MOONDROP MAY DSP Review: Ranked #340 of 1118

Last updated: October 17, 2026

The MOONDROP MAY DSP ranks #340 out of 1118 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Moondrop

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

MOONDROP MAY DSP - ranked #340 of 1118 In-Ear Headphones · Editor's rating 4.1/5

#340 MOONDROP MAY DSP: $64.99 Discontinued eBay

Pros: A broadly balanced tuning with a preference score of 75 against the Harman target.

Cons: Discontinued, so it is mainly found used. Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones.

Is the MOONDROP MAY DSP right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 75).
  • your taste runs warm: it scores 87 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 3.4 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want to buy it new: it is discontinued.
BackClosed
ConnectionUSB-C
Deviation From Target1.72 dB standard deviation
Driver TypeHybrid
Drivers1 x 10mm dynamic + 1 x 6mm planar
Form FactorIn-ear
Harman Preference Score75 (median of 4 squig.link measurements, calibrated to AutoEQ)
Impedance30 ohms
Sensitivity120 dB/Vrms
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.8 dB at 30 Hz)
Tonal Tilt-0.70 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 88 out of 100, up from 75.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-4.6 dB0.70
Peak1,741 Hz-1.0 dB3.48
Peak5,440 Hz+5.1 dB1.37

Neutral target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 90 out of 100, up from 36.

FilterFrequencyGainQ
Low shelf105 Hz-9.2 dB0.70
High shelf10,000 Hz-4.6 dB0.70
Peak23 Hz-1.4 dB1.77
Peak1,742 Hz-1.0 dB3.50
Peak5,439 Hz+5.1 dB1.37

Studio flat target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 17.

FilterFrequencyGainQ
Low shelf105 Hz-11.4 dB0.70
High shelf10,000 Hz+1.7 dB0.70
Peak171 Hz-2.3 dB0.56
Peak1,633 Hz-1.1 dB4.03
Peak2,926 Hz+2.0 dB4.10
Peak5,345 Hz+3.2 dB0.52
Peak7,182 Hz-1.4 dB4.61

Warm target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 94 out of 100, up from 87.

FilterFrequencyGainQ
Low shelf105 Hz-0.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak1,893 Hz-1.4 dB2.72
Peak6,057 Hz+3.7 dB1.81

Bass target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz+3.1 dB0.70
High shelf10,000 Hz-4.6 dB0.70
Peak1,741 Hz-1.0 dB3.48
Peak5,441 Hz+5.1 dB1.37

Bright target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 80 out of 100, up from 24.

FilterFrequencyGainQ
Low shelf105 Hz-9.3 dB0.70
High shelf10,000 Hz-0.9 dB0.70
Peak23 Hz-1.4 dB1.91
Peak1,753 Hz-1.1 dB2.68
Peak3,503 Hz+1.5 dB4.11
Peak5,345 Hz+6.0 dB1.20
Peak6,887 Hz-2.4 dB5.69

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz+3.7 dB0.70
High shelf10,000 Hz+0.4 dB0.70
Peak4,638 Hz+6.0 dB1.20

Frequency Response

How the MOONDROP MAY DSP measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

MOONDROP MAY DSPHarman target
Measured frequency response of the MOONDROP MAY DSP-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of arn, ianfann, theaudiostore and treblewellxtended. Thanks to each of them for publishing their work.

More Moondrop headphones →