Short answer: choose between the FBT Mitus 115A and Electro-Voice MFX-15MC for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.
The case for the FBT Mitus 115A. Medium-quality vendor data returns a 4.15 ideal-subwoofer preference score, continuing the Mitus 112A’s B&C neodymium woofer and rotatable horn design in a 15-inch cabinet aimed at premium main-speaker use.
The case for the Electro-Voice MFX-15MC. Medium-quality vendor data returns a 4.35 ideal-subwoofer preference score with 67Hz measured extension, the strongest result of any coaxial monitor in this ranking. The coaxial 15-inch design gives compact 60° x 40° coverage and a claimed 135dB peak with recommended amplification.
Important trade-offs. This is not self-powered: it requires an external amplifier and can run passive or externally bi-amplified, so it is less convenient than every conventional powered cabinet here. The narrow pattern is aimed primarily at stage-monitor and short-throw fill use rather than wide-audience main duty.
Buy the FBT Mitus 115A when its stated format, coverage, and system features fit the job better.
Buy the Electro-Voice MFX-15MC when its stated output, control, and deployment strengths better match the system.
Specifications Side By Side
| FBT Mitus 115A | Electro-Voice MFX-15MC | |
|---|---|---|
| Price | $3,400.00 | $3,170.67 |
| Ranked | #13 of 29 in 15-Inch Two-Way Powered PA Speakers | #15 of 29 in 15-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Passive or externally bi-amplified 2-way coaxial PA monitor |
| Drivers | 15" B&C neodymium woofer, compression driver | 15" coaxial LF/MF driver, 3" HF compression driver |
| Frequency Response | 46Hz - 20kHz (-6dB, manufacturer specified) | 52Hz - 18kHz (-3dB, manufacturer specified); 45Hz - 19kHz (-10dB) |
| Dimensions | 29.3"H x 16.7"W x 16.6"D (745 x 425 x 421 mm) | 23.6"H x 19.7"W x 13.3"D (600 x 500 x 339 mm) |
| Inputs | XLR input with link output | Neutrik NL4 input with NL4 pass-through |
| Amplifier Power | 900W RMS (600W LF + 300W HF, manufacturer specified) | Passive/bi-amp speaker; use external amplification within the 500W continuous / 3,500W peak handling rating |
| Crossover Frequency | 1.5kHz (manufacturer specified) | - |
| Cabinet Material | 15mm birch plywood | 12-18mm Baltic birch plywood with EVCoat finish |
| Rigging | Twelve M10 fly points; 35mm pole socket | Four M10 suspension points; integrated 35mm pole cup |
| Bass Extension (-3dB) | 92.5Hz (measured, vendor Spinorama data) | 75Hz (measured, vendor Spinorama data) |
| DSP | Yes | Requires external amplifier/DSP settings |
| Bluetooth | No | No |
| Power Handling | - | 500W continuous / 3,500W peak (manufacturer specified) |
| Coverage | - | 60° x 40°, rotatable |
| Maximum SPL | - | 135dB peak with recommended amplification |
| Weight | - | 50.7 lbs / 23 kg |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Axiom ED150A vs Yamaha DXR15mkIII
- RCF ART 935-A vs Yamaha DXR15mkIII
- RCF ART 715-A MK5 vs RCF NX 915-A
- Axiom ED150A vs FBT Mitus 115A
- Electro-Voice MFX-15MC vs RCF NX 915-A
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
FBT Mitus 115A: $3,400.00 eBay
Pros: Medium-quality vendor data returns a 4.15 ideal-subwoofer preference score, continuing the Mitus 112A’s B&C neodymium woofer and rotatable horn design in a 15-inch cabinet aimed at premium main-speaker use.
Cons: The measured bass extension (roughly 92Hz) is shallower than most 15-inch rivals here, and at a roughly $3,400 asking price it is one of the more expensive boxes in this ranking.
Full FBT Mitus 115A review and specifications →
| Amplifier Power | 900W RMS (600W LF + 300W HF, manufacturer specified) |
|---|---|
| Bass Extension (-3dB) | 92.5Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 15mm birch plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Crossover Frequency | 1.5kHz (manufacturer specified) |
| DSP | Yes |
| Dimensions | 29.3"H x 16.7"W x 16.6"D (745 x 425 x 421 mm) |
| Drivers | 15" B&C neodymium woofer, compression driver |
| Frequency Response | 46Hz - 20kHz (-6dB, manufacturer specified) |
| Inputs | XLR input with link output |
| Rigging | Twelve M10 fly points; 35mm pole socket |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Electro-Voice MFX-15MC: $3,170.67 Amazon B&H Photo Video eBay
Pros: Medium-quality vendor data returns a 4.35 ideal-subwoofer preference score with 67Hz measured extension, the strongest result of any coaxial monitor in this ranking. The coaxial 15-inch design gives compact 60° x 40° coverage and a claimed 135dB peak with recommended amplification.
Cons: This is not self-powered: it requires an external amplifier and can run passive or externally bi-amplified, so it is less convenient than every conventional powered cabinet here. The narrow pattern is aimed primarily at stage-monitor and short-throw fill use rather than wide-audience main duty.
Full Electro-Voice MFX-15MC review and specifications →
| Amplifier Power | Passive/bi-amp speaker; use external amplification within the 500W continuous / 3,500W peak handling rating |
|---|---|
| Bass Extension (-3dB) | 75Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 12-18mm Baltic birch plywood with EVCoat finish |
| Configuration | Passive or externally bi-amplified 2-way coaxial PA monitor |
| Coverage | 60° x 40°, rotatable |
| DSP | Requires external amplifier/DSP settings |
| Dimensions | 23.6"H x 19.7"W x 13.3"D (600 x 500 x 339 mm) |
| Drivers | 15" coaxial LF/MF driver, 3" HF compression driver |
| Frequency Response | 52Hz - 18kHz (-3dB, manufacturer specified); 45Hz - 19kHz (-10dB) |
| Inputs | Neutrik NL4 input with NL4 pass-through |
| Maximum SPL | 135dB peak with recommended amplification |
| Power Handling | 500W continuous / 3,500W peak (manufacturer specified) |
| Rigging | Four M10 suspension points; integrated 35mm pole cup |
| Weight | 50.7 lbs / 23 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons