TANCHJIM ONE DSP Review: Ranked #171 of 1118

Last updated: October 17, 2026

The TANCHJIM ONE DSP ranks #171 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Tanchjim

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

TANCHJIM ONE DSP - ranked #171 of 1118 In-Ear Headphones · Editor's rating 4.4/5

#171 TANCHJIM ONE DSP: $28 Discontinued eBay

Pros: A broadly balanced tuning with a preference score of 78 against the Harman target.

Cons: Discontinued, so it is mainly found used. Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones.

Is the TANCHJIM ONE DSP right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 78).
  • your taste runs warm: it scores 85 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 2.6 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionUSB-C
Deviation From Target1.51 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Harman Preference Score78 (median of 9 squig.link measurements, calibrated to AutoEQ)
Impedance16 ohms
Sensitivity126 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-2.9 dB at 30 Hz)
Tonal Tilt-0.21 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz+1.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak36 Hz+0.9 dB1.16
Peak124 Hz-1.8 dB0.65
Peak365 Hz-1.0 dB1.74
Peak5,915 Hz+3.4 dB0.70

Neutral target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 49.

FilterFrequencyGainQ
Low shelf105 Hz-6.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak124 Hz-1.9 dB0.49
Peak426 Hz-0.8 dB2.04
Peak5,913 Hz+3.4 dB0.70

Studio flat target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 91 out of 100, up from 28.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
Peak56 Hz+0.9 dB2.18
Peak160 Hz-3.3 dB0.48
Peak421 Hz-0.8 dB2.07
Peak2,773 Hz+3.8 dB1.21
Peak7,279 Hz+1.7 dB1.69

Warm target

Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 96 out of 100, up from 85.

FilterFrequencyGainQ
Low shelf105 Hz+2.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak36 Hz+0.8 dB1.34
Peak124 Hz-1.7 dB0.80
Peak365 Hz-0.9 dB2.11
Peak6,887 Hz+1.5 dB0.95

Bass target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+5.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak38 Hz+1.0 dB1.12
Peak124 Hz-1.7 dB0.75
Peak365 Hz-1.1 dB1.60
Peak5,918 Hz+3.4 dB0.70

Bright target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 85 out of 100, up from 36.

FilterFrequencyGainQ
Low shelf105 Hz-6.8 dB0.70
High shelf10,000 Hz-3.1 dB0.70
Peak124 Hz-1.9 dB0.50
Peak425 Hz-0.8 dB1.96
Peak5,345 Hz+5.8 dB1.07

V-shaped target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 81 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz+5.7 dB0.70
High shelf10,000 Hz-1.7 dB0.70
Peak103 Hz-1.0 dB2.92
Peak966 Hz-0.7 dB1.36
Peak4,159 Hz+0.7 dB1.22
Peak5,345 Hz+5.5 dB0.85
Peak6,855 Hz-2.6 dB6.00

Frequency Response

How the TANCHJIM ONE DSP measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 9 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

TANCHJIM ONE DSPHarman target
Measured frequency response of the TANCHJIM ONE DSP-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 9 measurements from the squig.link databases of aftersound, arn, audioamigo, fahryst, hbb, hu-fi, jacstone, kr0mka and practiphile. Thanks to each of them for publishing their work.

More Tanchjim headphones →