THHIFI Face Red Review: Ranked #622 of 1253

Last updated: October 16, 2026

The THHIFI Face Red ranks #622 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

THHIFI Face Red - ranked #622 of 1253 In-Ear Headphones · Editor's rating 3.8/5

#622 THHIFI Face Red: $189 Discontinued eBay

Pros: A broadly balanced tuning with a preference score of 71 against the Harman target.

Cons: Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.1 dB standard deviation from target. Discontinued.

Is the THHIFI Face Red right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.2 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 15 points.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired (3.5mm)
Deviation From Target2.09 dB standard deviation
Driver TypeDynamic
Drivers1 Dynamic (10mm resin composite)
Form FactorIn-ear
Harman Preference Score71 (median of 3 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.1 dB at 30 Hz)
Tonal Tilt-0.54 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz-0.5 dB0.70
High shelf10,000 Hz+0.4 dB0.70
Peak154 Hz-3.0 dB0.85
Peak1,820 Hz-1.5 dB2.85
Peak3,531 Hz+4.7 dB1.80
Peak6,108 Hz+2.5 dB6.00

Neutral target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 35.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz+0.4 dB0.70
Peak154 Hz-3.0 dB0.72
Peak1,827 Hz-1.5 dB2.96
Peak3,531 Hz+4.7 dB1.79
Peak6,108 Hz+2.5 dB6.00

Studio flat target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 17.

FilterFrequencyGainQ
Low shelf105 Hz-11.6 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak154 Hz-4.7 dB0.74
Peak3,118 Hz+6.0 dB2.01
Peak6,734 Hz+1.6 dB4.26

Warm target

Set a preamp of -3.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 83 out of 100, up from 78.

FilterFrequencyGainQ
High shelf10,000 Hz-1.7 dB0.70
Peak154 Hz-2.8 dB0.84
Peak3,309 Hz+3.5 dB3.38

Bass target

Set a preamp of -4.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 74.

FilterFrequencyGainQ
Low shelf105 Hz+3.3 dB0.70
High shelf10,000 Hz+0.4 dB0.70
Peak154 Hz-3.0 dB0.89
Peak1,820 Hz-1.5 dB2.83
Peak3,531 Hz+4.7 dB1.80
Peak6,108 Hz+2.5 dB6.00

Bright target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 85 out of 100, up from 24.

FilterFrequencyGainQ
Low shelf105 Hz-9.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak154 Hz-3.0 dB0.68
Peak4,056 Hz+6.0 dB1.21
Peak5,859 Hz+2.0 dB6.00

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 84 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+4.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak23 Hz+1.7 dB1.34
Peak91 Hz-1.8 dB1.08
Peak181 Hz-1.4 dB3.20
Peak1,939 Hz-2.3 dB1.83
Peak3,354 Hz+6.0 dB1.23
Peak5,562 Hz+4.1 dB4.14

Frequency Response

How the THHIFI Face Red measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

THHIFI Face RedHarman target
Measured frequency response of the THHIFI Face Red-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of aftersound, animagus and hbb. Thanks to each of them for publishing their work.