SoundPEATS Free2 Classic Review: Ranked #658 of 1084

Last updated: October 15, 2026

The SoundPEATS Free2 Classic ranks #658 out of 1084 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Soundpeats

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

SoundPEATS Free2 Classic - ranked #658 of 1084 In-Ear Headphones · Editor's rating 3.5/5

#658 SoundPEATS Free2 Classic TWS Discontinued eBay

Pros: Budget true wireless earbuds with about 8 hours per charge and 30 hours with the case. It measures reasonably close to the Harman target (score 68 across three measurements).

Cons: Discontinued, so it is mainly found used. Treble sits about 5.3 dB below target, a dark, relaxed balance. Sub-bass falls about 3.2 dB short at 30 Hz. A 2.71 dB spread from the target shows peaks and dips that better tuned sets avoid. Its score rests on three measurements.

Is the SoundPEATS Free2 Classic right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 5.3 dB below target).
  • you want noise cancelling for commutes or flights.
  • you are happy to use EQ: our preset lifts its Harman match by about 19 points.

Skip it if

  • you want to buy it new: it is discontinued.
Active Noise CancellingYes
BackClosed
Bluetooth Version5.1
ConnectionTrue wireless
Deviation From Target2.71 dB standard deviation
Driver TypeDynamic
Drivers1 x 6mm dynamic
Form FactorIn-ear
Harman Preference Score68 (median of 3 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-3.2 dB at 30 Hz)
Tonal Tilt-0.23 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+2.5 dB0.70
High shelf10,000 Hz+0.7 dB0.70
Peak23 Hz+3.5 dB2.28
Peak78 Hz-3.4 dB2.05
Peak109 Hz-1.3 dB4.19
Peak183 Hz+3.0 dB4.10
Peak2,066 Hz-2.8 dB2.12
Peak3,379 Hz+1.5 dB6.00
Peak4,056 Hz+6.0 dB1.49
Peak5,672 Hz+3.7 dB4.98

Neutral target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 40.

FilterFrequencyGainQ
Low shelf105 Hz-6.0 dB0.70
High shelf10,000 Hz+0.7 dB0.70
Peak23 Hz+3.0 dB2.58
Peak76 Hz-3.8 dB1.80
Peak109 Hz-1.4 dB4.22
Peak184 Hz+3.0 dB4.12
Peak2,066 Hz-2.8 dB2.12
Peak3,379 Hz+1.5 dB6.00
Peak4,056 Hz+6.0 dB1.49
Peak5,672 Hz+3.7 dB4.98

Studio flat target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 25.

FilterFrequencyGainQ
Low shelf105 Hz-8.6 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak23 Hz+2.7 dB2.86
Peak51 Hz-1.0 dB2.59
Peak93 Hz-3.7 dB1.17
Peak180 Hz+1.6 dB6.00
Peak282 Hz-1.4 dB3.56
Peak1,847 Hz-2.3 dB1.82
Peak3,573 Hz+6.0 dB1.23
Peak5,490 Hz+3.8 dB4.05

Warm target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 88 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz+2.7 dB0.70
High shelf10,000 Hz-2.0 dB0.70
Peak23 Hz+3.4 dB2.28
Peak77 Hz-3.3 dB2.17
Peak184 Hz+3.2 dB3.60
Peak2,066 Hz-3.2 dB2.62
Peak3,659 Hz+2.4 dB4.21
Peak4,653 Hz+6.0 dB1.73

Bass target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+5.1 dB0.70
High shelf10,000 Hz+0.7 dB0.70
Peak36 Hz+1.2 dB1.73
Peak87 Hz-2.2 dB2.22
Peak184 Hz+3.0 dB4.76
Peak572 Hz+1.1 dB1.72
Peak2,066 Hz-2.8 dB2.13
Peak3,380 Hz+1.5 dB6.00
Peak4,056 Hz+6.0 dB1.49
Peak5,672 Hz+3.7 dB4.98

Bright target

Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 75 out of 100, up from 27.

FilterFrequencyGainQ
Low shelf105 Hz-6.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak23 Hz+3.1 dB2.54
Peak76 Hz-3.7 dB1.81
Peak183 Hz+3.0 dB4.14
Peak2,066 Hz-2.9 dB2.07
Peak3,807 Hz+6.0 dB1.45
Peak5,573 Hz+4.0 dB4.36

V-shaped target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 73 out of 100, up from 57.

FilterFrequencyGainQ
Low shelf105 Hz+5.4 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak86 Hz-1.6 dB2.39
Peak187 Hz+4.0 dB2.46
Peak472 Hz+1.6 dB1.85
Peak2,066 Hz-2.8 dB1.76
Peak3,573 Hz+6.0 dB1.39
Peak5,500 Hz+4.3 dB3.86

Frequency Response

How the SoundPEATS Free2 Classic measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

SoundPEATS Free2 ClassicHarman target
Measured frequency response of the SoundPEATS Free2 Classic-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of dhrme, hobbytalk and vortexreviews. Thanks to each of them for publishing their work.

More Soundpeats headphones →