Short answer: the Dynaudio Emit 30. It ranks #43 of 56 floorstanding speakers by sound quality at $1274.25; the Magnepan LRS+ ranks #50 and costs $1300, so there is not much of a tradeoff to weigh.
What the Dynaudio Emit 30 gets right: A 2.5-way floorstander: two 5.25” mid-woofers paired with a roughly 1” dome tweeter, driven through dual rear bass-reflex ports. The catch: A dip and inconsistency in the lower-treble presence region (roughly 2-5kHz) makes the top end sound uneven - sometimes soft, sometimes forward - depending on the specific instrument or frequency being reproduced.
What the Magnepan LRS+ offers: Thin, two-way planar-magnetic open-baffle/dipole panel design (about 48” tall, just 1” deep). Watch for: Extremely current-hungry and power-hungry: even a pair of 600W Macintosh monoblock amplifiers only averaged about 90dB output - a robust, high-power amplifier is essentially mandatory, and budget amps won’t cut it.
Buy the Dynaudio Emit 30. It ranks higher for sound quality than the Magnepan LRS+ and costs less, so there is no real case for the other one.
If sound quality matters at all to you, skip both of these and look higher up the 56 floorstanding speakers instead.
Specifications Side By Side
| Dynaudio Emit 30 | Magnepan LRS+ | |
|---|---|---|
| Price | $1,274.25 | $1300 |
| Ranked | #43 of 56 in Large Size Floorstanding Speakers | #50 of 56 in Large Size Floorstanding Speakers |
| Bass Extension (-10dB) | 36Hz (measured, Erin’s Audio Corner) | 67Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 44Hz (measured, Erin’s Audio Corner) | 74Hz (measured, Erin’s Audio Corner) |
| Drivers | Dual 5.25" mid-woofers, 1" soft dome tweeter | Full-range planar magnetic dipole panel (48" tall x 13.5" wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections |
| Weight | 34.2 lbs / 15.5 kg | 30 lbs / 13.6 kg |
| Sensitivity | 87dB | 85.1dB (measured, Erin’s Audio Corner) |
| Impedance | 4 ohms | 4 ohms nominal, 3 ohms minimum (measured, Erin’s Audio Corner) |
| Dimensions | 35.4"H x 6.7"W x 10.7"D (900.0 x 170.0 x 272.0 mm) | 48"H x 13.5"W x 1"D (1219.2 x 342.9 x 25.4 mm) |
| Woofer Cabinet | ported, rear (dual) | open baffle |
| Frequency Response | 44Hz - 25kHz (±3dB, manufacturer specified) | - |
| Power Handling | 180W (IEC rated) | - |
| Country of Origin | Denmark | - |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- JBL Stage 2 280F vs JBL Studio 590
- Klipsch RP-5000F II vs Klipsch RP-6000F II
- Infinity Primus 360 vs Klipsch RP-8000F II
- Magnepan LRS+ vs Bose 901 Series V
- KEF Q11 Meta vs Dynaudio Emit 30
The Two Speakers In Full
Dynaudio Emit 30: $1,274.25 Amazon
Pros: A 2.5-way floorstander: two 5.25” mid-woofers paired with a roughly 1” dome tweeter, driven through dual rear bass-reflex ports. The two woofers hand off at staggered crossover points (around 1kHz and 3.5kHz) rather than sharing one, which avoids the acoustic lobing a shared crossover point would cause between the tweeter and the lower woofer, and adds a few dB of sensitivity in the process. Genuinely deep bass for a speaker around this price - measured F3 near 44Hz and extends audibly down to about 40Hz in-room without much difficulty. Harmonic distortion measures clean and low at both 86dB and 96dB SPL/1m. Good CTA-2034 sound power and uniform directivity mean the speaker takes EQ correction well if a listener wants to dial in its one tonal weak point. Dynamic range and compression performance are strong overall, with only a minor, high-Q compression artifact tied to a cone-edge resonance that’s unlikely to be audible. Wide, consistent horizontal dispersion around ±70° with just a small ~10° narrowing between 1-3kHz, and a reasonably forgiving ±20° vertical window centered on the tweeter axis.
Cons: A dip and inconsistency in the lower-treble presence region (roughly 2-5kHz) makes the top end sound uneven - sometimes soft, sometimes forward - depending on the specific instrument or frequency being reproduced; male vocals can lack presence and cymbals can lack sizzle as a result. A cone-edge surround resonance shows up around 1-1.3kHz in burst-decay measurements (a trait the reviewer has also seen on other Dynaudio models) and lines up with elevated multitone distortion across roughly 600Hz-1.5kHz. An enclosure resonance appears around 350Hz in the impedance curve. Placed too close to a rear wall, the dual ports make the bass noticeably boomy - pulling the speaker out is needed to keep the low end from overloading the room. Fully resolving the top-end inconsistency needs a modest EQ correction (roughly +2dB with a Q of about 1, centered 3-6kHz), so out-of-the-box tonal accuracy in that band isn’t quite class-leading despite otherwise strong measured performance.
Full Dynaudio Emit 30 review and specifications →
| Bass Extension (-10dB) | 36Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 44Hz (measured, Erin's Audio Corner) |
| Country of Origin | Denmark |
| Dimensions | 35.4"H x 6.7"W x 10.7"D (900.0 x 170.0 x 272.0 mm) |
| Drivers | Dual 5.25" mid-woofers, 1" soft dome tweeter |
| Frequency Response | 44Hz - 25kHz (±3dB, manufacturer specified) |
| Impedance | 4 ohms |
| Power Handling | 180W (IEC rated) |
| Sensitivity | 87dB |
| Weight | 34.2 lbs / 15.5 kg |
| Woofer Cabinet | ported, rear (dual) |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Dynaudio Emit 30 vs Klipsch RP-6000F II
- Dynaudio Emit 30 vs Klipsch RP-8000F II
- Dynaudio Emit 30 vs Polk T50
- Dynaudio Emit 30 vs Focal Aria Evo X N°2
- Dynaudio Emit 30 vs Sony SS-CS3
- Dynaudio Emit 30 vs SVS Ultra Evolution Pinnacle
- Dynaudio Emit 30 vs Klipsch RP-5000F II
- Dynaudio Emit 30 vs Infinity Reference 253
- See all 12 comparisons
Magnepan LRS+: $1300 Magnepan
Pros: Thin, two-way planar-magnetic open-baffle/dipole panel design (about 48” tall, just 1” deep). Delivers a uniquely dramatic and enveloping soundstage with genuinely three-dimensional depth effects that work across all music genres, not just classical or orchestral material as commonly assumed. Extremely tight, locked-in center-phantom imaging when set up correctly. Open-baffle design avoids the “boxy” enclosure coloration of conventional cabinet speakers. Multitone distortion is remarkably consistent from low to high frequency, a characteristic the reviewer hasn’t observed in conventional cone-and-dome speakers. Compression at high output stays modest (about 0.5-1dB) through the midrange and treble, giving roughly 20-26dB of usable dynamic range in that region. At its price, a strong contender for a dedicated secondary listening room, even if not a main-system replacement.
Cons: Extremely current-hungry and power-hungry: even a pair of 600W Macintosh monoblock amplifiers only averaged about 90dB output - a robust, high-power amplifier is essentially mandatory, and budget amps won’t cut it. Bass rolls off very quickly (F3 74Hz, F10 67Hz, described as falling off “like a rock”), making a subwoofer an absolute requirement for any low-end content. A roughly 3dB dip in the mid-bass (100-300Hz) region thins out vocal body and fullness compared to a conventional bookshelf speaker. A resonance/bump around 400Hz adds a mild boxy quality, though it responds well to about 2dB of EQ correction. Extraordinarily fussy about exact positioning - both seating height (must align with the acoustic reference point between the panel’s lower tie-down points) and horizontal aiming are unusually critical; moving just a couple of inches can cause treble content above roughly 500-600Hz to nearly vanish. Distinct off-axis cancellation zones exist directly to the sides of the panel, where very little sound is audible at all. Fails badly under extreme dynamic-transient testing in the bass, and the reviewer blew fuses pushing the speaker during testing - not built for high-volume or highly dynamic playback. A genuinely different category from conventional hi-fi speakers, requiring more setup patience and experimentation than a typical monopole design.
Full Magnepan LRS+ review and specifications →
| Bass Extension (-10dB) | 67Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 74Hz (measured, Erin's Audio Corner) |
| Dimensions | 48"H x 13.5"W x 1"D (1219.2 x 342.9 x 25.4 mm) |
| Drivers | Full-range planar magnetic dipole panel (48" tall x 13.5" wide); quasi-ribbon design, two-way with separate mid/bass and tweeter ribbon sections |
| Impedance | 4 ohms nominal, 3 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 85.1dB (measured, Erin's Audio Corner) |
| Weight | 30 lbs / 13.6 kg |
| Woofer Cabinet | open baffle |
As an eBay Partner, we may be compensated if you make a purchase.
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Magnepan LRS+ vs JBL Stage 2 280F
- Magnepan LRS+ vs Infinity Reference 253
- Magnepan LRS+ vs Sony SS-CS3
- Magnepan LRS+ vs JBL Studio 590
- Magnepan LRS+ vs Focal Aria Evo X N°2
- Magnepan LRS+ vs Triangle Esprit Antal Ez
- Magnepan LRS+ vs Polk T50
- Magnepan LRS+ vs Klipsch RP-6000F II
- See all 16 comparisons