Coverage note. Speaker Ranking currently covers 5 Amate Audio models across pa speakers. These are the products in our database, not a complete list of everything Amate Audio makes.
What this page covers. The Amate Audio models ranked here span pa speakers, including Amate Audio X14FD, Amate Audio X102FD and Amate Audio X82FD. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 5 Amate Audio speakers ranked on this site across pa speakers. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Quick Navigation
8-Inch PA Speakers
Ranked #26 of 47 in 8-Inch PA Speakers - Amate Audio X82FD eBay
Same family: the Amate Audio X10FD (smaller model, estimated 3.6/5), the Amate Audio X102FD (larger model, rated 3.6/5) and the Amate Audio X14FD (larger model, rated 3.6/5).
Pros: A self-powered model from Amate’s Xcellence range alongside the measured Amate Audio X102FD and Amate Audio X14FD: two 8” woofers and a 3” compression driver driven by 3,000W, for long throws from a narrow cabinet. Amate rates it at 137dB peak with 80° x 60° coverage, and it has Dante networking and touchscreen DSP control.
Cons: No independent measurements yet, so it can’t be compared with ranked PA speakers. Amate sells through dealers, so there is no retail price. Bass stops around 68Hz (-10dB), so it needs a subwoofer for full-range music.
Full Amate Audio X82FD review and specifications →
| Amplifier Power | 3,000W (2,500W LF, 500W HF), Class D bi-amplified |
|---|---|
| Bluetooth | No |
| Configuration | Active 2-way PA speaker |
| Coverage | 80° x 60° |
| DSP | Yes |
| Drivers | 2x 8” neodymium woofers, 3” diaphragm compression driver |
| Frequency Response | 68Hz - 19kHz (-10dB) (manufacturer specified) |
| Maximum SPL | 137dB peak (manufacturer specified) |
| Network Control | Dante |
| Passive | No |
| Rigging | M8 rigging points; RB-S flying bar; wall bracket |
| Weight | 50.7 lbs (23 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
10-Inch PA Speakers
Ranked #23 of 42 in 10-Inch PA Speakers - Amate Audio X102FD eBay
Same family: the Amate Audio X10FD (smaller model, ranked lower, estimated 3.6/5), the Amate Audio X82FD (smaller model, estimated 3.5/5) and the Amate Audio X14FD (larger model, rated 3.6/5).
Pros: Two 10-inch neodymium woofers and a 3-inch-diaphragm compression driver on a rotatable horn, driven by 3000W of built-in amplification, reach 136dB continuous and 139dB peak. Manufacturer measurements give a 5.08 preference score with an ideal subwoofer, and the Active+ platform adds Dante networking over two Ethernet ports. Measured bass extension of 90Hz (-3dB).
Cons: Bass measures 90Hz at -3dB, and a 3.9dB reference band with 0.642 listening-window deviation means tonal balance is uneven, with a 2.34 standalone score. It weighs 28kg and is sold only through pro dealers with no published price.
Full Amate Audio X102FD review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 2,500W LF + 500W HF, Class-D bi-amplified |
| Aux Input | No |
| Bass Extension (-10dB) | about 57.3Hz (measured, vendor Spinorama data) |
| Bass Extension (-3dB) | 90Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Coaxial Input | No |
| Configuration | Active 2-way point-source PA speaker |
| Coverage | 80° x 60° (rotatable horn) |
| DSP | Yes, Active+ platform |
| Dimensions | 27.7”H x 13”W x 18.1”D (704 x 330 x 460 mm) |
| Drivers | 2x 10” neodymium woofers, 3” titanium-diaphragm neodymium compression driver |
| Frequency Response | 58Hz - 19kHz (-10dB, manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Maximum SPL | 136dB continuous / 139dB peak (manufacturer specified) |
| Microphone Input | No |
| Network Control | Active+ with Dante networking and DSPLink control |
| Optical Input | No |
| Passive | No |
| RCA Input | No |
| Rigging | M8 rigging points; RB-L flying bar; wall bracket |
| Spinorama Preference Score | 2.34 |
| Spinorama Preference Score with Perfect Sub | 5.08 |
| TRS Input | No |
| USB Input | No |
| Weight | 61.7 lbs (28 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #28 of 42 in 10-Inch PA Speakers - Amate Audio X10FD eBay
Same family: the Amate Audio X82FD (larger model, estimated 3.5/5), the Amate Audio X102FD (larger model, ranked higher, rated 3.6/5) and the Amate Audio X14FD (larger model, rated 3.6/5).
Pros: A self-powered model from Amate’s Xcellence range alongside the measured Amate Audio X102FD and Amate Audio X14FD: the most compact Xcellence point source, a 10” model with adjustable 50° to 100° horizontal coverage. Amate rates it at 131dB peak / 128dB continuous with 50° to 100° x 55° coverage, and it has Dante networking and touchscreen DSP control.
Cons: No independent measurements yet, so it can’t be compared with ranked PA speakers. Amate sells through dealers, so there is no retail price.
Full Amate Audio X10FD review and specifications →
| Amplifier Power | 1,000W (800W LF, 200W HF), Class D bi-amplified |
|---|---|
| Bluetooth | No |
| Configuration | Active 2-way PA speaker |
| Coverage | 50° to 100° x 55° |
| DSP | Yes |
| Drivers | 10” neodymium woofer, 1.7” diaphragm compression driver |
| Frequency Response | 53Hz - 19kHz (manufacturer specified) |
| Maximum SPL | 131dB peak / 128dB continuous (manufacturer specified) |
| Network Control | Dante |
| Passive | No |
| Rigging | M8 rigging points; RB-S flying bar; wall bracket |
| Weight | 41.9 lbs (19 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
15-Inch PA Speakers
Ranked #32 of 75 in 15-Inch PA Speakers - Amate Audio X14FD eBay
Same family: the Amate Audio X10FD (smaller model, estimated 3.6/5), the Amate Audio X82FD (smaller model, estimated 3.5/5) and the Amate Audio X102FD (smaller model, rated 3.6/5).
Pros: A 14-inch coaxial design that reaches 65Hz at -3dB and about 55Hz at -10dB, with a 2.4dB reference band that keeps the midrange and treble fairly even. Manufacturer measurements give a 5.04 preference score with an ideal subwoofer, and 1500W of bi-amplification reaches 132dB peak. Its trapezoidal cabinet can be flown, pole-mounted or laid on its side as a stage monitor. Measured bass extension of 65Hz (-3dB).
Cons: A 0.687 listening-window deviation means tonal balance is less even than the best 15-inch picks, and the standalone score is 2.38. It is sold only through pro dealers with no published price.
Full Amate Audio X14FD review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 1,000W LF + 500W HF, Class-D bi-amplified |
| Aux Input | No |
| Bass Extension (-10dB) | about 55Hz (measured, vendor Spinorama data) |
| Bass Extension (-3dB) | 65Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Coaxial Input | No |
| Configuration | Active 2-way coaxial PA speaker |
| DSP | Yes, Active+ platform |
| Dimensions | 24.5”H x 15.8”W x 16.9”D (623 x 402 x 430 mm) |
| Drivers | 14” neodymium woofer with coaxial 3” titanium-diaphragm compression driver |
| Frequency Response | 48Hz - 20kHz (-10dB, manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Maximum SPL | 129dB continuous / 132dB peak (manufacturer specified) |
| Microphone Input | No |
| Optical Input | No |
| Passive | No |
| RCA Input | No |
| Rigging | M8 rigging points; fly, stack or pole mount |
| Spinorama Preference Score | 2.38 |
| Spinorama Preference Score with Perfect Sub | 5.04 |
| TRS Input | No |
| USB Input | No |
| Weight | 52 lbs (23.6 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Discontinued Amate Audio Models
Still ranked, and often still worth buying used, but no longer in production. Check availability before planning around one of these.
12-Inch PA Speakers
Ranked #60 of 83 in 12-Inch PA Speakers - Amate Audio X12CLA: $4,150 Discontinued eBay
Pros: Its medium-quality vendor Spinorama data yields a 4.07 ideal-subwoofer preference score and 58Hz bass extension. The 100° x 15° constant-curvature pattern, 132dB claimed peak output and networked DSP suit tightly controlled flown clusters. Measured bass extension of 71Hz (-3dB).
Cons: The very narrow 15° vertical pattern is specialized rather than broadly useful as a single portable main, and the 31.5kg enclosure is the heaviest cabinet near this part of the ranking. It is discontinued and expensive, while the measured tonal score trails the stronger point-source options.
Full Amate Audio X12CLA review and specifications →
| AES Input | No |
|---|---|
| Amplifier Power | 1,500W program (1,000W LF + 500W HF, manufacturer specified) |
| Aux Input | No |
| Bass Extension (-3dB) | 71Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Multilayer birch plywood with weatherproof polyurea finish |
| Coaxial Input | No |
| Configuration | Active 2-way constant-curvature PA speaker |
| Coverage | 100° x 15° |
| DSP | Yes, with Ethernet/Wi-Fi control |
| Dimensions | 13.9”H x 25.2”W x 19.1”D (352 x 640 x 485 mm) |
| Drivers | 12” neodymium woofer, 2.5” compression driver |
| Frequency Response | 58Hz - 19kHz (-10dB, manufacturer specified) |
| Guitar Input | No |
| HDMI Input | No |
| Inputs | Balanced XLR input and link |
| Maximum SPL | 132dB peak (manufacturer specified) |
| Microphone Input | No |
| Network Control | EtherCON Ethernet connection/link |
| Optical Input | No |
| Passive | No |
| RCA Input | No |
| Rigging | M8 flying points (multiple combinations for horizontal/vertical arrays via integrated rigging frame), plus optional pole-mount adaptor for tripod/sub-top use |
| Spinorama Preference Score | 1.48 |
| Spinorama Preference Score with Perfect Sub | 4.07 |
| TRS Input | No |
| USB Input | No |
| Weight | 69.4 lbs (31.5 kg) |
| XLR Input | Yes |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons