Artpical Blue Planet vs Tin HiFi P2 Ultra

Last updated: October 17, 2026

Short answer: the Artpical Blue Planet. Both are rated 3.5/5 for sound quality (#839 and #797 of 1291 in-ear headphones), and the Artpical Blue Planet costs $570 against $599 for the Tin HiFi P2 Ultra, with sound quality a draw, the lower price decides it.

Artpical Blue Planet vs Tin HiFi P2 Ultra

The case for the Artpical Blue Planet: A 12mm planar IEM with treble right on the Harman target and full sub-bass to 20 Hz, scoring 67 across four measurements. The catch: A 2.45 dB spread from the target shows peaks and dips that better tuned sets avoid.

Why pick the Tin HiFi P2 Ultra: A 12mm planar IEM in a gold plated shell with bass right on the Harman target, scoring 68 across five measurements. Watch for: Treble sits about 4.7 dB below target, a dark, relaxed balance.

Buy the Artpical Blue Planet. Both are rated the same for sound quality, and it costs $29 less than the Tin HiFi P2 Ultra.

Still deciding? The full Headphones rankings cover every ranked option.

Artpical Blue Planet

A 12mm planar IEM with treble right on the Harman target and full sub-bass to 20 Hz, scoring 67 across four measurements.

e-earphone (JP) eBay
$570
Tin HiFi P2 Ultra

A 12mm planar IEM in a gold plated shell with bass right on the Harman target, scoring 68 across five measurements.

Amazon $599.00 eBay
$599

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Specifications Side By Side

Artpical Blue Planet Tin HiFi P2 Ultra
Price$570$599.00
Ranked#839 of 1291 in In-Ear Headphones#797 of 1291 in In-Ear Headphones
Form FactorIn-earIn-ear
BackClosedClosed
ConnectionWiredWired
Driver TypePlanar MagneticPlanar Magnetic
Drivers1 x 12mm planar magnetic1 x 12mm planar
Impedance16 ohms32 ohms
Sensitivity98 dB/mW @ 1kHz98 dB
Harman Preference Score67 (median of 4 squig.link measurements, calibrated to AutoEQ)68 (median of 5 squig.link measurements, calibrated to AutoEQ)
Deviation From Target2.45 dB standard deviation2.47 dB standard deviation
Tonal Tilt-0.47 (negative is warmer, positive brighter)-0.51 (negative is warmer, positive brighter)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+1.3 dB at 30 Hz)Within 6 dB of target down to 20 Hz (-2.5 dB at 30 Hz)

Frequency Response Compared

Both headphones’ measurements overlaid on the Harman target. Above the target sounds louder in that range, below it quieter. Each curve is the median of several independent measurements, shifted so its 500 Hz to 2 kHz average sits at 0 dB, so only the tuning is compared.

Artpical Blue PlanetTin HiFi P2 UltraHarman target
Frequency response of the Artpical Blue Planet and Tin HiFi P2 Ultra-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: the Artpical Blue Planet from aftersound, dchpgall, hu-fi and soundignity; the Tin HiFi P2 Ultra from atechreviews, audioamigo, csi-zone, ducbloke and soundignity, all via squig.link.

More top alternatives to Tin HiFi P2 Ultra: