Danley SH50 vs Triad In-Room Gold LCR

Short answer: the Danley SH50. It ranks #37 of 84 bookshelf speakers by sound quality; the Triad In-Room Gold LCR ranks #77.

What the Danley SH50 offers: A true point-source-style professional loudspeaker: two 12-inch woofers, four 5-inch midranges and a compression driver share one Synergy horn, preserving approximately 50° x 50° constant directivity through most of the passband. Watch for: This 133-pound, roughly 28-inch cube is engineered for venues and large rooms, not conventional domestic nearfield listening.

What the Triad In-Room Gold LCR offers: Built for serious home theater output: the sealed three-way layout uses dual 8.5-inch woofers, a 5.5-inch midrange and a 1-inch fabric dome. Watch for: At $6,600/pair, Erin found the raw response and value hard to defend without EQ: a 100-300Hz dip makes male vocals thin, a 1kHz dip adds hollowness, and a 4-5kHz rise makes sibilants harsh.

Buy the Danley SH50 if sound quality matters more than the price. Buy the Triad In-Room Gold LCR if the price matters more than sound quality.

If sound quality matters at all to you, skip the Triad In-Room Gold LCR. It ranks near the bottom of the 84 bookshelf speakers, so look higher up the list instead.

Specifications Side By Side

Related Speaker Comparisons

More useful head-to-heads from the same speaker class:

• JBL HDI-1600 vs Aperion Audio Verus V8B
• Ascend Acoustics Sierra-LX vs Aperion Audio Verus V8B
• Sonus Faber Lumina II Amator vs Aperion Audio Verus V8B
• Wharfedale Diamond 9.1 vs Triad In-Room Gold LCR
• Danley SH50 vs Dynaudio Contour 20i

The Two Speakers In Full

Danley SH50: Contact dealer Danley Dealer Contact

Pros: A true point-source-style professional loudspeaker: two 12-inch woofers, four 5-inch midranges and a compression driver share one Synergy horn, preserving approximately 50° x 50° constant directivity through most of the passband. Erin measured roughly 97dB/2.83V/1m sensitivity, an F3 near 60Hz and extraordinary output. Distortion stayed below 1% above about 60Hz at 86dB, and compression remained negligible above roughly 70Hz even at 102dB. Broad response trends can be corrected with DSP without destroying the controlled radiation pattern.

Cons: This 133-pound, roughly 28-inch cube is engineered for venues and large rooms, not conventional domestic nearfield listening. Its narrow 50° coverage demands precise aiming and provides a small sweet area close up. Erin measured impedance just below 4 ohms near 100Hz and 1kHz; the high sensitivity eases voltage demand, but professional use still warrants a robust dedicated amplifier and DSP. A resonance/second-harmonic distortion feature around 900Hz and smaller nonminimum-phase response features cannot be fully equalized. Subwoofers remain appropriate below the approximately 60Hz measured F3.

Full Danley SH50 review and specifications →

Bass Extension (-3dB)	Approximately 60Hz (measured, Erin's Audio Corner)
Coverage	50° horizontal x 50° vertical
Dimensions	28"H x 28"W x 25.5"D
Drivers	Two 12" woofers; four 5" midranges; 1" compression driver in Synergy horn
Impedance	Just under 4 ohms near 100Hz and 1kHz (measured, Erin's Audio Corner)
Max SPL	127dB continuous, 133dB peak (manufacturer specified)
Sensitivity	Approximately 97dB/2.83V/1m (measured, Erin's Audio Corner)
Weight	133 lb each

As an eBay Partner, we may be compensated if you make a purchase.

• Links
  • Official Danley SH50 Page
• Reviews, Comparisons and Sound Samples
  • Erin’s Audio Corner: Danley SH50 Review
  • Erin’s Audio Corner Website: Danley SH50
  • Reddit Search for Danley SH50 Review
• Head-to-Head Comparisons
  • Danley SH50 vs Dynaudio Contour 20i
  • Danley SH50 vs Buchardt Audio S400

Triad In-Room Gold LCR: $6,600 per pair Triad Authorized Dealer

Pros: Built for serious home theater output: the sealed three-way layout uses dual 8.5-inch woofers, a 5.5-inch midrange and a 1-inch fabric dome. At 86dB/1m, Erin measured under 1% distortion to 50Hz; at 96dB it remained under 1% only above about 80Hz, supporting Triad’s intended 80Hz subwoofer crossover. Compression and 32-band multitone distortion were both low, even at high playback levels. Broad horizontal coverage (about +/-70 to 80 degrees through the midrange) and a roughly +/-20-degree vertical window give a generous listening area. It can be made substantially more linear with EQ, and its 89dB measured sensitivity is suitable for a capable AVR or power amplifier.

Cons: At $6,600/pair, Erin found the raw response and value hard to defend without EQ: a 100-300Hz dip makes male vocals thin, a 1kHz dip adds hollowness, and a 4-5kHz rise makes sibilants harsh. The directivity begins to narrow above about 5kHz as the tweeter beams. Despite its dual woofers, it requires a subwoofer; Erin measured F3 57Hz and F10 40Hz. Load dips below 3 ohms, so it needs an amplifier stable into 4 ohms. Plain, utilitarian styling will not suit everyone.

Full Triad In-Room Gold LCR review and specifications →

Bass Extension (-10dB)	40Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)	57Hz (measured, Erin's Audio Corner)
Country of Origin	USA (handcrafted, manufacturer specified)
Dimensions	29"H x 10.75"W x 11.375"D
Drivers	Two 8.5" metal woofers, 5.5" paper/fiber midrange, 1" fabric-dome tweeter
Frequency Response	50Hz - 20kHz +/-3dB (manufacturer specified)
Impedance	4 ohms nominal; dips below 3 ohms (measured, Erin's Audio Corner)
Power Handling	100W - 450W recommended (manufacturer specified)
Sensitivity	88.9dB (2.83V/1m, measured, Erin's Audio Corner; 92dB manufacturer specified)
Weight	55 lbs (54.9 lbs / 24.9kg) each
Woofer Cabinet	sealed / acoustic suspension

As an eBay Partner, we may be compensated if you make a purchase.

• Links
  • Official Triad In-Room Gold LCR Product Page
• Reviews, Comparisons and Sound Samples
  • Erin’s Audio Corner: Triad Gold In-Room LCR Review
  • Erin’s Audio Corner Website: Triad In-Room Gold LCR
  • Reddit Search for Triad In-Room Gold LCR Review
• Head-to-Head Comparisons
  • Triad In-Room Gold LCR vs ATC SCM19
  • Triad In-Room Gold LCR vs Wharfedale Diamond 9.1