The Tripowin Ruta10 ranks #421 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Tripowin
Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#421 Tripowin Ruta10: $28.99 Amazon $28.99 eBay
Pros: A very cheap single dynamic IEM with a 10mm LCP driver. Measurements show bass right on the Harman target (score 72 across three measurements).
Cons: Treble sits about 3.4 dB below target, a dark, relaxed balance. Its score rests on three measurements.
Is the Tripowin Ruta10 right for you?
Buy it if
- your taste runs warm: it scores 80 for that sound.
- you are sensitive to bright or sharp treble (treble sits 3.4 dB below target).
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 17 points.
Skip it if
- you want the best value: the higher-rated EPZ G10 costs about $5 less.
| Released | 2025 (1 year ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.12 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm LCP dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 73 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 108 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.4 dB at 30 Hz) |
| Tonal Tilt | -0.33 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 73.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.8 dB | 0.70 |
| High shelf | 10,000 Hz | -2.9 dB | 0.70 |
| Peak | 23 Hz | +2.3 dB | 2.35 |
| Peak | 89 Hz | -0.9 dB | 3.58 |
| Peak | 154 Hz | -3.2 dB | 0.78 |
| Peak | 689 Hz | +1.2 dB | 1.88 |
| Peak | 1,778 Hz | -1.9 dB | 2.77 |
| Peak | 3,505 Hz | +2.0 dB | 6.00 |
| Peak | 5,345 Hz | +4.0 dB | 0.98 |
Neutral target
Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 43.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.7 dB | 0.70 |
| High shelf | 10,000 Hz | -2.9 dB | 0.70 |
| Peak | 23 Hz | +1.8 dB | 3.20 |
| Peak | 77 Hz | -0.7 dB | 1.23 |
| Peak | 154 Hz | -3.3 dB | 0.70 |
| Peak | 660 Hz | +1.2 dB | 1.57 |
| Peak | 1,781 Hz | -1.9 dB | 2.84 |
| Peak | 3,505 Hz | +2.0 dB | 6.00 |
| Peak | 5,345 Hz | +4.0 dB | 0.98 |
Studio flat target
Set a preamp of -5.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 86 out of 100, up from 24.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -9.3 dB | 0.70 |
| High shelf | 10,000 Hz | +1.0 dB | 0.70 |
| Peak | 157 Hz | -5.0 dB | 0.74 |
| Peak | 1,656 Hz | -1.5 dB | 4.25 |
| Peak | 3,446 Hz | +4.9 dB | 1.58 |
| Peak | 6,048 Hz | +2.3 dB | 5.91 |
Warm target
Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 93 out of 100, up from 80.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.1 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 23 Hz | +2.2 dB | 2.53 |
| Peak | 77 Hz | -0.7 dB | 1.38 |
| Peak | 154 Hz | -3.0 dB | 0.82 |
| Peak | 687 Hz | +1.5 dB | 1.73 |
| Peak | 1,807 Hz | -2.2 dB | 3.15 |
| Peak | 2,399 Hz | -1.1 dB | 6.00 |
| Peak | 3,539 Hz | +2.0 dB | 5.32 |
| Peak | 5,938 Hz | +2.4 dB | 1.24 |
Bass target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 67.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.1 dB | 0.70 |
| High shelf | 10,000 Hz | -2.9 dB | 0.70 |
| Peak | 30 Hz | +1.3 dB | 1.49 |
| Peak | 158 Hz | -3.1 dB | 0.90 |
| Peak | 709 Hz | +1.2 dB | 2.14 |
| Peak | 1,775 Hz | -1.9 dB | 2.71 |
| Peak | 3,506 Hz | +2.0 dB | 6.00 |
| Peak | 5,345 Hz | +4.0 dB | 0.98 |
Bright target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 79 out of 100, up from 30.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.8 dB | 0.70 |
| Peak | 154 Hz | -3.3 dB | 0.70 |
| Peak | 4,708 Hz | +6.0 dB | 1.25 |
V-shaped target
Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 62.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.5 dB | 0.70 |
| High shelf | 10,000 Hz | +1.0 dB | 0.70 |
| Peak | 154 Hz | -1.7 dB | 1.15 |
| Peak | 582 Hz | +1.0 dB | 1.61 |
| Peak | 1,697 Hz | -2.0 dB | 2.11 |
| Peak | 4,056 Hz | +6.0 dB | 1.24 |
| Peak | 5,695 Hz | +3.1 dB | 5.83 |
- Links
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Tripowin Ruta10 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 3 measurements from the squig.link databases of bassaudio, soundcheck39 and tdl. Thanks to each of them for publishing their work.