Mysticraft Myth Review: Ranked #547 of 1118

Last updated: October 17, 2026

The Mysticraft Myth ranks #547 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#547 Mysticraft Myth: £849 Elise Audio eBay

Pros: A broadly balanced tuning with a preference score of 71 against the Harman target.

Cons: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 1.9 dB standard deviation from target.

Is the Mysticraft Myth right for you?

Buy it if

  • your taste runs bass-heavy: it scores 81 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 2.8 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 17 points.
BackClosed
ConnectionWired
Deviation From Target1.93 dB standard deviation
Driver TypeTribrid
Drivers1 x 9.2mm dynamic + 4 x balanced armature + 2 x micro-planar
Form FactorIn-ear
Harman Preference Score71 (median of 10 squig.link measurements, calibrated to AutoEQ)
Impedance10 ohms
Sensitivity100 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+2.2 dB at 30 Hz)
Tonal Tilt-0.76 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz-1.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak888 Hz+1.7 dB3.27
Peak1,617 Hz-3.2 dB4.62
Peak5,019 Hz+4.1 dB0.93

Neutral target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 31.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak887 Hz+1.7 dB3.23
Peak1,618 Hz-3.2 dB4.63
Peak5,018 Hz+4.1 dB0.93

Studio flat target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 13.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz-0.3 dB0.70
Peak141 Hz-3.0 dB0.71
Peak899 Hz+1.6 dB3.68
Peak1,615 Hz-3.1 dB4.66
Peak2,954 Hz+5.3 dB1.67
Peak5,932 Hz+1.5 dB1.24

Warm target

Set a preamp of -1.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 81.

FilterFrequencyGainQ
Low shelf105 Hz-1.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak867 Hz+1.9 dB3.17
Peak1,414 Hz-1.3 dB4.30
Peak1,627 Hz-3.2 dB5.56
Peak6,067 Hz+2.0 dB0.56

Bass target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 81.

FilterFrequencyGainQ
Low shelf105 Hz+2.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak888 Hz+1.7 dB3.26
Peak1,617 Hz-3.2 dB4.62
Peak5,021 Hz+4.1 dB0.93

Bright target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 81 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
High shelf10,000 Hz-3.1 dB0.70
Peak1,611 Hz-3.2 dB4.72
Peak5,016 Hz+6.0 dB1.06

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 10 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz+2.9 dB0.70
High shelf10,000 Hz-1.5 dB0.70
Peak339 Hz+1.2 dB0.95
Peak1,578 Hz-3.3 dB4.52
Peak1,822 Hz-1.1 dB6.00
Peak3,146 Hz+1.8 dB1.77
Peak5,345 Hz+5.8 dB0.80
Peak6,875 Hz-3.0 dB6.00

Frequency Response

How the Mysticraft Myth measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 10 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Mysticraft MythHarman target
Measured frequency response of the Mysticraft Myth-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 10 measurements from the squig.link databases of aden, aftersound, boizoff, eliseaudio, hu-fi, iemocean, jaytiss, kr0mka, precog and pw. Thanks to each of them for publishing their work.