Short answer: the Buchardt Audio E50 for better sound quality, the AsciLab F6Bs for the lower price. The Buchardt Audio E50 ranks #16 of 130 bookshelf speakers at $4600. The AsciLab F6Bs ranks #20 at $799, $3801 cheaper.
What the AsciLab F6Bs offers: A slimmer, sealed, VESA 100 wall mountable variant of AsciLab’s F6B, trading the F6B’s passive radiator for a shallower 15.4cm deep cabinet that can go straight on a wall bracket. The sound power directivity index has the tightest standard deviation, 3.32, of anything in this batch of new additions, meaning off axis energy tracks the on axis response unusually consistently for a sealed 2-way this size, and on axis deviation measures a clean 0.25dB average. Watch for: AsciLab’s own site shows the F6Bs sold out, though it remains in stock through resellers like Audiophonics and Tested Audio. Bass extension is measured at 82.0Hz at -3dB, noticeably less than the passive radiator equipped F6B, and listening window smoothness measures only a moderate 0.39. The 4 ohm nominal impedance calls for a reasonably capable amplifier.
What the Buchardt Audio E50 offers: Exceptional bass extension for a bookshelf - F3 at 40Hz, F10 at 34Hz - with genuinely low-end weight the reviewer kept noticing track after track, not just a single room-boosted note. Mid and lower-midrange are very neutral with no coloration and well-executed baffle-step compensation, so it doesn’t need to sit close to a wall like many bookshelf designs. Low distortion throughout the midrange, controlled ~60-degree horizontal directivity, and a striking driver/waveguide integration that looks genuinely upscale. Watch for: A roughly 3dB dip in the upper midrange/lower treble softens attack and dialogue clarity - the reviewer’s main complaint, and it’s baked into the crossover rather than a directivity artifact, so it’s audible both on and off axis. Sounds too bright pointed directly at the listener; needs about 10-20 degrees of toe-out to tame the treble and slightly smooth (not eliminate) that dip. Below-average sensitivity (measured 83.1dB vs 85dB spec) calls for a beefier amp, and the speaker’s tonal balance is unusually sensitive to amplifier output impedance - a poor tube amp can shift the midrange by up to 2dB.
Buy the AsciLab F6Bs if the price is the priority over sound quality, or the Buchardt Audio E50 if sound quality is the priority over the price.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| AsciLab F6Bs | Buchardt Audio E50 | |
|---|---|---|
| Price | €799 per pair | $4600 per pair |
| Ranked | #20 of 130 in Large Size Bookshelf Speakers | #16 of 130 in Large Size Bookshelf Speakers |
| Enclosure | sealed | - |
| Drivers | 1" aluminum dome tweeter with waveguide and phase plug, 6" fiber cone woofer | 1" Scanspeak dome tweeter with waveguide, 6.5" Purifi extended-stroke woofer, dual 6.5" passive radiators |
| Dimensions | 14.5"H x 8"W x 6.1"D (368 x 203 x 154 mm) | 15.6" x 7.5" x 11.2" (395 x 190 x 284 mm) |
| Weight | 12.3 lbs (5.6 kg) each | 19 lbs (8.6 kg) each |
| Sensitivity | 85.2dB @ 2.83V/1m (measured, Audio Science Review) | 83.1dB (2.83V/1m, measured by Erin's Audio Corner) |
| Impedance | 4 ohms nominal, 3.7 ohms minimum | 4 ohms nominal |
| Bass Extension (-3dB) | 82.0Hz (measured, Audio Science Review) | 40Hz (measured, Erin's Audio Corner) |
| Bass Extension (-10dB) | 50.1Hz (measured, Audio Science Review) | 34Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 1kHz | 2000Hz |
| Mounting | VESA 100 wall mount compatible | - |
| Warranty | 2 years | - |
| Country | South Korea | Denmark |
| Maximum SPL | 100dB full bandwidth, 102dB above 100Hz (manufacturer specified) | - |
| Spinorama Preference Score | 4.35 | 5.03 |
| Spinorama Preference Score with Perfect Sub | 7.01 | 6.80 |
| Woofer Cabinet | - | Passive radiator loaded |
| Frequency Response | - | 36Hz - 30kHz ±3dB (Manufacturer specified) |
| Recommended Power | - | 60W - 200W |
Related Speaker Comparisons
How Buchardt Audio E50 compares with other leading options:
- Buchardt Audio E50 vs Perlisten S4b
- KEF Reference 1 Meta vs Buchardt Audio E50
- Buchardt Audio E50 vs GR-Research NX-Studio
- March Audio Sointuva vs Buchardt Audio E50
- AsciLab C6B vs Buchardt Audio E50
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
AsciLab F6Bs: €799 per pair Audiophonics eBay
Pros: A slimmer, sealed, VESA 100 wall mountable variant of AsciLab’s F6B, trading the F6B’s passive radiator for a shallower 15.4cm deep cabinet that can go straight on a wall bracket. The sound power directivity index has the tightest standard deviation, 3.32, of anything in this batch of new additions, meaning off axis energy tracks the on axis response unusually consistently for a sealed 2-way this size, and on axis deviation measures a clean 0.25dB average. Measured bass extension of 82.0Hz (-3dB), with a measured sensitivity of 85.2dB.
Cons: AsciLab’s own site shows the F6Bs sold out, though it remains in stock through resellers like Audiophonics and Tested Audio. Bass extension is measured at 82.0Hz at -3dB, noticeably less than the passive radiator equipped F6B, and listening window smoothness measures only a moderate 0.39. The 4 ohm nominal impedance calls for a reasonably capable amplifier.
Full AsciLab F6Bs review and specifications →
| Bass Extension (-10dB) | 50.1Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 82.0Hz (measured, Audio Science Review) |
| Country | South Korea |
| Crossover Frequency | 1kHz |
| Dimensions | 14.5"H x 8"W x 6.1"D (368 x 203 x 154 mm) |
| Drivers | 1" aluminum dome tweeter with waveguide and phase plug, 6" fiber cone woofer |
| Enclosure | sealed |
| Impedance | 4 ohms nominal, 3.7 ohms minimum |
| Maximum SPL | 100dB full bandwidth, 102dB above 100Hz (manufacturer specified) |
| Mounting | VESA 100 wall mount compatible |
| Sensitivity | 85.2dB @ 2.83V/1m (measured, Audio Science Review) |
| Spinorama Preference Score | 4.35 |
| Spinorama Preference Score with Perfect Sub | 7.01 |
| Warranty | 2 years |
| Weight | 12.3 lbs (5.6 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- AsciLab F6Bs vs Epos ES14N
- AsciLab F6Bs vs Arendal 1528 Monitor 8
- AsciLab F6Bs vs MoFi SourcePoint 8
- AsciLab F6Bs vs Ascend Acoustics CMT-340 SE2
- AsciLab F6Bs vs Wharfedale Super Linton
- AsciLab F6Bs vs KEF R3
- AsciLab F6Bs vs MoFi SourcePoint 10
- AsciLab F6Bs vs Wharfedale Aura 2
- See all 45 comparisons
Buchardt Audio E50: $4600 per pair Buchardt Audio eBay
Pros: Exceptional bass extension for a bookshelf - F3 at 40Hz, F10 at 34Hz - with genuinely low-end weight the reviewer kept noticing track after track, not just a single room-boosted note. Mid and lower-midrange are very neutral with no coloration and well-executed baffle-step compensation, so it doesn’t need to sit close to a wall like many bookshelf designs. Low distortion throughout the midrange, controlled ~60-degree horizontal directivity, and a striking driver/waveguide integration that looks genuinely upscale. Measured bass extension of 40Hz (-3dB), with a measured sensitivity of 83.1dB.
Cons: A roughly 3dB dip in the upper midrange/lower treble softens attack and dialogue clarity - the reviewer’s main complaint, and it’s baked into the crossover rather than a directivity artifact, so it’s audible both on and off axis. Sounds too bright pointed directly at the listener; needs about 10-20 degrees of toe-out to tame the treble and slightly smooth (not eliminate) that dip. Below-average sensitivity (measured 83.1dB vs 85dB spec) calls for a beefier amp, and the speaker’s tonal balance is unusually sensitive to amplifier output impedance - a poor tube amp can shift the midrange by up to 2dB.
Full Buchardt Audio E50 review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 40Hz (measured, Erin's Audio Corner) |
| Country | Denmark |
| Crossover Frequency | 2000Hz |
| Dimensions | 15.6" x 7.5" x 11.2" (395 x 190 x 284 mm) |
| Drivers | 1" Scanspeak dome tweeter with waveguide, 6.5" Purifi extended-stroke woofer, dual 6.5" passive radiators |
| Frequency Response | 36Hz - 30kHz ±3dB (Manufacturer specified) |
| Impedance | 4 ohms nominal |
| Recommended Power | 60W - 200W |
| Sensitivity | 83.1dB (2.83V/1m, measured by Erin's Audio Corner) |
| Spinorama Preference Score | 5.03 |
| Spinorama Preference Score with Perfect Sub | 6.80 |
| Weight | 19 lbs (8.6 kg) each |
| Woofer Cabinet | Passive radiator loaded |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Buchardt Audio E50 vs KEF R3
- Buchardt Audio E50 vs MoFi SourcePoint 8
- Buchardt Audio E50 vs Wharfedale Aura 2
- Buchardt Audio E50 vs KEF Q Concerto Meta
- Buchardt Audio E50 vs Arendal 1528 Monitor 8
- Buchardt Audio E50 vs KEF R3 Meta
- Buchardt Audio E50 vs Ascend Acoustics CMT-340 SE2
- Buchardt Audio E50 vs Wharfedale Super Linton
- See all 45 comparisons