iBasso Jr. Gelato Review: Ranked #622 of 1084

Last updated: October 15, 2026

The iBasso Jr. Gelato ranks #622 out of 1084 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: iBasso

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#622 iBasso Jr. Gelato Audiophonics (FR) eBay

Pros: A single dynamic IEM in a stainless steel shell. Measurements show bass right on the Harman target (score 69 across three measurements).

Cons: Sub-bass falls about 3.4 dB short at 30 Hz. A 2.61 dB spread from the target shows peaks and dips that better tuned sets avoid. Its score rests on three measurements.

Is the iBasso Jr. Gelato right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 19 points.
Released2024 (2 years ago)
BackClosed
ConnectionWired
Deviation From Target2.61 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Harman Preference Score69 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance18 ohms
Sensitivity108 dB/mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-3.4 dB at 30 Hz)
Tonal Tilt+0.02 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz+0.8 dB0.70
High shelf10,000 Hz-3.5 dB0.70
Peak23 Hz+3.0 dB1.70
Peak175 Hz-6.3 dB0.65
Peak828 Hz+1.4 dB2.21
Peak3,859 Hz+1.2 dB4.23
Peak5,588 Hz-3.9 dB3.44
Peak7,577 Hz-1.9 dB6.00

Neutral target

Set a preamp of -1.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 45.

FilterFrequencyGainQ
Low shelf105 Hz-7.8 dB0.70
High shelf10,000 Hz-3.5 dB0.70
Peak23 Hz+2.6 dB2.02
Peak74 Hz-1.1 dB1.91
Peak174 Hz-6.3 dB0.61
Peak825 Hz+1.4 dB1.88
Peak1,980 Hz+1.0 dB4.42
Peak3,859 Hz+1.2 dB4.27
Peak5,587 Hz-3.9 dB3.46
Peak7,576 Hz-1.9 dB6.00

Studio flat target

Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 25.

FilterFrequencyGainQ
Low shelf105 Hz-10.3 dB0.70
High shelf10,000 Hz+0.9 dB0.70
Peak176 Hz-8.1 dB0.66
Peak2,395 Hz+2.8 dB1.40
Peak5,595 Hz-5.9 dB3.68
Peak7,436 Hz-1.9 dB4.26

Warm target

Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz+1.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+3.0 dB1.75
Peak174 Hz-6.0 dB0.67
Peak820 Hz+1.7 dB2.42
Peak5,932 Hz-5.3 dB1.35

Bass target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 58.

FilterFrequencyGainQ
Low shelf105 Hz+4.2 dB0.70
High shelf10,000 Hz-3.5 dB0.70
Peak26 Hz+2.4 dB1.43
Peak85 Hz-1.0 dB2.16
Peak183 Hz-6.2 dB0.70
Peak829 Hz+1.4 dB2.29
Peak1,974 Hz+1.0 dB4.28
Peak3,860 Hz+1.2 dB4.24
Peak5,589 Hz-3.9 dB3.43
Peak7,578 Hz-1.9 dB6.00

Bright target

Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 86 out of 100, up from 36.

FilterFrequencyGainQ
Low shelf105 Hz-7.8 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak23 Hz+2.6 dB2.07
Peak174 Hz-6.3 dB0.61
Peak3,816 Hz+2.4 dB2.43

V-shaped target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 88 out of 100, up from 61.

FilterFrequencyGainQ
Low shelf105 Hz+4.7 dB0.70
High shelf10,000 Hz+0.5 dB0.70
Peak32 Hz+1.9 dB1.64
Peak81 Hz-0.9 dB2.08
Peak178 Hz-4.9 dB0.70
Peak3,916 Hz+1.9 dB0.62
Peak5,319 Hz-1.7 dB6.00
Peak8,000 Hz+1.0 dB1.50

Frequency Response

How the iBasso Jr. Gelato measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

iBasso Jr. GelatoHarman target
Measured frequency response of the iBasso Jr. Gelato-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of eplv, lumerion and soundignity. Thanks to each of them for publishing their work.

More iBasso headphones →