Short answer: the EPZ G10. Both are rated 4.9/5 for sound quality (#10 and #9 of 297 in-ear headphones), and the EPZ G10 costs $23.74 against $49.99 for the EPZ G20, and with sound quality even, the cheaper one is the better buy.
Why pick the EPZ G10: Across 22 hobbyist measurements on squig.link, the G10 tracks the Harman target with only 1.11 dB of deviation and a preference score of 84.7, an exceptionally even result for a single dynamic driver at a budget price. The catch: The presence region around 3 to 6 kHz runs about 1.5 dB low, with a 3.6 dB dip near 6.3 kHz that slightly softens the edge of vocals and snare hits.
The case for the EPZ G20: The G20 is one of the most accurate inexpensive in-ears measured, with a preference score of 86 and under 1 dB of unevenness in the median of twelve hobbyist measurements on squig.link. The catch: A 6.3 dB peak near 11.9 kHz adds extra air that can make some recordings sound a little hissy or splashy.
Buy the EPZ G10. Both are rated the same for sound quality, and it costs $26.25 less than the EPZ G20.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| EPZ G10 | EPZ G20 | |
|---|---|---|
| Price | $23.74 | $49.99 |
| Ranked | #10 of 297 in In-Ear Headphones | #9 of 297 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 85 (median of 22 squig.link measurements, calibrated to AutoEQ) | 86 (median of 12 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.11 dB standard deviation | 0.99 dB standard deviation |
| Tonal Tilt | +0.08 (negative is warmer, positive brighter) | +0.10 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic |
| Impedance | 32 ohms | - |
| Sensitivity | 100 dB | 100 dB |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | - | Yes |
Related Headphone Comparisons
More worthwhile head-to-heads for EPZ G20:
- EPZ G20 vs EPZ G30
- EPZ G10 vs EPZ G30
- Truthear x Crinacle Zero RED vs 7Hz Salnotes Zero
- Truthear x Crinacle Zero RED vs Tin HiFi T3 Plus
- Truthear x Crinacle Zero RED vs Tin HiFi T4
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
EPZ G10: $23.74 Amazon eBay
Pros: Across 22 hobbyist measurements on squig.link, the G10 tracks the Harman target with only 1.11 dB of deviation and a preference score of 84.7, an exceptionally even result for a single dynamic driver at a budget price. Bass, low mids and upper mids all land within half a decibel of target, so vocals sound natural and bass lines are full without bloat. Sub-bass holds within 1.2 dB of target at 30 Hz, and the 32 ohm, 100 dB sensitivity rating plays comfortably from a phone. It shares its rating with the pricier EPZ Q1 Pro and Intuaura Reference 2019.
Cons: The presence region around 3 to 6 kHz runs about 1.5 dB low, with a 3.6 dB dip near 6.3 kHz that slightly softens the edge of vocals and snare hits. A 4.6 dB peak near 11.9 kHz adds a touch of sparkle that treble sensitive listeners may notice on bright recordings. It is a plain wired set with no microphone or wireless option listed.
Full EPZ G10 review and specifications →
| Released | 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.11 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 85 (median of 22 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 100 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz) |
| Tonal Tilt | +0.08 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
EPZ G20: $49.99 Amazon eBay
Pros: The G20 is one of the most accurate inexpensive in-ears measured, with a preference score of 86 and under 1 dB of unevenness in the median of twelve hobbyist measurements on squig.link. Bass, midrange and lower treble all land within about 1 dB of target, and sub-bass stays full down to 20 Hz. It matches the rating of the costlier Truthear Zero Blue 2 and includes an inline microphone.
Cons: A 6.3 dB peak near 11.9 kHz adds extra air that can make some recordings sound a little hissy or splashy. The EPZ Q1 Pro earns the same rating for a bit less money, and the 100 dB sensitivity figure is unremarkable, though still fine for a phone.
Full EPZ G20 review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 0.99 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 86 (median of 12 squig.link measurements, calibrated to AutoEQ) |
| Sensitivity | 100 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.7 dB at 30 Hz) |
| Tonal Tilt | +0.10 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons