | 250Hz, 2.2kHz |
| DIY Kit | No |
| Dimensions | 38.7”H x 12.8”W x 12.2”D (982 x 326 x 310 mm) |
| Drivers | Dome tweeter, two 6” mid-woofers (3” voice coil) |
| Frequency Response | 25Hz - 20kHz (±3dB, manufacturer specified) |
| Impedance | 4 ohms nominal (3.8 ohms minimum, measured, Erin’s Audio Corner) |
| Recommended Power | 200-1000W |
| Sensitivity | 86.5dB (measured, Erin’s Audio Corner) |
| Spinorama Preference Score | 5.43 |
| Spinorama Preference Score with Perfect Sub | 7.20 |
| Weight | 48.5 lbs (22 kg) each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons

