Short answer: the ARTTI T10 Pro. Both are rated 3.3/5 for sound quality (#907 and #920 of 1291 in-ear headphones), and the ARTTI T10 Pro costs $109 against $126.43 for the Creative Aurvana Ace 2, with sound quality a draw, the lower price decides it.
What the ARTTI T10 Pro does well: Bass is lifted about 3 dB with extension to 20 Hz, giving kick drums and bass lines extra weight. The catch: Presence sits about 4 dB low with a 4.9 dB dip near 6.3 kHz, so vocals and instruments lose some bite.
The case for the Creative Aurvana Ace 2: True wireless earbuds with ANC, IPX5 water resistance and an unusually wide codec list, including aptX Lossless, aptX Adaptive, AAC and LC3, so they get the best connection from most Android phones. The catch: Squig.link hobbyist measurements put its preference score at 65, with bass and low mids running about 2 dB thick while an 8.9 dB peak near 7.9 kHz makes cymbals and sibilance sharp and splashy.
Buy the ARTTI T10 Pro. Both are rated the same for sound quality, and it costs $17.43 less than the Creative Aurvana Ace 2.
Looking for alternatives? See the complete Headphones rankings.
Bass is lifted about 3 dB with extension to 20 Hz, giving kick drums and bass lines extra weight.
Amazon $109.00 eBay
True wireless earbuds with ANC, IPX5 water resistance and an unusually wide codec list, including aptX Lossless, aptX Adaptive, AAC and LC3, so they get the best connection from most Android phones.
Amazon $126.43 eBayPrices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| ARTTI T10 Pro | Creative Aurvana Ace 2 | |
|---|---|---|
| Price | $109.00 | $126.43 |
| Ranked | #907 of 1291 in In-Ear Headphones | #920 of 1291 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Connection | Wired | True wireless |
| Driver Type | Planar | Hybrid (1 dynamic + 1 xMEMS solid-state) |
| Drivers | 1 x 14.2mm planar magnetic | 1 x 10mm dynamic + 1 x xMEMS solid-state |
| Impedance | 16.5 ohms | - |
| Sensitivity | 96 dB/mW | - |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) | 5Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 65 (median of 16 squig.link measurements, calibrated to AutoEQ) | 65 (median of 7 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 2.36 dB standard deviation | 2.44 dB standard deviation |
| Tonal Tilt | -1.02 (negative is warmer, positive brighter) | -0.70 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+1.0 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.3 dB at 30 Hz) |
| Weight | - | 0 lbs (4.7 g) per earbud |
| Active Noise Cancelling | - | Yes |
| Battery Life | - | 6 hours (24 with case, Manufacturer specified) |
| Bluetooth Version | - | 5.3 |
| Bluetooth Codecs | - | SBC, AAC, aptX, aptX Adaptive, aptX Lossless, LC3 |
| Built-in Microphone | - | Yes |
| IP Rating | - | IPX5 |
Frequency Response Compared
Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.
Measurement data: the ARTTI T10 Pro from aftersound, atechreviews, audioamigo, banzai1122, boizoff, enemyspider, flare, jaytiss, koi, practiphile, pw, sl0the, soundcheck39, soundignity, tdl, tonedeafmonk and vortexreviews; the Creative Aurvana Ace 2 from aden, dhrme, kazi, listener, obodio, regancipher, therollo9 and vsg, all via squig.link.
Related Headphone Comparisons
How ARTTI T10 Pro compares with other leading options: