PMG Audio Apx SE Review: Ranked #611 of 1253

Last updated: October 16, 2026

The PMG Audio Apx SE ranks #611 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: PMG Audio

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

PMG Audio Apx SE - ranked #611 of 1253 In-Ear Headphones · Editor's rating 3.8/5

#611 PMG Audio Apx SE: $5,500 Discontinued eBay

Older model: the PMG Audio Apx (ranked higher, rated 4/5). See every PMG Audio Apx generation.

Pros: A broadly balanced tuning with a preference score of 71 against the Harman target.

Cons: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.2 dB standard deviation from target. Discontinued.

Is the PMG Audio Apx SE right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 3.0 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 16 points.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionWired
Deviation From Target2.22 dB standard deviation
Driver TypeQuadbrid (1 dynamic + 7 balanced armature + 2 planar magnetic + 1 piezoelectric)
Drivers1 x dynamic + 7 x balanced armature + 2 x planar magnetic + 1 x piezoelectric
Form FactorIn-ear
Harman Preference Score71 (median of 3 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-2.5 dB at 30 Hz)
Tonal Tilt-0.36 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz+1.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak160 Hz-3.0 dB0.69
Peak5,345 Hz+4.5 dB0.76

Neutral target

Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 42.

FilterFrequencyGainQ
Low shelf105 Hz-7.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak145 Hz-3.1 dB0.60
Peak5,345 Hz+4.5 dB0.76

Studio flat target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 92 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-9.7 dB0.70
High shelf10,000 Hz-3.6 dB0.70
Peak170 Hz-4.8 dB0.64
Peak1,295 Hz-2.0 dB3.63
Peak2,468 Hz+3.0 dB3.92
Peak5,016 Hz+4.0 dB0.49

Warm target

Set a preamp of -2.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 88 out of 100, up from 79.

FilterFrequencyGainQ
Low shelf105 Hz+1.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak151 Hz-2.9 dB0.72
Peak5,378 Hz+2.9 dB1.16

Bass target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz+4.9 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak174 Hz-3.0 dB0.77
Peak5,345 Hz+4.5 dB0.76

Bright target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 84 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-7.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz+1.8 dB2.59
Peak146 Hz-3.1 dB0.58
Peak1,279 Hz-1.9 dB5.04
Peak3,654 Hz+0.7 dB0.70
Peak5,345 Hz+5.7 dB0.75
Peak6,754 Hz-2.2 dB6.00

V-shaped target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 80 out of 100, up from 62.

FilterFrequencyGainQ
Low shelf105 Hz+5.3 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak34 Hz+1.0 dB1.61
Peak155 Hz-1.7 dB0.94
Peak1,240 Hz-2.3 dB3.61
Peak2,524 Hz+1.3 dB1.69
Peak5,345 Hz+5.6 dB0.65
Peak6,866 Hz-2.6 dB6.00

Frequency Response

How the PMG Audio Apx SE measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

PMG Audio Apx SEHarman target
Measured frequency response of the PMG Audio Apx SE-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of aftersound, ducbloke and eliseaudio. Thanks to each of them for publishing their work.

More PMG Audio headphones →