Name: TINHIFI C0
Brand: TINHIFI
Price: 23.90 USD

The TINHIFI C0 ranks #341 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

TINHIFI C0 - ranked #341 of 1118 In-Ear Headphones · Editor's rating 4.1/5

Check price at Amazon ($23.90) →

#341 TINHIFI C0: $23.90 Amazon $23.90 eBay

Pros: A broadly balanced tuning with a preference score of 75 against the Harman target.

Cons: About 3 dB less bass than the Harman target below 150 Hz, which can sound thin on pop, hip hop and electronic music. An uneven response, 1.9 dB standard deviation from target.

Is the TINHIFI C0 right for you?

Buy it if

you want the tuning most listeners prefer in blind tests out of the box (Harman score 75).

Skip it if

you want more bass (about 3 dB below target).
you want the best value: the higher-rated TRN MT3 costs about $6 less.

Back	Closed
Connection	Wired
Deviation From Target	1.95 dB standard deviation
Driver Type	Dynamic
Drivers	1 x 10mm dynamic
Form Factor	In-ear
Harman Preference Score	75 (median of 8 squig.link measurements, calibrated to AutoEQ)
Impedance	32 ohms
Sensitivity	105 dB
Sub-bass Extension	Within 6 dB of target down to 20 Hz (-4.7 dB at 30 Hz)
Tonal Tilt	+0.42 (negative is warmer, positive brighter)

EQ Presets

Target sound

Harman target

Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 93 out of 100, up from 75.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+4.1 dB	0.70
High shelf	10,000 Hz	-3.2 dB	0.70
Peak	23 Hz	+1.2 dB	1.56
Peak	82 Hz	-0.9 dB	2.17
Peak	186 Hz	-1.4 dB	0.75
Peak	668 Hz	+0.9 dB	1.89
Peak	1,525 Hz	-1.0 dB	3.56
Peak	5,755 Hz	+3.1 dB	1.10

Neutral target

Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 94 out of 100, up from 64.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-4.4 dB	0.70
High shelf	10,000 Hz	-3.2 dB	0.70
Peak	117 Hz	-1.7 dB	0.67
Peak	708 Hz	+0.9 dB	2.51
Peak	1,519 Hz	-1.1 dB	3.39
Peak	5,753 Hz	+3.1 dB	1.10

Studio flat target

Set a preamp of -3.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 45.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-7.0 dB	0.70
High shelf	10,000 Hz	+1.5 dB	0.70
Peak	170 Hz	-3.4 dB	0.71
Peak	1,487 Hz	-1.0 dB	3.81
Peak	3,037 Hz	+3.6 dB	1.63
Peak	6,717 Hz	+1.8 dB	2.71

Warm target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 95 out of 100, up from 72.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+4.4 dB	0.70
High shelf	10,000 Hz	-6.0 dB	0.70
Peak	23 Hz	+1.2 dB	1.22
Peak	117 Hz	-1.3 dB	0.88
Peak	250 Hz	-0.7 dB	2.63
Peak	719 Hz	+1.1 dB	2.25
Peak	1,691 Hz	-1.3 dB	2.62
Peak	6,097 Hz	+2.2 dB	4.52

Bass target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 58.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+5.9 dB	0.70
High shelf	10,000 Hz	-3.2 dB	0.70
Peak	64 Hz	+1.0 dB	2.41
Peak	224 Hz	-1.4 dB	1.62
Peak	1,515 Hz	-1.1 dB	3.30
Peak	5,756 Hz	+3.1 dB	1.10

Bright target

Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 82 out of 100, up from 51.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	-4.4 dB	0.70
High shelf	10,000 Hz	+0.3 dB	0.70
Peak	5,026 Hz	+5.4 dB	1.36

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 81 out of 100, up from 56.

Filter	Frequency	Gain	Q
Low shelf	105 Hz	+6.0 dB	0.70
High shelf	10,000 Hz	+1.4 dB	0.70
Peak	4,796 Hz	+5.6 dB	1.24

Check current price at Amazon ($23.90) →Search eBay for TINHIFI C0 →

Reviews, Comparisons and Sound Samples
- Frequency response measurements of the TINHIFI C0 by 8 squig.link measurers

Frequency Response

How the TINHIFI C0 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 8 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

TINHIFI C0Harman target

Measurement data: median of 8 measurements from the squig.link databases of achoreviews, ankramutt, dvewlsh, practiphile, soundcheck39, superreview, tonedeafmonk and yoshiultra. Thanks to each of them for publishing their work.