XENNS Mangird UP Review: Ranked #228 of 1118

Last updated: October 17, 2026

The XENNS Mangird UP ranks #228 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Xenns

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

XENNS Mangird UP - ranked #228 of 1118 In-Ear Headphones · Editor's rating 4.3/5

#228 XENNS Mangird UP: $699.99 Discontinued eBay

Pros: A broadly balanced tuning with a preference score of 77 against the Harman target.

Cons: Discontinued, so it is mainly found used. Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones.

Is the XENNS Mangird UP right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 77).
  • your taste runs warm: it scores 86 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 2.4 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired
Deviation From Target1.62 dB standard deviation
Driver TypeTribrid
Drivers1 x 10mm dynamic + 4 x balanced armature + 2 x electrostatic
Form FactorIn-ear
Harman Preference Score77 (median of 8 squig.link measurements, calibrated to AutoEQ)
Impedance20 ohms
Sensitivity110 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.8 dB at 30 Hz)
Tonal Tilt-0.43 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 77.

FilterFrequencyGainQ
High shelf10,000 Hz-1.9 dB0.70
Peak211 Hz-2.3 dB0.85
Peak3,305 Hz+1.9 dB6.00
Peak5,345 Hz+3.4 dB0.74

Neutral target

Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 42.

FilterFrequencyGainQ
Low shelf105 Hz-8.3 dB0.70
High shelf10,000 Hz-1.9 dB0.70
Peak211 Hz-2.2 dB0.63
Peak3,304 Hz+1.9 dB6.00
Peak5,345 Hz+3.4 dB0.74

Studio flat target

Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 94 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-10.9 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak182 Hz-4.0 dB0.70
Peak3,143 Hz+5.1 dB1.56
Peak4,500 Hz-1.5 dB6.00
Peak6,042 Hz+2.1 dB4.78

Warm target

Set a preamp of -2.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 86.

FilterFrequencyGainQ
Low shelf105 Hz+0.5 dB0.70
High shelf10,000 Hz-5.2 dB0.70
Peak211 Hz-2.1 dB0.87
Peak3,323 Hz+1.7 dB6.00
Peak5,345 Hz+1.5 dB0.97

Bass target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 74.

FilterFrequencyGainQ
Low shelf105 Hz+4.0 dB0.70
High shelf10,000 Hz-1.9 dB0.70
Peak211 Hz-2.3 dB0.85
Peak3,305 Hz+1.9 dB6.00
Peak5,345 Hz+3.4 dB0.74

Bright target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-8.3 dB0.70
High shelf10,000 Hz+1.2 dB0.70
Peak211 Hz-2.2 dB0.60
Peak4,708 Hz+5.6 dB1.06

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 84 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+4.7 dB0.70
High shelf10,000 Hz+1.7 dB0.70
Peak4,419 Hz+6.0 dB1.05

Frequency Response

How the XENNS Mangird UP measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 8 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

XENNS Mangird UPHarman target
Measured frequency response of the XENNS Mangird UP-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 8 measurements from the squig.link databases of adri-n, aftersound, atechreviews, audioamigo, awsmdanny, hobbytalk, iemocean and tonedeafmonk. Thanks to each of them for publishing their work.

More Xenns headphones →