Emotiva Airmotiv XT2 vs Emotiva Airmotiv T2+

Last updated: September 29, 2026

Short answer: the Emotiva Airmotiv XT2 is the newer model that replaces the Emotiva Airmotiv T2+, but only the Emotiva Airmotiv T2+ has been measured and ranked so far, so this comparison is on specs and features rather than sound. The Emotiva Airmotiv T2+ is discontinued, so it is now a used buy.

Emotiva Airmotiv XT2 vs Emotiva Airmotiv T2+

The case for the Emotiva Airmotiv XT2: A three-way tower with a 25mm x 32mm Airmotiv folded ribbon tweeter, a 5.25” woven fiber midrange in its own sub-enclosure, and three 6” long-throw woofers, crossed at 430Hz and 3.1kHz.

On the Emotiva Airmotiv T2+ side: High-value three-way tower with strong output and unusually deep usable sealed-room bass for the price.

Buy the Emotiva Airmotiv T2+ if you want a speaker whose sound quality has been measured and ranked.

Buy the Emotiva Airmotiv XT2 if you want the newer model, and you can wait for measurements to confirm how it sounds.

Want more options? Browse the full Passive Home rankings.

Specifications Side By Side

Emotiva Airmotiv XT2 Emotiva Airmotiv T2+
Price$999 per pair Discontinued$999 per pair Discontinued
Ranked-#35 of 73 in Large Size Floorstanding Speakers
Crossover Frequency430Hz, 3.1kHz-
Dimensions1137H x 216W x 311D mm42.7”H x 12.2”W x 12.3”D
DIY KitNoNo
Drivers25mm x 32mm folded ribbon tweeter, 5.25” woven fiber midrange, 3x 6” woven fiber woofers32mm folded-ribbon tweeter; 5.25” midrange; dual 8” woofers
Frequency Response40Hz - 27kHz ±3dB (Manufacturer specified)-
Impedance4 ohmsApproximately 3 ohms minimum near 100Hz (measured, Erin’s Audio Corner)
Recommended Power100W or more-
Sensitivity90dB (2.83V/1m, manufacturer specified)Approximately 89.5dB/2.83V/1m (measured, Erin’s Audio Corner)
Weight22.2 kg each56.9 lbs (25.8 kg) each
Woofer Cabinetported, rearported, rear
Bass Extension (-3dB)-62Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)-32Hz (measured, Erin’s Audio Corner)
Spinorama Preference Score-5.56
Spinorama Preference Score with Perfect Sub-7.14

Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Emotiva Airmotiv XT2: $999 per pair Discontinued Emotiva eBay

Emotiva Airmotiv XT2 ranking card

Older model: the Emotiva Airmotiv T2+ (rated 4.2/5).

Pros: A three-way tower with a 25mm x 32mm Airmotiv folded ribbon tweeter, a 5.25” woven fiber midrange in its own sub-enclosure, and three 6” long-throw woofers, crossed at 430Hz and 3.1kHz. Emotiva rates it at 40Hz to 27kHz (±3dB) and 90dB (2.83V/1m) efficiency. A 31mm braced baffle, rear port, bi-amp terminals, outrigger feet with spikes, magnetic grilles and a five year warranty.

Cons: No independent measurements have been published yet, so it can’t be compared with the Airmotiv T2+ it replaces, which Erin measured reaching about 32Hz (-10dB) from two 8” woofers. The XT2 swaps those for three 6” woofers. Its 4 ohm load calls for an amplifier of 100W or more that is comfortable with 4 ohms. It weighs 22kg per speaker, and it is sold mainly direct from Emotiva, where it currently shows sold out. Discontinued.

Crossover Frequency430Hz, 3.1kHz
DIY KitNo
Dimensions1137H x 216W x 311D mm
Drivers25mm x 32mm folded ribbon tweeter, 5.25” woven fiber midrange, 3x 6” woven fiber woofers
Frequency Response40Hz - 27kHz ±3dB (Manufacturer specified)
Impedance4 ohms
Recommended Power100W or more
Sensitivity90dB (2.83V/1m, manufacturer specified)
Weight22.2 kg each
Woofer Cabinetported, rear

Emotiva Airmotiv T2+: $999 per pair Discontinued Emotiva eBay

Emotiva Airmotiv T2+ ranking card

Newer model: the Emotiva Airmotiv XT2. It’s likely to perform similarly, though we don’t have measurements to confirm that yet.

Pros: High-value three-way tower with strong output and unusually deep usable sealed-room bass for the price. Erin measured F3 at 62Hz and F10 at 32Hz, with sensitivity just under 90dB/2.83V/1m. Dual 8-inch woven-fiber woofers relieve the 5.25-inch midrange, and the 32mm folded-ribbon tweeter provides broad horizontal coverage. Approximately +/-2.5dB response linearity, solid cabinet bracing and low compression allow substantial playback levels; the gradual low-frequency roll-off integrates well with either room gain or a subwoofer. Measured bass extension of 62Hz (-3dB), with a measured sensitivity of 89.5dB.

Cons: The nominal 4-ohm system approaches 3 ohms near 100Hz in Erin’s measurement, so a high-current amplifier is preferable. Horizontal and especially vertical directivity through the midrange/tweeter transition is less uniform than the best waveguided or coaxial designs; listener height and nearby reflections matter, and EQ cannot correct the narrowing mismatch. The large rear-ported cabinet needs placement clearance, and its deep F10 should not be confused with flat 30Hz output at cinema levels. Discontinued.

Bass Extension (-10dB)32Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)62Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions42.7”H x 12.2”W x 12.3”D
Drivers32mm folded-ribbon tweeter; 5.25” midrange; dual 8” woofers
ImpedanceApproximately 3 ohms minimum near 100Hz (measured, Erin’s Audio Corner)
SensitivityApproximately 89.5dB/2.83V/1m (measured, Erin’s Audio Corner)
Spinorama Preference Score5.56
Spinorama Preference Score with Perfect Sub7.14
Weight56.9 lbs (25.8 kg) each
Woofer Cabinetported, rear