The SeeAudio Yume II ranks #145 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: SeeAudio
Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#145 SeeAudio Yume II: $199 Discontinued eBay
Pros: A broadly balanced tuning with a preference score of 79 against the Harman target.
Cons: Discontinued, so it is mainly found used. Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones.
Is the SeeAudio Yume II right for you?
Buy it if
- you want the tuning most listeners prefer in blind tests out of the box (Harman score 79).
- you are sensitive to bright or sharp treble (treble sits 2.5 dB below target).
Skip it if
- you want to buy it new: it is discontinued.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 1.63 dB standard deviation |
| Driver Type | Hybrid |
| Drivers | 1 x dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 79 (median of 8 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 17 ohms |
| Sensitivity | 113 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.7 dB at 30 Hz) |
| Tonal Tilt | -0.08 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -4.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 79.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.8 dB | 0.70 |
| High shelf | 10,000 Hz | -4.4 dB | 0.70 |
| Peak | 3,194 Hz | +2.1 dB | 6.00 |
| Peak | 5,016 Hz | +4.5 dB | 1.08 |
Neutral target
Set a preamp of -4.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 49.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.7 dB | 0.70 |
| High shelf | 10,000 Hz | -4.4 dB | 0.70 |
| Peak | 3,194 Hz | +2.1 dB | 6.00 |
| Peak | 5,016 Hz | +4.5 dB | 1.08 |
Studio flat target
Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 31.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -9.3 dB | 0.70 |
| High shelf | 10,000 Hz | +1.3 dB | 0.70 |
| Peak | 171 Hz | -3.3 dB | 0.80 |
| Peak | 1,512 Hz | -1.4 dB | 2.86 |
| Peak | 3,274 Hz | +5.6 dB | 1.60 |
| Peak | 5,792 Hz | +2.9 dB | 6.00 |
Warm target
Set a preamp of -2.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 80.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.0 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 1,710 Hz | -1.7 dB | 2.49 |
| Peak | 3,264 Hz | +2.1 dB | 6.00 |
| Peak | 5,016 Hz | +2.5 dB | 1.58 |
| Peak | 7,636 Hz | -2.5 dB | 6.00 |
Bass target
Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 68.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.5 dB | 0.70 |
| High shelf | 10,000 Hz | -4.4 dB | 0.70 |
| Peak | 3,194 Hz | +2.1 dB | 6.00 |
| Peak | 5,016 Hz | +4.5 dB | 1.09 |
Bright target
Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 88 out of 100, up from 38.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.8 dB | 0.70 |
| High shelf | 10,000 Hz | -1.0 dB | 0.70 |
| Peak | 174 Hz | -1.5 dB | 0.83 |
| Peak | 620 Hz | +1.0 dB | 1.66 |
| Peak | 1,604 Hz | -1.8 dB | 2.13 |
| Peak | 3,349 Hz | +2.6 dB | 4.17 |
| Peak | 5,345 Hz | +5.8 dB | 0.91 |
| Peak | 6,801 Hz | -2.9 dB | 6.00 |
V-shaped target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 8 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 87 out of 100, up from 66.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.8 dB | 0.70 |
| Peak | 492 Hz | +1.1 dB | 1.43 |
| Peak | 1,471 Hz | -2.0 dB | 2.21 |
| Peak | 3,346 Hz | +2.8 dB | 3.73 |
| Peak | 5,345 Hz | +5.7 dB | 0.79 |
| Peak | 6,926 Hz | -3.3 dB | 5.62 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the SeeAudio Yume II measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 8 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 8 measurements from the squig.link databases of dchpgall, digaoreviews, hbb, lown-fi, musicafe, nymz, soundignity and therollo9. Thanks to each of them for publishing their work.
Head-to-Head Comparisons
1 comparisonsNo comparisons match that search.