Short answer: the Revel M105 for better sound quality, the ELAC Uni-Fi 2.0 UB52 for the lower price. The Revel M105 ranks #12 of 74 bookshelf speakers at $1500. The ELAC Uni-Fi 2.0 UB52 ranks #55 at $599, $901 cheaper.
What the ELAC Uni-Fi 2.0 UB52 offers: Wide, smooth horizontal directivity - beamwidth holds to about ±60 degrees up to 8kHz before narrowing. Vertical directivity is substantially better than average, giving more listening-height leeway than most two-way bookshelf speakers. Watch for: Dipped 3db from 1.5-3khz. On-axis response shelves down above 1.5kHz along with multiple resonances, leading the reviewer to predict it will “likely sound dull.” Nasty resonance at 600hz - audible as an actual buzzing artifact on some recordings (the reviewer demonstrated it with an Eva Cassidy track), and it shows up as a sharp distortion spike exceeding 4% at 585Hz when driven to 96dB SPL/1m. Not recommended.
What the Revel M105 offers: CEA2034 spinorama shows an essentially flat on-axis response with only a small 5kHz peak, a smooth listening window, and clean waterfall decay. Wide horizontal dispersion gives flexibility with toe-in. The reviewer called it reference-quality performance with minor EQ correction applied. Watch for: Low nominal impedance demands a capable amplifier that can handle low-impedance loads. Bass distortion runs high in the 80-250Hz range from woofer displacement, and maximum output is limited compared to larger designs.
Buy the ELAC Uni-Fi 2.0 UB52 if the price matters more than sound quality. Buy the Revel M105 if sound quality matters more than the price.

Specifications Side By Side
| ELAC Uni-Fi 2.0 UB52 | Revel M105 | |
|---|---|---|
| Price | $599.00 | $1500 Discontinued |
| Ranked | #55 of 74 in Medium Size Bookshelf Speakers | #12 of 74 in Medium Size Bookshelf Speakers |
| Crossover Frequency | 200Hz / 2000Hz | - |
| Dimensions | 13.6"H x 7.3"W x 10.8"D (346 x 185 x 275 mm) | 14"H x 7.9"W x 9.8"D (355.6 x 200.7 x 248.9 mm) |
| Impedance | 6 ohms | 8 ohms nominal, low minimum |
| Sensitivity | 83.3dB (measured by Audio Science Review; 85dB manufacturer specified) | 85dB (2.83V/1m, measured, Audio Science Review) |
| Drivers | 5.25" aluminum woofer, 4" aluminum midrange, 1" soft dome tweeter | 5.25" aluminum cone woofer, 1" aluminum tweeter with acoustic lens waveguide |
| Power Handling | 140W max | - |
| Woofer Cabinet | ported | ported, rear |
| Weight | 7.7 lbs / 3.5 kg | 15.4 lbs / 7 kg each |
| Bass Extension (-3dB) | 55.7Hz (measured, Audio Science Review) | 75Hz (measured, Audio Science Review) |
| Bass Extension (-10dB) | 38.6Hz (measured, Audio Science Review) | 58Hz (measured, Audio Science Review) |
| Discontinued | - | Yes |
| Frequency Response | - | 60Hz - 44kHz (+/-3dB) (Manufacturer specified) |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Arendal 1961 Monitor vs Moondrop M4P MTM
- KEF LS50 Meta vs KEF Q100
- Dynaudio X14 vs KEF Q100
- Revel M105 vs Wharfedale Diamond 12.1
- Dynaudio X14 vs ELAC Uni-Fi 2.0 UB52
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
ELAC Uni-Fi 2.0 UB52: $599.00 Amazon eBay
Pros: Wide, smooth horizontal directivity - beamwidth holds to about ±60 degrees up to 8kHz before narrowing. Vertical directivity is substantially better than average, giving more listening-height leeway than most two-way bookshelf speakers.
Cons: Dipped 3db from 1.5-3khz. On-axis response shelves down above 1.5kHz along with multiple resonances, leading the reviewer to predict it will “likely sound dull.” Nasty resonance at 600hz - audible as an actual buzzing artifact on some recordings (the reviewer demonstrated it with an Eva Cassidy track), and it shows up as a sharp distortion spike exceeding 4% at 585Hz when driven to 96dB SPL/1m. Not recommended.
Full ELAC Uni-Fi 2.0 UB52 review and specifications →
| Bass Extension (-10dB) | 38.6Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 55.7Hz (measured, Audio Science Review) |
| Crossover Frequency | 200Hz / 2000Hz |
| Dimensions | 13.6"H x 7.3"W x 10.8"D (346 x 185 x 275 mm) |
| Drivers | 5.25" aluminum woofer, 4" aluminum midrange, 1" soft dome tweeter |
| Impedance | 6 ohms |
| Power Handling | 140W max |
| Sensitivity | 83.3dB (measured by Audio Science Review; 85dB manufacturer specified) |
| Weight | 7.7 lbs / 3.5 kg |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- ELAC Uni-Fi 2.0 UB52 vs KEF Q100
- ELAC Uni-Fi 2.0 UB52 vs JBL Stage A120
- ELAC Uni-Fi 2.0 UB52 vs Q Acoustics 3020i
- ELAC Uni-Fi 2.0 UB52 vs JBL L52 Classic
- ELAC Uni-Fi 2.0 UB52 vs Pioneer SP-BS22-LR (Philharmonic AAM Mod)
- ELAC Uni-Fi 2.0 UB52 vs Micca RB42
- ELAC Uni-Fi 2.0 UB52 vs Q Acoustics 5020
- ELAC Uni-Fi 2.0 UB52 vs Dynaudio X14
- See all 36 comparisons
Revel M105: $1500 Discontinued eBay
Pros: CEA2034 spinorama shows an essentially flat on-axis response with only a small 5kHz peak, a smooth listening window, and clean waterfall decay. Wide horizontal dispersion gives flexibility with toe-in. The reviewer called it reference-quality performance with minor EQ correction applied.
Cons: Low nominal impedance demands a capable amplifier that can handle low-impedance loads. Bass distortion runs high in the 80-250Hz range from woofer displacement, and maximum output is limited compared to larger designs. Discontinued.
Full Revel M105 review and specifications →
| Bass Extension (-10dB) | 58Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 75Hz (measured, Audio Science Review) |
| Dimensions | 14"H x 7.9"W x 9.8"D (355.6 x 200.7 x 248.9 mm) |
| Discontinued | Yes |
| Drivers | 5.25" aluminum cone woofer, 1" aluminum tweeter with acoustic lens waveguide |
| Frequency Response | 60Hz - 44kHz (+/-3dB) (Manufacturer specified) |
| Impedance | 8 ohms nominal, low minimum |
| Sensitivity | 85dB (2.83V/1m, measured, Audio Science Review) |
| Weight | 15.4 lbs / 7 kg each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons

