Tripowin x 0diBi Vivace Review: Ranked #455 of 1061

Last updated: October 15, 2026

The Tripowin x 0diBi Vivace ranks #455 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Tripowin

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#455 Tripowin x 0diBi Vivace: $29.90 Amazon $29.90 eBay

Pros: A very cheap single dynamic IEM tuned with 0diBi. Measurements show full sub-bass to 20 Hz (score 72 across twelve measurements).

Cons: A 1.88 dB spread from the target still leaves some peaks and dips.

Is the Tripowin x 0diBi Vivace right for you?

Buy it if

  • your taste runs warm: it scores 83 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 2.3 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 18 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $6 less.
Released2024 (2 years ago)
BackClosed
ConnectionWired
Deviation From Target1.88 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Harman Preference Score72 (median of 12 squig.link measurements, calibrated to AutoEQ)
Impedance18 ohms
Sensitivity106 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.5 dB at 30 Hz)
Tonal Tilt-0.71 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz-0.9 dB0.70
Peak174 Hz-3.1 dB0.81
Peak4,243 Hz+3.6 dB1.29

Neutral target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 34.

FilterFrequencyGainQ
Low shelf105 Hz-9.5 dB0.70
Peak174 Hz-3.0 dB0.70
Peak675 Hz+1.1 dB2.60
Peak4,243 Hz+3.6 dB1.29

Studio flat target

Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak170 Hz-4.9 dB0.75
Peak720 Hz+1.0 dB3.22
Peak1,448 Hz-1.0 dB3.75
Peak3,183 Hz+4.7 dB1.50

Warm target

Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 93 out of 100, up from 83.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-3.5 dB0.70
Peak174 Hz-2.9 dB0.89
Peak704 Hz+1.3 dB2.74
Peak1,581 Hz-1.2 dB2.37
Peak3,791 Hz+2.1 dB3.05
Peak7,621 Hz-1.8 dB6.00

Bass target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 91 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz+2.9 dB0.70
Peak176 Hz-3.1 dB0.85
Peak4,243 Hz+3.6 dB1.30

Bright target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-9.5 dB0.70
High shelf10,000 Hz+1.9 dB0.70
Peak174 Hz-3.1 dB0.67
Peak680 Hz+1.1 dB2.12
Peak1,529 Hz-1.2 dB2.97
Peak3,629 Hz+2.0 dB3.18
Peak5,345 Hz+5.4 dB0.98
Peak6,908 Hz-2.9 dB5.85

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 12 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 80 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz+3.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak4,438 Hz+6.0 dB1.14

Frequency Response

How the Tripowin x 0diBi Vivace measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 12 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Tripowin x 0diBi VivaceHarman target
Measured frequency response of the Tripowin x 0diBi Vivace-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 12 measurements from the squig.link databases of atechreviews, audioamigo, cqtek, dl, elrics, jacstone, lumerion, pw, silicagel, soundcheck39, superreview and vortexreviews. Thanks to each of them for publishing their work.

More Tripowin headphones →