Definitive Technology BP-9020 vs Revel F328Be

Last updated: October 1, 2026

Short answer: the Revel F328Be. It ranks #9 of 188 floorstanding speakers by sound quality (rated 4.7/5) at $19,359.90 and is still sold new; the Definitive Technology BP-9020 ranks #124 (rated 3.8/5) and is discontinued, so it is only an option used.

Definitive Technology BP-9020 vs Revel F328Be

The Definitive Technology BP-9020 is the deeper-bass pick. Integrated powered 8” side-firing subwoofer with a 150-watt Class D amplifier provides exceptional sub-bass extension down to an F3 of 35Hz and F10 of 29Hz without requiring a standalone subwoofer enclosure. Its bass reaches about 35Hz before falling 3dB, against 74Hz for the Revel F328Be. Watch for: Significant high-frequency boost creates notable treble brightness and noticeable sibilance on vocal s-sounds.

The Revel F328Be is the more accurate pick. CEA2034 spinorama shows a quite flat on-axis response with superb directivity and efficiency above 90dB. Its measured preference score, a predictor of how neutral it sounds, is 6.40 against 5.08 for the Definitive Technology BP-9020. The catch: Vertical directivity is asymmetric: the reviewer recommends staying between -20 and +40 degrees relative to the tweeter axis, reflecting the driver layout of this three-way tower.

Buy the Revel F328Be. It is rated higher for sound quality; the Definitive Technology BP-9020 is no longer sold new.

Still deciding? The full Passive Home rankings cover every ranked option.

Specifications Side By Side

Definitive Technology BP-9020 Revel F328Be
Price$500 per pair Discontinued$19,359.90 per pair
Ranked#124 of 188 in Large Size Floorstanding Speakers#9 of 188 in Large Size Floorstanding Speakers
Bass Extension (-10dB)29Hz (measured, Erin’s Audio Corner)39Hz (measured, Audio Science Review)
Bass Extension (-3dB)35Hz (measured, Erin’s Audio Corner)74Hz (measured, Audio Science Review)
Dimensions35.3”H x 11”W x 13”D (895.4 x 279.4 x 330.2 mm)50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm)
Impedance8 ohms nominal8 ohms nominal (3 ohms minimum, measured by Audio Science Review)
Sensitivity87.7dB (measured average, Erin’s Audio Corner)91dB (measured, Audio Science Review)
Drivers1 in. annealed aluminum dome tweeter, two 3.5 in. BDSS midrange (front), one 3.5 in. BDSS midrange (rear), 8 in. powered subwooferThree 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter
Weight30 lbs (13.6 kg) each112.4 lbs (51 kg) each
Woofer Cabinetported, slotported, rear
Spinorama Preference Score5.086.40
Spinorama Preference Score with Perfect Sub6.537.81
DIY KitNoNo

How Revel F328Be compares with other leading options:

Prices on this page were last checked October 9, 2026 at 8:01 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Definitive Technology BP-9020: $500 per pair Discontinued eBay

Definitive Technology BP-9020 ranking card

Pros: Integrated powered 8” side-firing subwoofer with a 150-watt Class D amplifier provides exceptional sub-bass extension down to an F3 of 35Hz and F10 of 29Hz without requiring a standalone subwoofer enclosure. Forward-Focused Bipolar Array technology (dual 3.5” front midrange drivers + 1” annealed aluminum dome tweeter, plus a 3.5” rear-firing midrange driver) creates a remarkably wide, spacious soundstage with broad room envelopment. On-axis frequency response stays smooth and relatively neutral when listened to directly aligned with the tweeter. Measured average sensitivity of 87.7dB SPL (2.83V/1m) allows comfortable drive from standard multi-channel receivers. Measured bass extension of 35Hz (-3dB), with a measured sensitivity of 87.7dB.

Cons: Significant high-frequency boost creates notable treble brightness and noticeable sibilance on vocal s-sounds. Bipolar rear driver radiation creates a diffuse soundstage that compromises razor-sharp imaging focus and pinpoint instrument placement. DSP-based internal limiter aggressively compresses output below 80Hz at higher listening levels, causing lower mid-bass and sub-bass impact to diminish as volume increases. Midrange clarity shows slight ‘cuppiness’ and upper-frequency directivity irregularities due to front/rear driver interaction. Discontinued.

Bass Extension (-10dB)29Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)35Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions35.3”H x 11”W x 13”D (895.4 x 279.4 x 330.2 mm)
Drivers1 in. annealed aluminum dome tweeter, two 3.5 in. BDSS midrange (front), one 3.5 in. BDSS midrange (rear), 8 in. powered subwoofer
Impedance8 ohms nominal
Sensitivity87.7dB (measured average, Erin’s Audio Corner)
Spinorama Preference Score5.08
Spinorama Preference Score with Perfect Sub6.53
Weight30 lbs (13.6 kg) each
Woofer Cabinetported, slot

Revel F328Be: $19,359.90 per pair Crutchfield eBay

Revel F328Be ranking card

Same family: the Revel M126Be (bookshelf, rated 4.3/5), the Revel F226Be (smaller floorstanding, ranked lower, rated 4.6/5), the Revel F228Be (smaller floorstanding, ranked lower, rated 4.5/5) and the Revel C426Be (center, rated 4/5).

Pros: CEA2034 spinorama shows a quite flat on-axis response with superb directivity and efficiency above 90dB. Predicted in-room response is extremely accurate, with a smooth ~5dB downward slope from bass to treble that suits typical rooms without correction. Early reflections sum very nicely with the direct sound. Horizontal beamwidth of about ±70 degrees is wide and quite smooth. At 96dB SPL/1m distortion stays easily below the reviewer’s audibility threshold across nearly the whole range. Measured bass extension of 74Hz (-3dB), with a measured sensitivity of 91dB.

Cons: Vertical directivity is asymmetric: the reviewer recommends staying between -20 and +40 degrees relative to the tweeter axis, reflecting the driver layout of this three-way tower. Impedance dips to a minimum of 3 ohms with an additional resonance-driven phase swing, calling for an amplifier comfortable with a demanding load. Very expensive and very heavy (51 kg each).

Bass Extension (-10dB)39Hz (measured, Audio Science Review)
Bass Extension (-3dB)74Hz (measured, Audio Science Review)
DIY KitNo
Dimensions50.9”H x 13.5”W x 17.6”D (1292.9 x 342.9 x 447 mm)
DriversThree 8” (200mm) Deep Ceramic Composite aluminum cones, with cast frames woofer, 5-1/4” (130mm) Deep Ceramic Composite aluminum cone, with cast frame midrange, 1” (25mm) Beryllium dome, with acoustic lens waveguide tweeter
Impedance8 ohms nominal (3 ohms minimum, measured by Audio Science Review)
Sensitivity91dB (measured, Audio Science Review)
Spinorama Preference Score6.40
Spinorama Preference Score with Perfect Sub7.81
Weight112.4 lbs (51 kg) each
Woofer Cabinetported, rear