Seek Real Dawn Review: Ranked #966 of 1369

Last updated: October 17, 2026

The Seek Real Dawn ranks #966 out of 1369 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 17, 2026 at 6:04 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

Seek Real Dawn - ranked #966 of 1369 In-Ear Headphones · Editor's rating 3.3/5

#966 Seek Real Dawn: 49.00 Discontinued eBay

Pros: A published AutoEQ preset corrects its response toward the Harman target, so a few minutes of EQ setup closes most of the gap.

Cons: Treble about 4 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.9 dB standard deviation from target. Discontinued.

Is the Seek Real Dawn right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 4.1 dB below target).
  • you are happy to use EQ: our preset lifts its Harman match by about 21 points.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired
Deviation From Target2.90 dB standard deviation
Driver TypeHybrid
Drivers10x14mm square planar magnetic driver + 1 Knowles balanced armature
Form FactorIn-ear
Frequency Response20Hz - 25kHz
Harman Preference Score65 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance17 ohms
Sensitivity107 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.6 dB at 30 Hz)
Tonal Tilt-0.21 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 65.

FilterFrequencyGainQ
Low shelf105 Hz+2.3 dB0.70
High shelf10,000 Hz+1.3 dB0.70
Peak126 Hz-1.9 dB0.88
Peak673 Hz+2.3 dB2.02
Peak1,444 Hz-1.4 dB6.00
Peak1,743 Hz-5.9 dB4.34
Peak2,692 Hz+2.5 dB5.67
Peak4,056 Hz+6.0 dB1.32
Peak5,615 Hz+3.2 dB5.31
Peak8,000 Hz-3.3 dB6.00

Neutral target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 37.

FilterFrequencyGainQ
Low shelf105 Hz-6.3 dB0.70
High shelf10,000 Hz+1.3 dB0.70
Peak115 Hz-2.1 dB0.79
Peak674 Hz+2.3 dB2.03
Peak1,444 Hz-1.4 dB6.00
Peak1,743 Hz-5.9 dB4.34
Peak2,692 Hz+2.5 dB5.66
Peak4,056 Hz+6.0 dB1.32
Peak5,615 Hz+3.2 dB5.31
Peak8,000 Hz-3.3 dB6.00

Studio flat target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-8.8 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak145 Hz-3.8 dB0.90
Peak677 Hz+2.1 dB2.01
Peak1,743 Hz-6.3 dB3.97
Peak2,954 Hz+6.0 dB1.33
Peak5,345 Hz+4.8 dB2.32
Peak7,963 Hz-2.2 dB4.71

Warm target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 83 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz+2.5 dB0.70
High shelf10,000 Hz-1.0 dB0.70
Peak666 Hz+2.6 dB1.85
Peak1,746 Hz-6.1 dB4.70
Peak3,148 Hz+2.4 dB1.96
Peak5,016 Hz+6.0 dB1.69
Peak7,699 Hz-5.1 dB6.00

Bass target

Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 86 out of 100, up from 58.

FilterFrequencyGainQ
Low shelf105 Hz+5.5 dB0.70
High shelf10,000 Hz+1.3 dB0.70
Peak164 Hz-1.7 dB1.10
Peak672 Hz+2.3 dB1.99
Peak1,443 Hz-1.4 dB6.00
Peak1,743 Hz-5.9 dB4.34
Peak2,692 Hz+2.5 dB5.67
Peak4,056 Hz+6.0 dB1.32
Peak5,615 Hz+3.2 dB5.31
Peak8,000 Hz-3.3 dB6.00

Bright target

Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 81 out of 100, up from 27.

FilterFrequencyGainQ
Low shelf105 Hz-6.3 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak108 Hz-2.2 dB0.90
Peak214 Hz-0.8 dB2.99
Peak646 Hz+2.2 dB1.71
Peak1,435 Hz-1.5 dB5.47
Peak1,743 Hz-6.1 dB4.21
Peak2,705 Hz+2.4 dB6.00
Peak3,807 Hz+6.0 dB1.22
Peak5,523 Hz+3.2 dB3.77

V-shaped target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 58.

FilterFrequencyGainQ
Low shelf105 Hz+5.7 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak543 Hz+2.3 dB1.31
Peak1,394 Hz-1.4 dB3.98
Peak1,729 Hz-6.1 dB4.04
Peak2,690 Hz+2.1 dB6.00
Peak3,573 Hz+6.0 dB1.19
Peak5,432 Hz+3.5 dB3.07

Frequency Response

How the Seek Real Dawn measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Seek Real DawnHarman target
Measured frequency response of the Seek Real Dawn-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of hbb, ianfann and nymz. Thanks to each of them for publishing their work.