Short answer: the Campfire Audio Dorado 2020, though neither ranks well in its class. It ranks #446 of 450 in-ear headphones by sound quality, rated 1.3/5, at $699. The Westone Pro X50 ranks #450, rated 1.0/5, at $609.96, $89.04 cheaper, not enough of a saving to outweigh the sound-quality gap. Both are rated below 3.0/5 among the 450 in-ear headphones, so if sound quality matters, consider the Truthear Nova instead, ranked #2 at $169.99.
The Campfire Audio Dorado 2020 is the better-sounding pick. Bass runs 6.6 dB above the Harman target from 60 to 200 Hz and sub-bass holds within 6 dB of target down to 20 Hz, so bass lovers get a big, rumbling low end. The catch: In oratory1990’s measurement a 7.5 dB dip near 3.8 kHz and a presence region 4.5 dB below target push vocals and guitars back behind the bass, for a preference score of only 40.
The case for the Westone Pro X50: Five balanced armatures with 115 dB/mW sensitivity make it easy to drive from a phone or stage monitor pack. The tradeoff: Its preference score of 11 from crinacle’s measurement is among the lowest of any in-ear, with 6.39 dB of deviation and a strongly dark tilt, so its tonal balance is far from what most listeners prefer.
Buy the Campfire Audio Dorado 2020. It is rated higher for sound quality, and the $89.04 saving on the Westone Pro X50 is not enough to make up the difference.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| Campfire Audio Dorado 2020 | Westone Pro X50 | |
|---|---|---|
| Price | $699.00 | $609.96 |
| Ranked | #446 of 450 in In-Ear Headphones | #450 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 40 (measured by oratory1990, via AutoEQ) | 11 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 4.28 dB standard deviation | 6.39 dB standard deviation |
| Tonal Tilt | -1.50 (negative is warmer, positive brighter) | -2.11 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz) | - |
| Connection | Wired | Wired |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) | Balanced armature |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature | 5 x balanced armature |
| Impedance | 10 ohms | 45 ohms |
| Sensitivity | 94 dB | 115 dB/mW |
| Frequency Response | 5Hz - 22kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
Related Headphone Comparisons
More worthwhile head-to-heads for Campfire Audio Dorado 2020:
- FiiO FA7S vs Campfire Audio Dorado 2020
- Campfire Audio Dorado 2020 vs Final Audio F3100
- Final Audio F3100 vs Westone Pro X50
- EarSonics ES2 vs Westone Pro X50
- EarSonics ES2 vs Final Audio F3100
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Campfire Audio Dorado 2020: $699.00 Amazon eBay
Pros: Bass runs 6.6 dB above the Harman target from 60 to 200 Hz and sub-bass holds within 6 dB of target down to 20 Hz, so bass lovers get a big, rumbling low end. The hybrid layout pairs a 10 mm dynamic driver with a balanced armature, and it rates above the Final Audio F3100 and the Westone Pro X50.
Cons: In oratory1990’s measurement a 7.5 dB dip near 3.8 kHz and a presence region 4.5 dB below target push vocals and guitars back behind the bass, for a preference score of only 40. The 94 dB sensitivity is low for an in-ear, so it needs more volume than most from a phone. The Audio-Technica ATH-E70 and the Mackie MP-360 both rate higher and cost less.
Full Campfire Audio Dorado 2020 review and specifications →
| Released | 2020 (6 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 4.28 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) |
| Drivers | 1 x 10mm dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 22kHz (Manufacturer specified) |
| Harman Preference Score | 40 (measured by oratory1990, via AutoEQ) |
| Impedance | 10 ohms |
| Sensitivity | 94 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz) |
| Tonal Tilt | -1.50 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.8 dB | 0.70 |
| Peak | 178 Hz | -6.4 dB | 0.65 |
| Peak | 3,644 Hz | +5.6 dB | 1.30 |
| Peak | 804 Hz | +4.2 dB | 2.36 |
| Peak | 2,270 Hz | +4.1 dB | 3.22 |
| High shelf | 10,000 Hz | +1.2 dB | 0.70 |
| Peak | 1,332 Hz | -3.1 dB | 4.46 |
| Peak | 6,130 Hz | +3.1 dB | 6.00 |
| Peak | 5,091 Hz | -2.4 dB | 6.00 |
| Peak | 1,031 Hz | +1.6 dB | 4.46 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Westone Pro X50: $609.96 Amazon eBay
Pros: Five balanced armatures with 115 dB/mW sensitivity make it easy to drive from a phone or stage monitor pack. The closed in-ear design isolates well from loud surroundings.
Cons: Its preference score of 11 from crinacle’s measurement is among the lowest of any in-ear, with 6.39 dB of deviation and a strongly dark tilt, so its tonal balance is far from what most listeners prefer. The Mackie MP-360 and Audio-Technica ATH-E70 earn higher ratings for less money.
Full Westone Pro X50 review and specifications →
| Released | 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 6.39 dB standard deviation |
| Driver Type | Balanced armature |
| Drivers | 5 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 11 (measured by crinacle, via AutoEQ) |
| Impedance | 45 ohms |
| Sensitivity | 115 dB/mW |
| Tonal Tilt | -2.11 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.5 dB | 0.70 |
| Peak | 221 Hz | -8.1 dB | 0.40 |
| Peak | 2,016 Hz | +7.5 dB | 0.67 |
| Peak | 9,337 Hz | +5.4 dB | 0.36 |
| Peak | 1,719 Hz | -9.7 dB | 1.82 |
| High shelf | 10,000 Hz | -6.4 dB | 0.70 |
| Peak | 9,549 Hz | +2.7 dB | 1.77 |
| Peak | 2,260 Hz | +1.0 dB | 2.61 |
| Peak | 1,810 Hz | +0.1 dB | 6.00 |
| Peak | 2,047 Hz | -1.8 dB | 5.70 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons